Greenhouse Gas Balance of Sphagnum Farming on Highly Decomposed Peat at Former Peat Extraction Sites

For two years, we quantified the exchange of carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) at two different large-scale Sphagnum farming sites. At both, peat extraction left a shallow layer of highly decomposed peat and low hydraulic conductivities. One site was characterized by preceding multi-annual inundation and irrigated by ditches, while the other one was inoculated directly after peat extraction and irrigated by ditches and drip irrigation. Further, GHG emissions from an irrigation polder and the effect of harvesting Sphagnum donor material at a near-natural reference site were determined. GHG mitigation potentials lag behind the results of less decomposed sites, although our results were also affected by the extraordinary hot and dry summer 2018. CO2 exchanges ranged between -0.6 and 2.2 t CO2-C ha−1 y−1 and were mainly influenced by low water table depths. CH4 emissions were low with the exception of plots with higher Eriophorum covers, while fluctuating water tables and poorly developing plant covers led to considerable N2O emissions at the ditch irrigation site. The removal of the upper vegetation at the near-natural site resulted in increased CH4 emissions and, on average, lowered CO2 emissions. Overall, best plant growth and lowest GHG emissions were measured at the previously inundated site. At the other site, drip irrigation provided more favourable conditions than ditch irrigation. The size of the area needed for water management (ditches, polders) strongly affected the areal GHG balances. We conclude that Sphagnum farming on highly decomposed peat is possible but requires elaborate water management. © 2021, The Author(s)

К определению поверхностного натяжения, объема и площади криволинейной поверхности по форме сидячих пузырьков или висячих капель

The multi-user facility EXPOSE-E was designed by the European Space Agency to enable astrobiology research in space (low-Earth orbit). On 7 February 2008, EXPOSE-E was carried to the International Space Station (ISS) on the European Technology Exposure Facility (EuTEF) platform in the cargo bay of Space Shuttle STS-122 Atlantis. The facility was installed at the starboard cone of the Columbus module by extravehicular activity, where it remained in space for 1.5 years. EXPOSE-E was returned to Earth with STS-128 Discovery on 12 September 2009 for subsequent sample analysis. EXPOSE-E provided accommodation in three exposure trays for a variety of astrobiological test samples that were exposed to selected space conditions: either to space vacuum, solar electromagnetic radiation at > 110nm and cosmic radiation (trays 1 and 3) or to simulated martian surface conditions (tray 2). Data on UV radiation, cosmic radiation, and temperature were measured every 10 s and downlinked by telemetry. A parallel mission ground reference (MGR) experiment was performed on ground with a parallel set of hardware and samples under simulated space conditions. EXPOSE-E performed a successful 1.5-year mission in space

The astrobiological mission EXPOSE-R on board of the International Space Station

EXPOSE-R flew as the second of the European Space Agency (ESA) EXPOSE multi-user facilities on the International Space Station. During the mission on the external URM-D platform of the Zvezda service module, samples of eight international astrobiology experiments selected by ESA and one Russian guest experiment were exposed to low Earth orbit space parameters from March 10th, 2009 to January 21st, 2011. EXPOSE-R accommodated a total of 1220 samples for exposure to selected space conditions and combinations, including space vacuum, temperature cycles through 273K, cosmic radiation, solar electromagnetic radiation at >110, >170 or >200nm at various fluences up to GJm−2. Samples ranged from chemical compounds via unicellular organisms and multicellular mosquito larvae and seeds to passive radiation dosimeters. Additionally, one active radiation measurement instrument was accommodated on EXPOSE-R and commanded from ground in accordance with the facility itself. Data on ultraviolet radiation, cosmic radiation and temperature were measured every 10s and downlinked by telemetry and data carrier every few months. The EXPOSE-R trays and samples returned to Earth on March 9th, 2011 with Shuttle flight, Space Transportation System (STS)-133/ULF 5, Discovery, after successful total mission duration of 27 months in space. The samples were analysed in the individual investigators laboratories. A parallel Mission Ground Reference experiment was performed on ground with a parallel set of hardware and samples under simulated space conditions following to the data transmitted from the flight missio

Digitalisierung beruflicher Lern- und Arbeitsprozesse. Impulse aus der Bauwirtschaft und anderen gewerblich-technischen Sektoren

