Evaluation of Metals Bioavailability in Agricultural Soil Treated with Wood Ash

In the present work, we aimed to study the effect of quantitative changes of micronutrients (Cu, Zn, Mn) in soil and plants caused by wood ash applied into the soil in increasing doses. A pot experiment with medium textured soil, white mustard as a test plant and six amendment treatments (doses of wood ash: 0, 1, 5, 10, 20, 30 Mg·ha-1) was performed. Total contents of Cu, Zn and Mn were determined in soil and plant samples. Single (DTPA and HCl) and sequential (BCR) extractions were used to evaluate the available amounts of metals and their distribution in fractions. A plant’s ability to accumulate metals from soils was estimated using the bioconcentration factor (BCF), which is defined as the ratio of metal concentration in the plants to that in soil. The increasing doses of wood ash increased total and available contents of trace elements, especially Cu and Mn. The distribution of metals among particular fractions depended mainly on their geochemical character. The highest content of Cu was found in the reducible and oxidisable fractions, whereas, the greatest amounts of Zn and Mn were in the exchangeable and reducible fractions, and the lowest in the oxidisable fraction. Despite small wood ash influence on metal distribution in the individual soil fractions, increasing doses of wood ash increased the amounts of Cu, Zn, Mn in easily soluble fractions, which are potentially available to plants. As a result of wood ash increasing doses application, the higher amounts of Cu, Zn and Mn in plant tissues were found. However, only in the case of Zn, the value of BCF indicated on such accumulation in the plants

Structural and textural evolution of zirconia nanocrystals induced by thermal treatment

Nanometric tetragonal and monoclinic zirconia was synthesized from zirconyl chloride by the modified forced hydrolysis method. Phase transitions and morphological changes accompanying zirconia calcination in the temperaure range 600–1000 °C were studied by XRD, HR-TEM techniques and N2-porosimetry. Ageing of the amorphous hydrous zirconia at 100 °C for 48 h in the mother solution and its subsequent calcination at 600 °C for 6 h strongly favoured formation of single-phase tetragonal ZrO2 of the thermal stability enhanced by 250 °C. Influence of the calcination temperature on phase composition, grain size, grain boundaries and pore structure of the resultant ZrO2 material was analyzed

A 12-year old girl with severe plaque psoriasis and Down syndrome treated successfuly with etanercept

Microsporum (M.) canis is the most common fungus to cause tinea capitis in Europe, especially in the Mediterranean region and South and Central Europe. Fungal scalp infections caused by M. canis tend to be non-inflammatory. Recently, a growing number of cases of tinea capitis characterized by inflammatory infection caused by M. canis and M. gypseum have been registered. We present a case of highly inflammatory tinea capitis, also known as kerion celsi, caused by M. canis in a 6-year-old-patient. Scalp infections due to M. canis are a growing problem in dermatological practice. Changes in epidemiology, etiology, and clinical patterns of fungal infections due to M. canis are significant. Greater awareness of this problem is needed in order to establish proper diagnosis and successful treatment strategy for these patients. </p

A 12-year old girl with severe plaque psoriasis and Down syndrome treated successfuly with etanercept

Microsporum (M.) canis is the most common fungus to cause tinea capitis in Europe, especially in the Mediterranean region and South and Central Europe. Fungal scalp infections caused by M. canis tend to be non-inflammatory. Recently, a growing number of cases of tinea capitis characterized by inflammatory infection caused by M. canis and M. gypseum have been registered. We present a case of highly inflammatory tinea capitis, also known as kerion celsi, caused by M. canis in a 6-year-old-patient. Scalp infections due to M. canis are a growing problem in dermatological practice. Changes in epidemiology, etiology, and clinical patterns of fungal infections due to M. canis are significant. Greater awareness of this problem is needed in order to establish proper diagnosis and successful treatment strategy for these patients. </p

High Frequency Ultrasonography of the Skin and Its Role as an Auxillary Tool in Diagnosis of Benign and Malignant Cutaneous Tumors – A Comparison of Two Clinical Cases

The number of dermatologic entities that can be studied by ultrasound examination (US) of the skin is increasing. Conventional US and high frequency US (HFUS) are considered useful additional tools in improving the diagnosis and management of common benign and malignant skin tumors. US may help in positive and differential diagnosis of primary melanocytic neoplasms and of locoregional spread in melanoma patients. US preoperative evaluation of primary melanoma thickness correlates with histologically estimated melanoma thickness, and can help determine surgical margins and indications for sentinel lymph node biopsy. It is also useful during follow-up after surgical treatment for early detection of recurrence or metastases. In this case report, we present two cases of skin lesions clinically suspicious for malignancy. The first lesion was a round nodule 3 mm in diameter, resembling a blue nevus. In HFUS it was well delimited, hypoechoic, and well vascularized. The second lesion presented as an elevated, well-circumscribed nodule, 5-6 mm in diameter, inhomogeneous in color. HFUS depicted a poorly delimited, irregular, hypoechoic lesion crossing the dermoepidermal junction. At the first exam it was not vascularized, but 6 months later a number of vascular flow signals within the lesion were found. In histopathological examination the lesions were finally diagnosed as, respectively: benign cavernous hemangioma and melanoma. In both presented cases HFUS proved to be useful in a differential diagnosis of suspicious skin lesions. Noninvasive and easy to perform, HFUS is a valuable diagnostic method in dermatology.</p

