Surface Transformations and Water Uptake on Liquid and Solid Butanol near the Melting Temperature

Water interactions with organic surfaces are of central importance in biological systems and many Earth system processes. Here we describe experimental studies of water collisions and uptake kinetics on liquid and solid butanol from 160 to 200 K. Hyperthermal D2O molecules (0.32 eV) undergo efficient trapping on both solid and liquid butanol, and only a minor fraction scatters inelastically after an 80% loss of kinetic energy to surface modes. Trapped molecules either desorb within a few ms, or are taken up by the butanol phase during longer times. The water uptake and surface residence time increase with temperature above 180 K indicating melting of the butanol surface 4.5 K below the bulk melting temperature. Water uptake changes gradually across the melting point and trapped molecules are rapidly lost by diffusion into the liquid above 190 K. This indicates that liquid butanol maintains a surface phase with limited water permeability up to 5.5 K above the melting point. These surface observations are indicative of an incremental change from solid to liquid butanol over a range of 10 K straddling the bulk melting temperature, in contrast to the behavior of bulk butanol and previously studied materials.Comment: 28 pages, 4 figures + introduction figur

Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler

The effect of the addition of chlorine and/or sulfur to the fuel on fly ash composition, deposit formation, and superheater corrosion has been studied during biomass combustion in a circulating fluidized-bed boiler. The chlorine (HCl (aq)) and sulfur (SO2 (g)) were added in proportions of relevance for the potassium chemistry. The composition of the bottom and the fly ashes was analyzed. Gas and particle measurements were performed downstream of the cyclone before the convection pass and the flue gas composition was recorded in the stack with a series of standard instruments and an FTIR analyzer. At the position downstream of the cyclone, a deposit probe was situated, simulating a superheater tube. Deposits on the probe and initial corrosion were examined. It is concluded that addition of sulfur and chlorine increases the formation of submicron particles leading to deposition of potassium sulfate and chloride. The results compare well with earlier work based on laboratory-scale experiments concerning effects of chlorine and sulfur on potassium chemistry

Alkali interactions with a calcium manganite oxygen carrier used in chemical looping combustion

Chemical-Looping Combustion (CLC) of biofuels is a promising technology for cost-efficient CO2 separation and can lead to negative CO2 emissions when combined with carbon capture and storage. A potential challenge in developing CLC technology is the effects of alkali metal-containing compounds released during fuel conversion. This study investigates the interactions between alkali and an oxygen carrier (OC), CaMn0.775Ti0.125Mg0.1O3-δ, to better understand the fate of alkali in CLC. A laboratory-scale fluidized bed reactor is operated at 800–900 \ub0C in oxidizing, reducing and inert atmospheres to mimic CLC conditions. Alkali is fed to the reactor as aerosol KCl particles, and alkali in the exhaust is measured online with a surface ionization detector. The alkali concentration changes with gas environment, temperature, and alkali loading, and the concentration profile has excellent reproducibility over repeated redox cycles. Alkali-OC interactions are dominated by alkali uptake under most conditions, except for a release during OC reduction. Uptake is significant during stable reducing conditions, and is limited under oxidizing conditions. The total uptake during a redox cycle is favored by a high alkali loading, while the influence of temperature is weak. The implications for the understanding of alkali behavior in CLC and further development are discussed

Alkali-wall interactions in a laboratory-scale reactor for chemical looping combustion studies

Alkali metal-containing compounds are readily released during thermal conversion of solid fuels, and may have both detrimental and beneficial effects on chemical looping combustion. Here, we characterize alkali interactions with the inner walls of a laboratory-scale reactor under oxidizing, reducing and inert conditions at temperatures up to 900 \ub0C. KCl aerosol particles are continuously introduced to the stainless steel reactor and the alkali concentration is measured on-line with a surface ionization detector. Aerosol particles evaporate at temperatures above 500 \ub0C and KCl molecules rapidly diffuse to the reactor wall. Up to 92% of the alkali reaching the wall below 700 \ub0C remains adsorbed, while re-evaporation is important at higher temperatures, where up to 74% remains adsorbed. Transient changes in alkali concentration are observed during repeated redox cycles, which are associated with changes in chemical composition of the wall material. Metal oxides on the reactor wall are partially depleted under reducing conditions, which allow for the formation of a new potassium-rich phase that is stable in a reducing atmosphere, but not under inert conditions. The observed wall effects are concluded to be extensive and include major transient effects depending on gas composition, and the implications for laboratory studies and improved experimental methodology are discussed

