29 research outputs found
Three-sided pyramid wavefront sensor. II. Preliminary demonstration on the new CACTI testbed
The next generation of giant ground and space telescopes will have the
light-collecting power to detect and characterize potentially habitable
terrestrial exoplanets using high-contrast imaging for the first time. This
will only be achievable if the performance of Giant Segmented Mirror Telescopes
(GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full
potential. A key component of an ExAO system is the wavefront sensor (WFS),
which measures aberrations from atmospheric turbulence. A common choice in
current and next-generation instruments is the pyramid wavefront sensor (PWFS).
ExAO systems require high spatial and temporal sampling of wavefronts to
optimize performance, and as a result, require large detectors for the WFS. We
present a closed-loop testbed demonstration of a three-sided pyramid wavefront
sensor (3PWFS) as an alternative to the conventional four-sided pyramid
wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive
Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less
sensitive to read noise than the 4PWFS because it uses fewer detector pixels.
The 3PWFS has further benefits: a high-quality three-sided pyramid optic is
easier to manufacture than a four-sided pyramid. We detail the design of the
two components of the CACTI system, the adaptive optics simulator and the PWFS
testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was
performed on CACTI to study the performance of the 3PWFS to the 4PWFS in
varying strengths of turbulence using both the Raw Intensity and Slopes Map
signal processing methods. This experiment was repeated for a modulation radius
of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two
wavefront sensors is comparable if modal loop gains are tuned.Comment: 28 Pages, 15 Figures, and 4 Table
Correction active des discontinuités pupillaires des télescopes à miroir segmenté pour l’imagerie haut contraste et la haute résolution angulaire
Searching for extraterrestrial life through the observation and characterization of exoplanets is, amongst others, one of the major goal of the modern astrophysics. This quest translate from an instrumental point of view to the development of telescope capable of reaching higher angular resolution that what is actually ongoing. That is why the future projects of extremely large telescopes are using primary mirrors exceeding the 30 meters in diameter. Their conception is consequently based, for technical and technological reasons, on a segmented geometry. The segmentation of the primary mirror therefore implies a growing complexity of the structure of its pupil. In order to reach the optical quality required by the sciences cases of interest, taking into account and correct for the effects introduced by a poor alignment of the segments is mandatory, as the angular resolution of a non-cophased telescope is equivalent to the one obtained with a single segment. In this context, I develop in this manuscript two cophasing sensors allowing to measure and correct for the aberrations of piston, tip and tilt present on a segmented pupil. The first one, the Self-Coherent Camera - Phasing Sensor (SCC-PS), is based on a focal plane analysis of the signal. The second one, the ZELDA - Phasing Sensor (ZELDA-PS), is based on a pupil plane analysis of the signal. The results obtained by means of numerical simulations and the first results coming from the implementation of the SCC-PS on an optical bench are presented in this manuscript.La recherche de signes de vie extraterrestre par l'observation et la caractérisation d'exoplanètes est, entre autres, l'un des enjeux majeurs de l'astrophysique moderne. Cette quête se traduit de manière instrumentale par le développement de télescopes fournissant des résolutions angulaires supérieures à celles obtenues à l'heure actuelle. C'est pourquoi les projets de futurs très grands télescopes font usage de miroirs primaires dépassant les 30 mètres de diamètre. Leur conception est alors inévitablement basée, pour des raisons techniques et technologiques, sur une géométrie segmentée. De ce fait, la segmentation du miroir primaire implique une complexification des structures pupillaires du télescope. Dans le but d'atteindre les niveaux de qualité optique nécessaires aux applications scientifiques visées, la prise en compte et la correction des effets introduits par un mauvais alignement des segments est de prime importance puisque la résolution angulaire d'un télescope non cophasé serait équivalente à celle obtenue avec un segment individuel. Dans ce contexte, je développe dans cette thèse deux analyseurs de cophasage permettant de mesurer et de corriger les aberrations de piston, tip et tilt présentes sur une pupille segmentée. Le premier, nommé Self-Coherent Camera - Phasing Sensor (SCC-PS), est basé sur une analyse du signal en plan focal. Le second, nommé ZELDA - Phasing Sensor (ZELDA-PS), repose quant à lui sur une analyse du signal en plan pupille. Sont présentés dans ce manuscrit les résultats obtenus à l'aide de simulations numériques ainsi que ceux issus de l'implémentation de la SCC-PS sur un banc d'optique d'essai
