Influence of Alkali Ions on Tribological Properties of Silicon Surface

Tribological properties of surfaces (friction, adhesion and wear) provide challenging limitations to the design of reliable machines on the micro- and nanometer scale as the surface to volume area increases and volume, mass and inertia of the mobile parts decrease. This study reports on the reduction in the friction force of silicon surfaces after the alkali metal ion exposure in the form of aqueous solutions. A scanning force microscope equipped with a liquid cell was used to investigate the friction force and the pull-off force of a flat silicon surface immersed in water and in different alkali metal chlorides solutions: LiCl, NaCl and CsCl. The concentration ranged from 0.1 up to 1000 µmol/l. The changes in the free surface energy of the initial surface and of the modified surfaces after drying were determined from contact angle measurements and from the acid–base adhesion theory. In both cases, in the liquid environment and after drying of the exposed silicon substrates in air, the friction force is reduced by approximately 50 %. Our results provide new, fundamental insight into the exchange of surface termination layers in particular for tribology. Also it is suggested to use the procedure as a low-cost alternative to improve the tribological properties of the silicon surface in particular in applications where lubricating fluids are not appropriate, e.g., in nanomachines and devices

Enhanced Mechanical, Thermal and Electrical Properties of High-Entropy HfMoNbTaTiVWZr Thin Film Metallic Glass and its Nitrides

The inception of high-entropy alloy promises to push the boundaries for new alloy design with unprecedented properties. This work reports entropy stabilisation of an octonary refractory, HfMoNbTaTiVWZr, high-entropy thin film metallic glass, and derived nitride films. The thin film metallic glass exhibited exceptional ductility of approximate to 60% strain without fracture and compression strength of 3 GPa in micro-compression, due to the presence of high density and strength of bonds. The thin film metallic glass shows thermal stability up to 750 degrees C and resistance to Ar-ion irradiation. Nitriding during film deposition of HfMoNbTaTiVWZr thin film of strong nitride forming refractory elements results in deposition of nanocrystalline nitride films with compressive strength, hardness, and thermal stability of up to 10 GPa, 18.7 GPa, and 950 degrees C, respectively. The high amount of lattice distortion in the nitride films leads to its insulating behaviour with electrical conductivity as low as 200 S cm(-1) in the as-deposited film. The design and exceptional properties of the thin film metallic glass and derived nitride films may open up new avenues of development of bulk metallic glasses and the application of refractory-based high entropy thin films in structural and functional applications

6-(4-Nitro­phen­oxy)hexa­nol

The title compound, C12H17NO4, features an almost planar mol­ecule (r.m.s. deviation for all non-H atoms = 0.070 Å). All methyl­ene C—C bonds adopt an anti­periplanar conformation. In the crystal structure the mol­ecules lie in planes parallel to (12) and the packing is stabilized by O—H⋯O hydrogen bonds

Game Based Learning on Urban Sustainability: The "Sustain" Project

SUSTAIN is an ERASMUS+ project with an innovative perspective on urban sustainability. Its target is to promote the importance of sustainability on the everyday problems of the cities among the students of higher education, which are the policy makers of tomorrow and the ones that will shape the future. In order to achieve its goals, the research team will develop a course that will be based on an interactive game with an analytical style of education. This game will allow students to learn about transportation sustainability and societal metabolism through playing. In addition, the research team will develop small and illustrative simulation models, which will make the definitions more concrete and allow students to experiment in a consequence-free environment. It is a quite innovative and hybrid perspective way of learning, in the sense that it will combine game-based learning with a cognitive and analytical style of education

Automated reasoning on feature models

Software Product Line (SPL) Engineering has proved to be an effective method for software production. However, in the SPL community it is well recognized that variability in SPLs is increasing by the thousands. Hence, an automatic support is needed to deal with variability in SPL. Most of the current proposals for automatic reasoning on SPL are not devised to cope with extra– functional features. In this paper we introduce a proposal to model and reason on an SPL using constraint programming. We take into account functional and extra–functional features, improve current proposals and present a running, yet feasible implementation

DESCRIBING THE VERTICAL STRUCTURE OF INFORMAL SETTLEMENTS ON THE BASIS OF LIDAR DATA – A CASE STUDY FOR <i>FAVELAS</i> (SLUMS) IN SAO PAULO CITY