High Frequency Ultrasonography of the Skin and Its Role as an Auxillary Tool in Diagnosis of Benign and Malignant Cutaneous Tumors – A Comparison of Two Clinical Cases

The number of dermatologic entities that can be studied by ultrasound examination (US) of the skin is increasing. Conventional US and high frequency US (HFUS) are considered useful additional tools in improving the diagnosis and management of common benign and malignant skin tumors. US may help in positive and differential diagnosis of primary melanocytic neoplasms and of locoregional spread in melanoma patients. US preoperative evaluation of primary melanoma thickness correlates with histologically estimated melanoma thickness, and can help determine surgical margins and indications for sentinel lymph node biopsy. It is also useful during follow-up after surgical treatment for early detection of recurrence or metastases. In this case report, we present two cases of skin lesions clinically suspicious for malignancy. The first lesion was a round nodule 3 mm in diameter, resembling a blue nevus. In HFUS it was well delimited, hypoechoic, and well vascularized. The second lesion presented as an elevated, well-circumscribed nodule, 5-6 mm in diameter, inhomogeneous in color. HFUS depicted a poorly delimited, irregular, hypoechoic lesion crossing the dermoepidermal junction. At the first exam it was not vascularized, but 6 months later a number of vascular flow signals within the lesion were found. In histopathological examination the lesions were finally diagnosed as, respectively: benign cavernous hemangioma and melanoma. In both presented cases HFUS proved to be useful in a differential diagnosis of suspicious skin lesions. Noninvasive and easy to perform, HFUS is a valuable diagnostic method in dermatology.</p

Review: Nutritional ecology of heavy metals

The aim of this review is to focus the attention on the nutrition ecology of the heavy metals and on the major criticisms related to the heavy metals content in animal feeds, manure, soil and animal-origin products. Heavy metals are metallic elements that have a high density that have progressively accumulated in the food chain with negative effects for human health. Some metals are essential (Fe, I, Co, Zn, Cu, Mn, Mo, Se) to maintain various physiological functions and are usually added as nutritional additives in animal feed. Other metals (As, Cd, F, Pb, Hg) have no established biological functions and are considered as contaminants/undesirable substances. The European Union adopted several measures in order to control their presence in the environment, as a result of human activities such as: farming, industry or food processing and storage contamination. The control of the animal input could be an effective strategy to reduce human health risks related to the consumption of animal-origin products and the environmental pollution by manure. Different management of raw materials and feed, animal species as well as different legal limits can influence the spread of heavy metals. To set up effective strategies against heavy metals the complex interrelationships in rural processes, the widely variability of farming practices, the soil and climatic conditions must be considered. Innovative and sustainable approaches have discussed for the heavy metal nutrition ecology to control the environmental pollution from livestock-related activities

Racial differences in systemic sclerosis disease presentation: a European Scleroderma Trials and Research group study

Objectives. Racial factors play a significant role in SSc. We evaluated differences in SSc presentations between white patients (WP), Asian patients (AP) and black patients (BP) and analysed the effects of geographical locations.Methods. SSc characteristics of patients from the EUSTAR cohort were cross-sectionally compared across racial groups using survival and multiple logistic regression analyses.Results. The study included 9162 WP, 341 AP and 181 BP. AP developed the first non-RP feature faster than WP but slower than BP. AP were less frequently anti-centromere (ACA; odds ratio (OR) = 0.4, P &lt; 0.001) and more frequently anti-topoisomerase-I autoantibodies (ATA) positive (OR = 1.2, P = 0.068), while BP were less likely to be ACA and ATA positive than were WP [OR(ACA) = 0.3, P &lt; 0.001; OR(ATA) = 0.5, P = 0.020]. AP had less often (OR = 0.7, P = 0.06) and BP more often (OR = 2.7, P &lt; 0.001) diffuse skin involvement than had WP.AP and BP were more likely to have pulmonary hypertension [OR(AP) = 2.6, P &lt; 0.001; OR(BP) = 2.7, P = 0.03 vs WP] and a reduced forced vital capacity [OR(AP) = 2.5, P &lt; 0.001; OR(BP) = 2.4, P &lt; 0.004] than were WP. AP more often had an impaired diffusing capacity of the lung than had BP and WP [OR(AP vs BP) = 1.9, P = 0.038; OR(AP vs WP) = 2.4, P &lt; 0.001]. After RP onset, AP and BP had a higher hazard to die than had WP [hazard ratio (HR) (AP) = 1.6, P = 0.011; HR(BP) = 2.1, P &lt; 0.001].Conclusion. Compared with WP, and mostly independent of geographical location, AP have a faster and earlier disease onset with high prevalences of ATA, pulmonary hypertension and forced vital capacity impairment and higher mortality. BP had the fastest disease onset, a high prevalence of diffuse skin involvement and nominally the highest mortality