Active correction of pupil discontinuities on segmented telescopes for high contrast imaging and high angular resolution
La recherche de signes de vie extraterrestre par l'observation et la caractérisation d'exoplanètes est, entre autres, l'un des enjeux majeurs de l'astrophysique moderne. Cette quête se traduit de manière instrumentale par le développement de télescopes fournissant des résolutions angulaires supérieures à celles obtenues à l'heure actuelle. C'est pourquoi les projets de futurs très grands télescopes font usage de miroirs primaires dépassant les 30 mètres de diamètre. Leur conception est alors inévitablement basée, pour des raisons techniques et technologiques, sur une géométrie segmentée. De ce fait, la segmentation du miroir primaire implique une complexification des structures pupillaires du télescope. Dans le but d'atteindre les niveaux de qualité optique nécessaires aux applications scientifiques visées, la prise en compte et la correction des effets introduits par un mauvais alignement des segments est de prime importance puisque la résolution angulaire d'un télescope non cophasé serait équivalente à celle obtenue avec un segment individuel. Dans ce contexte, je développe dans cette thèse deux analyseurs de cophasage permettant de mesurer et de corriger les aberrations de piston, tip et tilt présentes sur une pupille segmentée. Le premier, nommé Self-Coherent Camera - Phasing Sensor (SCC-PS), est basé sur une analyse du signal en plan focal. Le second, nommé ZELDA - Phasing Sensor (ZELDA-PS), repose quant à lui sur une analyse du signal en plan pupille. Sont présentés dans ce manuscrit les résultats obtenus à l'aide de simulations numériques ainsi que ceux issus de l'implémentation de la SCC-PS sur un banc d'optique d'essai.Searching for extraterrestrial life through the observation and characterization of exoplanets is, amongst others, one of the major goal of the modern astrophysics. This quest translate from an instrumental point of view to the development of telescope capable of reaching higher angular resolution that what is actually ongoing. That is why the future projects of extremely large telescopes are using primary mirrors exceeding the 30 meters in diameter. Their conception is consequently based, for technical and technological reasons, on a segmented geometry. The segmentation of the primary mirror therefore implies a growing complexity of the structure of its pupil. In order to reach the optical quality required by the sciences cases of interest, taking into account and correct for the effects introduced by a poor alignment of the segments is mandatory, as the angular resolution of a non-cophased telescope is equivalent to the one obtained with a single segment. In this context, I develop in this manuscript two cophasing sensors allowing to measure and correct for the aberrations of piston, tip and tilt present on a segmented pupil. The first one, the Self-Coherent Camera - Phasing Sensor (SCC-PS), is based on a focal plane analysis of the signal. The second one, the ZELDA - Phasing Sensor (ZELDA-PS), is based on a pupil plane analysis of the signal. The results obtained by means of numerical simulations and the first results coming from the implementation of the SCC-PS on an optical bench are presented in this manuscript
Analytical decomposition of Zernike and hexagonal modes over a hexagonal segmented optical aperture
International audienc
Recommended from our members
Self-Coherent Camera as a focal plane phasing sensor - Overview and early comparison with the Zernike Phase Contrast Sensor
