Self-assembly of mechanoplasmonic bacterial cellulose-metal nanoparticle composites

Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC-NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self-assembly strategy is described for fabrication of complex and well-defined BC-NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self-assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near-field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies

Fluorescence Correlation Spectroscopy Combined with Multiphoton Laser Scanning Microscopy—A Practical Guideline

Multiphoton laser scanning microscopy (MPM) has opened up an optical window into biological tissues; however, imaging is primarily qualitative. Cell morphology and tissue architectures can be clearly visualized but quantitative analysis of actual concentration and fluorophore distribution is indecisive. Fluorescence correlation spectroscopy (FCS) is a highly sensitive photophysical methodology employed to study molecular parameters such as diffusion characteristics on the single molecule level. In combination with laser scanning microscopy, and MPM in particular, FCS has been referred to as a standard and highly useful tool in biomedical research to study diffusion and molecular interaction with subcellular precision. Despite several proof-of-concept reports on the topic, the implementation of MPM-FCS is far from straightforward. This practical guideline aims to clarify the conceptual principles and define experimental operating conditions when implementing MPM-FCS. Validation experiments in Rhodamine solutions were performed on an experimental MPM-FCS platform investigating the effects of objective lens, fluorophore concentration and laser power. An approach based on analysis of time-correlated single photon counting data is presented. It is shown that the requirement of high numerical aperture (NA) objective lenses is a primary limitation that restricts field of view, working distance and concentration range. Within these restrictions the data follows the predicted theory of Poisson distribution. The observed dependence on laser power is understood in the context of perturbation on the effective focal volume. In addition, a novel interpretation of the effect on measured diffusion time is presented. Overall, the challenges and limitations observed in this study reduce the versatility of MPM-FCS targeting biomedical research in complex and deep tissue—being the general strength of MPM in general. However, based on the systematic investigations and fundamental insights this report can serve as a practical guide and inspire future research, potentially overcoming the technical limitations and ultimately allowing MPM-FCS to become a highly useful tool in biomedical research

Optimizing Ti:Sapphire laser for quantitative biomedical imaging

Ti:Sapphire lasers are powerful tools in the field of scientific research and industry for a wide range of applications such as spectroscopic studies and microscopic imaging where tunable near-infrared light is required. To push the limits of the applicability of Ti:Sapphire lasers, fundamental understanding of the construction and operation is required. This paper presents two projects, (i) dealing with the building and characterization of custom built tunable narrow linewidth Ti:Sapphire laser for fundamental spectroscopy studies; and the second project (ii) the implementation of a fs-pulsed commercial Ti:Sapphire laser in an experimental multiphoton microscopy platform. For the narrow linewidth laser, a gold-plated diffraction grating with a Littrow geometry was implemented for highresolution wavelength selection. We demonstrate that the laser is tunable between 700 to 950 nm, operating in a pulsed mode with a repetition rate of 1 kHz and maximum average output power around 350 mW. The output linewidth was reduced from 6 GHz to 1.5 GHz by inserting an additional 6 mm thick etalon. The bandwidth was measured by means of a scanning Fabry Perot interferometer. Future work will focus on using a fs-pulsed commercial Ti:Sapphire laser (Tsunami, Spectra physics), operating at 80 MHz and maximum average output power around 1 W, for implementation in an experimental multiphoton microscopy set up dedicated for biomedical applications. Special focus will be on controlling pulse duration and dispersion in the optical components and biological tissue using pulse compression. Furthermore, time correlated analysis of the biological samples will be performed with the help of time correlated single photon counting module (SPCM, Becker&Hickl;) which will give a novel dimension in quantitative biomedical imaging

Self-Assembly of Mechanoplasmonic Bacterial Cellulose-Metal Nanoparticle Composites

Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC-NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self-assembly strategy is described for fabrication of complex and well-defined BC-NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self-assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near-field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies.Funding Agencies|Swedish Foundation for Strategic Research (SFF)Swedish Foundation for Strategic Research [FFL15-0026, RMX18-0039]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009-00971]; VinnovaVinnova [2016-05156]; Knut and Alice Wallenberg FoundationKnut &amp; Alice Wallenberg Foundation [KAW 2016.0231]; Swedish Research CouncilSwedish Research Council [2017-05178, 2015-05002]; Spanish Ministerio de Ciencia, Innovacion y Universidades (MICINN) [MAT2016-77391-R]; Severo Ochoa Centres of Excellence programme - Spanish Research Agency (AEI) [SEV-2017-0706]</p