Collision Dynamics and Solvation of Water Molecules in a Liquid Methanol Film

Environmental molecular beam experiments are used to examine water interactions with liquid methanol films at temperatures from 170 K to 190 K. We find that water molecules with 0.32 eV incident kinetic energy are efficiently trapped by the liquid methanol. The scattering process is characterized by an efficient loss of energy to surface modes with a minor component of the incident beam that is inelastically scattered. Thermal desorption of water molecules has a well characterized Arrhenius form with an activation energy of 0.47{\pm}0.11 eV and pre-exponential factor of 4.6 {\times} 10^(15{\pm}3) s^(-1). We also observe a temperature dependent incorporation of incident water into the methanol layer. The implication for fundamental studies and environmental applications is that even an alcohol as simple as methanol can exhibit complex and temperature dependent surfactant behavior.Comment: 8 pages, 5 figure

A cross-sectional study in 18 patients with typical and mild forms of nemaline myopathy in the Netherlands

Nemaline myopathy (NM) is a congenital myopathy with generalised muscle weakness, most pronounced in neck flexor, bulbar and respiratory muscles. The aim of this cross-sectional study was to assess the Dutch NM patient cohort. We assessed medical history, physical examination, quality of life (QoL), fatigue severity, motor function (MFM), and respiratory muscle function. We included 18 of the 28 identified patients (13 females (11-67 years old); five males (31-74 years old)) with typical or mild NM and eight different genotypes. Nine patients (50 %) used a wheelchair, eight patients (44 %) used mechanical ventilation, and four patients (22 %) were on tube feeding. Spinal deformities were found in 14 patients (78 %). The median Medical Research Council (MRC) sum score was 38/60 [interquartile range 32-51] in typical and 48/60 [44-50] in mild NM. The experienced QoL was lower and fatigue severity was higher than reference values of the healthy population. The total MFM score was 55 % [49-94] in typical and 88 % [72-93] in mild NM. Most of the patients who performed spirometry had a restrictive lung function pattern (11/15). This identification and characterisation of the Dutch NM patient cohort is important for international collaboration and can guide the design of future clinical trials

Prevalence of lipid abnormalities before and after introduction of lipid modifying therapy among Swedish patients with dyslipidemia (PRIMULA)

<p>Abstract</p> <p>Background</p> <p>Data on the prevalence of dyslipidemia and attainment of goal/normal lipid levels in a Swedish population are scarce. The objective of this study is to estimate the prevalence of dyslipidemia and attainment of goal/normal lipid levels in patients treated with lipid modifying therapy (LMT).</p> <p>Methods</p> <p>This longitudinal retrospective observational study covers time periods before and after treatment. Data were collected from 1994-2007 electronic patient records in public primary healthcare centers in Uppsala County, Sweden. Patients were included if they had been treated with LMT and had at least one lipid abnormality indicating dyslipidemia and if complete lipid profile data were available. Thresholds levels for lipids were defined as per Swedish guidelines.</p> <p>Results</p> <p>Among 5,424 patients included, at baseline, the prevalence of dyslipidemia (≥1 lipid abnormality) was by definition 100%, while this figure was 82% at follow-up. At baseline, 60% had elevated low-density lipoprotein (LDL-C) combined with low high-density lipoprotein (HDL-C) and/or elevated triglycerides (TG s), corresponding figure at follow-up was 36%. Low HDL-C and/or elevated TGs at follow-up remained at 69% for patients with type 2 diabetes mellitus (T2DM), 50% among patients with coronary heart disease (CHD) and 66% among patients with 10 year CHD risk >20%. Of the total sample, 40% attained goal levels of LDL-C and 18% attained goal/normal levels on all three lipid parameters.</p> <p>Conclusions</p> <p>Focusing therapy on LDL-C reduction allows 40% of patients to achieve LDL-C goal and helps reducing triglyceride levels. Almost 60% of patients experience persistent HDL-C and/or triglyceride abnormality independently of LDL-C levels and could be candidates for additional treatments.</p

Ice structures, patterns, and processes: A view across the ice-fields

We look ahead from the frontiers of research on ice dynamics in its broadest sense; on the structures of ice, the patterns or morphologies it may assume, and the physical and chemical processes in which it is involved. We highlight open questions in the various fields of ice research in nature; ranging from terrestrial and oceanic ice on Earth, to ice in the atmosphere, to ice on other solar system bodies and in interstellar space