24 research outputs found
Recommended from our members
The effect of branched carbon nanotubes as reinforcing nano-filler in polymer nanocomposites
This work discusses the mechanical and dissipative properties of nanocomposite materials made of a high-performance thermoplastic polymer (polybutylene terephthalate, PBT) integrated with branched carbon nanotubes (bCNTs) as nanofiller. The storage and loss moduli as well as the loss factor/damping ratio of the nanocomposites are experimentally characterized for increasing bCNT weight fractions (wt% bCNT) upon variations of the input cyclic strain amplitude and of the input frequency, respectively. The trends obtained for the nanocomposites mechanical properties indicate improvements both in storage and loss modulus by increasing the bCNT weight fraction from 0.5% to 2%. The striking differences between the damping capacities exhibited by CNT/polymer and bCNT/polymer nanocomposites are discussed to shed light onto the different underlined mechanics of the nanocomposites. Due to the stick–slip relative sliding motion of the polymer chains with respect to the straight CNTs, CNT/PBT nanocomposites are known to exhibit a peak in the damping vs. strain amplitude curves, past which, the damping capacity shows a monotonically increasing trend due to the conjectured sliding of the polymer crystals. On the other hand, we show for the first time that bCNT/PBT nanocomposites do not exhibit a peak in the damping capacity but rather a plateau after an initial drop at low strains. This behavior is attributed to the much reduced mobility of the branched CNTs and the lack of formation of crystalline structures around the bCNTs
Fourth Human Parechovirus Serotype
We identified a novel human parechovirus (HPeV) type (K251176-02) from a neonate with fever. Analysis of the complete genome showed K251176-02 to be a new HPeV genotype. Since K251176-02 could not be neutralized with antibodies against known HPeV serotypes 1–3, it should be classified as a fourth HPeV serotype
Phase transition of meshwork models for spherical membranes
We have studied two types of meshwork models by using the canonical Monte
Carlo simulation technique. The first meshwork model has elastic junctions,
which are composed of vertices, bonds, and triangles, while the second model
has rigid junctions, which are hexagonal (or pentagonal) rigid plates.
Two-dimensional elasticity is assumed only at the elastic junctions in the
first model, and no two-dimensional bending elasticity is assumed in the second
model. Both of the meshworks are of spherical topology. We find that both
models undergo a first-order collapsing transition between the smooth spherical
phase and the collapsed phase. The Hausdorff dimension of the smooth phase is
H\simeq 2 in both models as expected. It is also found that H\simeq 2 in the
collapsed phase of the second model, and that H is relatively larger than 2 in
the collapsed phase of the first model, but it remains in the physical bound,
i.e., H<3. Moreover, the first model undergoes a discontinuous surface
fluctuation transition at the same transition point as that of the collapsing
transition, while the second model undergoes a continuous transition of surface
fluctuation. This indicates that the phase structure of the meshwork model is
weakly dependent on the elasticity at the junctions.Comment: 21 pages, 12 figure
Direct-Bandgap 2D Silver-Bismuth Iodide Double Perovskite: The Structure-Directing Influence of an Oligothiophene Spacer Cation
Three-dimensional (3D) hybrid organic-inorganic lead halide perovskites (HOIPs) feature remarkable optoelectronic properties for solar energy conversion but suffer from long-standing issues of environmental stability and lead toxicity. Associated two-dimensional (2D) analogues are garnering increasing interest due to superior chemical stability, structural diversity, and broader property tunability. Toward lead-free 2D HOIPs, double perovskites (DPs) with mixed-valent dual metals are attractive. Translation of mixed-metal DPs to iodides, with their prospectively lower bandgaps, represents an important target for semiconducting halide perovskites, but has so far proven inaccessible using traditional spacer cations due to either intrinsic instability or formation of competing non-perovskite phases. Here, we demonstrate the first example of a 2D Ag-Bi iodide DP with a direct bandgap of 2.00(2) eV, templated by a layer of bifunctionalized oligothiophene cations, i.e., (bis-aminoethyl)bithiophene, through a collective influence of aromatic interactions, hydrogen bonding, bidentate tethering, and structural rigidity. Hybrid density functional theory calculations for the new material reveal a direct bandgap, consistent with the experimental value, and relatively flat band edges derived principally from Ag-d/I-p (valence band) and Bi-p/I-p (conduction band) states. This work opens up new avenues for exploring specifically designed organic cations to stabilize otherwise inaccessible 2D HOIPs with potential applications for optoelectronics