Der Sammelband stellt aktuelle Ansätze zum digital unterstützten beruflichen Lernen dar. Die Beiträge geben Einblicke in die dynamische Entwicklung der Schnittstellen von Erwerbsarbeit und beruflicher Aus-, Fort- und Weiterbildung im Kontext der Digitalisierung Arbeits- und Lernmitteln. Der Band schließt damit an die 2019 ebenfalls im Universitätsverlag der Technischen Universität Berlin erschienene Publikation „Berufsbildung am Bau digital“ (hrsg. von Bernd Mahrin und Johannes Meyser) an. Das erste Kapitel erörtert grundsätzliche didaktische Fragen zu digital unterstütztem Lernen und Arbeiten einschließlich der Rahmenbedingungen. Im zweiten Kapitel schließen sich Beiträge zur Kapazitätsentwicklung, zu Standards und zu digitalen Werkzeugen an. Das dritte Kapitel widmet sich konkreten Einzellösungen mit starkem Praxisbezug und hohem Transferpotenzial zum digitalisierten Arbeiten und Lernen im Bausektor und im Metallbereich. Das abschließende vierte Kapitel präsentiert übergreifend nutzbare und frei zugängliche Online-Angebote wie einen Medienpool für Bildungszwecke, eine Lernmedien-Datenbank und ein hybrides Lernsystem mit virtuellem 3D-Gebäudemodell. Das Buch ist entstanden im Rahmen des durch das Bundesministerium für Bildung und Forschung und den Europäischen Sozialfonds geförderten Projektes DigiBAU – Digitales Bauberufliches Lernen und Arbeiten. (DIPF/Orig.)The anthology presents current approaches to digitally supported professional learning. The articles provide insights into the dynamic development of the interfaces between gainful employment and vocational training and further education in the context of digitization of work and learning aids. The volume is thus connected to the publication “Berufsbildung am Bau digital” (edited by Bernd Mahrin and Johannes Meyser), which was published in 2019 by the University Press of the Technische Universität Berlin. The first chapter discusses fundamental didactic questions about digitally supported learning and working, including the framework conditions. The second chapter picks contributions on capacity development, standards, and digital tools out as central themes. The third chapter is dedicated to concrete specific solutions with strong practical relevance and high transfer potential for digitized work and learning in the construction sector and in the metal sector. The final fourth chapter presents comprehensive and freely accessible online offers such as a media pool for educational purposes, a learning media database and a hybrid learning system with a virtual 3D building model. The book was created as part of the DigiBAU project - digital vocational learning and working in the field of construction - funded by the German Federal Ministry of Education and Research and the European Social Fund. (DIPF/Orig.

Biological Earth observation with animal sensors

Space-based tracking technology using low-cost miniature tags is now delivering data on fine-scale animal movement at near-global scale. Linked with remotely sensed environmental data, this offers a biological lens on habitat integrity and connectivity for conservation and human health; a global network of animal sentinels of environmen-tal change

EXPOSE, an Astrobiological Exposure Facility on the International Space Station - from Proposal to Flight

Following an European Space Agency announcement of opportunity in 1996 for ”Externally mounted payloads for 1st utilization phase” on the International Space Station (ISS), scientists working in the fields of astrobiology proposed experiments aiming at longterm exposure of a variety of chemical compounds and extremely resistant microorganisms to the hostile space environment. The ESA exposure facility EXPOSE was built and an operations´ concept was prepared. The EXPOSE experiments were developed through an intensive pre-flight experiment verification test program. 12 years later, two sets of astrobiological experiments in two EXPOSE facilities have been successfully launched to the ISS for external exposure for up to 1.5 years. EXPOSE-E, now installed at the balcony of the European Columbus module, was launched in February 2008, while EXPOSE-R took off to the ISS in November 2008 and was installed on the external URM-D platform of the Russian Zvezda module in March 2009

The astrobiological mission EXPOSE-R on board of the International Space Station

EXPOSE-R flew as the second of the European Space Agency (ESA) EXPOSE multi-user facilities on the International Space Station. During the mission on the external URM-D platform of the Zvezda service module, samples of eight international astrobiology experiments selected by ESA and one Russian guest experiment were exposed to low Earth orbit space parameters from March 10th, 2009 to January 21st, 2011. EXPOSE-R accommodated a total of 1220 samples for exposure to selected space conditions and combinations, including space vacuum, temperature cycles through 273 K, cosmic radiation, solar electromagnetic radiation at >110, >170 or >200 nm at various fluences up to GJ m⁻². Samples ranged from chemical compounds via unicellular organisms and multicellular mosquito larvae and seeds to passive radiation dosimeters. Additionally, one active radiation measurement instrument was accommodated on EXPOSE-R and commanded from ground in accordance with the facility itself. Data on ultraviolet radiation, cosmic radiation and temperature were measured every 10 s and downlinked by telemetry and data carrier every few months. The EXPOSE-R trays and samples returned to Earth on March 9th, 2011 with Shuttle flight, Space Transportation System (STS)-133/ULF 5, Discovery, after successful total mission duration of 27 months in space. The samples were analysed in the individual investigators laboratories. A parallel Mission Ground Reference experiment was performed on ground with a parallel set of hardware and samples under simulated space conditions following to the data transmitted from the flight mission