In order to achieve the high performance required for the astronomical science programs with coming Extremely Large Telescopes (ELTs), the errors due to segment misalignment must be reduced to tens of nm. Therefore the development of new co-phasing techniques is of critical importance for ground-based telescopes, and to a large extent for future space-based missions. We propose a new co-phasing method directly exploiting the scientific image delivered by the Self-Coherent Camera (SCC) by adequately combining segment misalignment estimators (piston and tip/tilt) and image processing. The Self-Coherent Camera Phasing Sensor (SCC-PS) is shown to be capable of estimating accurately and simultaneously piston and tip/tilt misalignments and to correct them in close-loop operation in a few iterations. By contrast to several phasing sensor concepts the SCC-PS does not require any a priori on the signal at the segment boundaries, or a dedicated optical path. The SCC-PS is a non-invasive concept that works directly on the scientific image of the instrument, either in a coronagrahic or a non-coronagraphic observing mode. The primary results obtained in this study are very promising and demonstrate that the SCC-PS is a serious candidate for segment co-phasing at the instrument level or at the telescope level for both ground- and space-based applications. Applications of the estimators and algorithm developed for the SCC-PS seem to be possible to other on-segment aberration measurement. Early studies are already in progress to adapt these processes
Recommended from our members
Self-Coherent Camera as a focal plane phasing sensor - Overview and early comparison with the Zernike Phase Contrast Sensor
In order to achieve the high performance required for the astronomical science programs with coming Extremely Large Telescopes (ELTs), the errors due to segment misalignment must be reduced to tens of nm. Therefore the development of new co-phasing techniques is of critical importance for ground-based telescopes, and to a large extent for future space-based missions. We propose a new co-phasing method directly exploiting the scientific image delivered by the Self-Coherent Camera (SCC) by adequately combining segment misalignment estimators (piston and tip/tilt) and image processing. The Self-Coherent Camera Phasing Sensor (SCC-PS) is shown to be capable of estimating accurately and simultaneously piston and tip/tilt misalignments and to correct them in close-loop operation in a few iterations. By contrast to several phasing sensor concepts the SCC-PS does not require any a priori on the signal at the segment boundaries, or a dedicated optical path. The SCC-PS is a non-invasive concept that works directly on the scientific image of the instrument, either in a coronagrahic or a non-coronagraphic observing mode. The primary results obtained in this study are very promising and demonstrate that the SCC-PS is a serious candidate for segment co-phasing at the instrument level or at the telescope level for both ground- and space-based applications. Applications of the estimators and algorithm developed for the SCC-PS seem to be possible to other on-segment aberration measurement. Early studies are already in progress to adapt these processes
The self-coherent camera as a focal plane phasing sensor
International audienceExoplanets imaging requires very high angular resolution that will be reached with the forthcoming generation of extremely large telescopes. In order to achieve the high performance required for the astronomical science programs, the errors due to segment misalignment must be reduced to tens of nm. Therefore the development of new co-phasing techniques is of critical importance for ground-based telescopes, and to a large extent for future space-based missions. We propose a new co-phasing method directly exploiting the scientific image delivered by the self coherent camera (SCC) by adequately combining segment misalignment estimators (piston and tip/tilt) and image processing. The extension of the SCC concept towards a co-phasing sensor is presented and its parameter space and performance for phasing a segmented telescope are studied by means of intensive numerical simulations. The self-coherent camera phasing sensor (SCC-PS) is shown to be capable of estimating accurately and simultaneously piston and tip/tilt misalignments and to correct them in close-loop operation in a few iterations. The final residual RMS values over the pupil obtained with the SCC-PS are compared to similar simulations of another co-phasing sensor and we show that the SCC-PS gives the same or even better results by requiring less iterations. By contrast to several phasing sensor concepts the SCC-PS does not require any a priori knowledge on the signal at the segment boundaries, or a dedicated optical path. The SCC-PS is a non-invasive concept that works directly on the scientific image of the instrument, either in a coronagrahic or a non-coronagraphic observing mode. The primary results obtained in this study are very promising and demonstrate that the SCC-PS is a serious candidate for segment co-phasing at the instrument level or at the telescope level for both ground- and space-based applications