Bioinspired coupled helical coils for soft tissue engineering of tubular structures - Improved mechanical behavior of tubular collagen type I templates
Item does not contain fulltextThe design of constructs for tubular tissue engineering is challenging. Most biomaterials need to be reinforced with supporting structures such as knittings, meshes or electrospun material to comply with the mechanical demands of native tissues. In this study, coupled helical coils (CHCs) were manufactured to mimic collagen fiber orientation as found in nature. Monofilaments of different commercially available biodegradable polymers were wound and subsequently fused, resulting in right-handed and left-handed polymer helices fused together in joints where the filaments cross. CHCs of different polymer composition were tested to determine the tensile strength, strain recovery, hysteresis, compressive strength and degradation of CHCs of different composition. Subsequently, seamless and stable hybrid constructs consisting of PDSII(R) USP 2-0 CHCs embedded in porous collagen type I were produced. Compared to collagen alone, this hybrid showed superior strain recovery (93.5+/-0.9% vs 71.1+/-12.6% in longitudinal direction; 87.1+/-6.6% vs 57.2+/-4.6% in circumferential direction) and hysteresis (18.9+/-2.7% vs 51.1+/-12.0% in longitudinal direction; 11.5+/-4.6% vs 46.3+/-6.3% in circumferential direction). Furthermore, this hybrid construct showed an improved Young's modulus in both longitudinal (0.5+/-0.1MPavs 0.2+/-0.1MPa; 2.5-fold) and circumferential (1.65+/-0.07MPavs (2.9+/-0.3)x10-2MPa; 57-fold) direction, respectively, compared to templates created from collagen alone. Moreover, hybrid template characteristics could be modified by changing the CHC composition and CHCs were produced showing a mechanical behavior similar to the native ureter. CHC-enforced templates, which are easily tunable to meet different demands may be promising for tubular tissue engineering. STATEMENT OF SIGNIFICANCE: Most tubular constructs lack sufficient strength and tunability to comply with the mechanical demands of native tissues. Therefore, we embedded coupled helical coils (CHCs) produced from biodegradable polymers - to mimic collagen fiber orientation as found in nature - in collagen type I sponges. We show that the mechanical behavior of CHCs is very similar to native tissue and strengths structurally weak tubular constructs. The production procedure is relatively easy, reproducible and mechanical features can be controlled to meet different mechanical demands. This is promising in template manufacture, hence offering new opportunities in tissue engineering of tubular organs and preventing graft failure
The Impact of gamma-Irradiation and EtO Degassing on Tissue Remodeling of Collagen-based Hybrid Tubular Templates
Contains fulltext :
195631.pdf (Publisher’s version ) (Open Access
Characteristics and culture results of patients who had BSI.
<p><i>Abbreviations: A. baumannii =  Acinetobacter baumannii, E. cloacae =  Enterobacter cloacae, E. faecalis =  Enterococcus faecalis, K. pneumoniae =  Klebsiella pneumoniae, MRSA = Methicillin-resistant Staphylococcus aureus, MSSA = Methicillin-susceptible Staphylococcus aureus, P. mirabilis = Proteus mirabilis, S. aureus = Staphylococcus aureus, S. epidermidis = Staphylococcus epidermidis,</i></p><p>SJS =  Stevens Johnson syndrome; TEN =  toxic epidermal necrolysis; TB =  tuberculosis.</p
Genomic subtyping and therapeutic targeting of acute erythroleukemia
Acute erythroid leukemia (AEL) is a high-risk leukemia of poorly understood genetic basis, with controversy regarding diagnosis in the spectrum of myelodysplasia and myeloid leukemia. We compared genomic features of 159 childhood and adult AEL cases with non-AEL myeloid disorders and defined five age-related subgroups with distinct transcriptional profiles: adult, TP53 mutated; NPM1 mutated; KMT2A mutated/rearranged; adult, DDX41 mutated; and pediatric, NUP98 rearranged. Genomic features influenced outcome, with NPM1 mutations and HOXB9 overexpression being associated with a favorable prognosis and TP53, FLT3 or RB1 alterations associated with poor survival. Targetable signaling mutations were present in 45% of cases and included recurrent mutations of ALK and NTRK1, the latter of which drives erythroid leukemogenesis sensitive to TRK inhibition. This genomic landscape of AEL provides the framework for accurate diagnosis and risk stratification of this disease, and the rationale for testing targeted therapies in this high-risk leukemia.Ilaria Iacobucci … L. Bik To, Ian D. Lewis, Richard J. D’Andrea … Anna L. Brown, Hamish S. Scott, Christopher H. Hahn … Charles G. Mulligha