Cadastral mapping of favela’s agglomerated buildings in informal settlements at Level of Detail 1 (LoD1) usually requires specific surveys and extensive manual data processing. Therefore, there is a demand for including the favelas in the city map production on the basis of Lidar surveys, as well as the detection of their vertical growth. However, the currently developed algorithms for automatically extracting buildings from airborne Lidar data have mainly been tested only for regular building reconstruction. This study aims to develop a Lidar data processing pipeline enabling to compute metrics related to intraurban informal settlements. To do so, we present a procedure to generate favela’s buildings delineation, height, floors’ number and built area and apply them to six case studies in favela typo-morphologies. We conducted an exploratory analysis in order to obtain the adequate parameters of the processing pipeline and its evaluation, using open source, free license and self-developed software. The results are compared to reference data from the manual stereo plotting, achieving a quality index in the building reconstruction about 70%. We also calculated the growth density, measured by gross Floor Area Ratio index inside settlement, revealing values from 29% to 74% considering different time periods

Interrogation of gossypol therapy in glioblastoma implementing cell line and patient-derived tumour models

Background: Glioblastoma (GBM), being a highly vascularised and locally invasive tumour, is an attractive target for anti-angiogenic and anti-invasive therapies. The GBM/endothelial cell response to gossypol/temozolomide (TMZ) treatment was investigated with a particular aim to assess treatment effects on cancer hallmarks. Methods: Cell viability, endothelial tube formation and GBM tumour cell invasion were variously assessed following combined treatment in vitro. The U87MG-luc2 subcutaneous xenograft model was used to investigate therapeutic response in vivo. Viable tumour response to treatment was interrogated using immunohistochemistry. Combined treatment protocols were also tested in primary GBM patient-derived cultures. Results: An endothelial/GBM cell viability inhibitory effect, as well as an anti-angiogenic and anti-invasive response, to combined treatment have been demonstrated in vitro. A significantly greater anti-proliferative (P=0.020, P=0.030), anti-angiogenic (P=0.040, P<0.0001) and pro-apoptotic (P=0.0083, P=0.0149) response was observed when combined treatment was compared with single gossypol/TMZ treatment response, respectively. GBM cell line and patient-specific response to gossypol/TMZ treatment was observed. Conclusions: Our results indicate that response to a combined gossypol/TMZ treatment is related to inhibition of tumour-associated angiogenesis, invasion and proliferation and warrants further investigation as a novel targeted GBM treatment strategy

Patient-derived glioblastoma cells show significant heterogeneity in treatment responses to the inhibitor-of-apoptosis-protein antagonist birinapant.

BACKGROUND: Resistance to temozolomide (TMZ) greatly limits chemotherapeutic effectiveness in glioblastoma (GBM). Here we analysed the ability of the Inhibitor-of-apoptosis-protein (IAP) antagonist birinapant to enhance treatment responses to TMZ in both commercially available and patient-derived GBM cells. METHODS: Responses to TMZ and birinapant were analysed in a panel of commercial and patient-derived GBM cell lines using colorimetric viability assays, flow cytometry, morphological analysis and protein expression profiling of pro- and antiapoptotic proteins. Responses in vivo were analysed in an orthotopic xenograft GBM model. RESULTS: Single-agent treatment experiments categorised GBM cells into TMZ-sensitive cells, birinapant-sensitive cells, and cells that were insensitive to either treatment. Combination treatment allowed sensitisation to therapy in only a subset of resistant GBM cells. Cell death analysis identified three principal response patterns: Type A cells that readily activated caspase-8 and cell death in response to TMZ while addition of birinapant further sensitised the cells to TMZ-induced cell death; Type B cells that readily activated caspase-8 and cell death in response to birinapant but did not show further sensitisation with TMZ; and Type C cells that showed no significant cell death or moderately enhanced cell death in the combined treatment paradigm. Furthermore, in vivo, a Type C patient-derived cell line that was TMZ-insensitive in vitro and showed a strong sensitivity to TMZ and TMZ plus birinapant treatments. CONCLUSIONS: Our results demonstrate remarkable differences in responses of patient-derived GBM cells to birinapant single and combination treatments, and suggest that therapeutic responses in vivo may be greatly affected by the tumour microenvironment