21 research outputs found
Effects of Reciproc, Mtwo and ProTaper Instruments on Formation of Root Fracture
Introduction: The aim of this study was to compare the formation of dentinal crack and craze lines in the root dentin during root canal preparation with three different NiTi endodontic systems, naming Reciproc (RCP), ProTaper Universal (PTU) and Mtwo. Methods and Materials: One hundred extracted mandibular premolars with single canals were selected and decoronated. The teeth were randomly divided into four groups of 25 each (n=25). In groups 1, 2 and 3 the teeth were prepared using Mtwo, PTU and RCP, respectively. While in group 4 (control group) the samples were left unprepared. After preparation, all specimens were sectioned perpendicular to the long axis of root at 3, 5 and 9-mm distances from the apex. The sections were then individually observed under 12× magnification using stereomicroscope. The data was analyzed using the chi-square and Fisher’s exact tests. The level of significance was set at 0.05. Results: No cracks were observed in the control group. All engine-driven systems caused dentinal cracks. Mtwo and PTU caused cracks significantly more than RCP (P<0.05). There was no significant difference between RCP and control group (P>0.05). Conclusion: All three engine-driven systems created dentinal defects. Reciproc caused less cracks than Mtwo and ProTaper Universal.Keywords: Cracks; Craze Lines; Dentin; Nickel-Titanium Instruments; Root Canal Preparation; Tooth Root; Vertical Root Fractur
Effect of Deep Cryogenic Treatment on Cyclic Fatigue of Endodontic Rotary Nickel Titanium Instruments
Introduction: Cyclic fatigue is the common reason for breakage of rotary instruments. This study was conducted to evaluate the effect of cryogenic treatment (CT) in improving the resistance to cyclic fatigue of endodontic rotary instruments. Methods and Materials: In this in vitro study, 20 RaCe and 20 Mtwo files were randomly divided into two groups of negative control and CT. CT files were stored in liquid nitrogen at -196°C for 24 h, and then were gradually warmed to the room temperature. All files were used (at torques and speeds recommended by their manufacturers) in a simulated canal with a 45° curvature until breakage. The time to fail (TF) was recorded and used to calculate the number of cycle to fail (NCF). Groups were compared using independent-samples t-test. Results: Mean NCFs were 1248.2±68.1, 1281.6±78.6, 4126.0±179.2, and 4175.4±190.1 cycles, for the Mtwo-control, Mtwo-CT, RaCe-control, and RaCe-CT, respectively. The difference between the controls and their respective CT groups were not significant (P>0.3). The difference between the systems was significant. Conclusion: Deep CT did not improve resistance to cyclic fatigue of the evaluated rotary files.Keywords: Cryogenic Treatment; Cyclic Fatigue; Instrument Fracture; Rotary Nickel Titanium File
Comparison of Dentinal Defects Formation in Straight, Moderate and Severely Curved Canals by Three Distinctive Nickel Titanium Instruments: An in vitro Study
Statement of the Problem: It is stated that engine-driven instruments might cause dentinal defects during root canal preparation. These defects might spread and progress into greater fractures or vertical root fracture.
Purpose: This study aimed to compare the incidence of dentinal defects that might arise all through preparation of root canals, using One Shape, RaCe, and WaveOne systems in canals with a curvature (0-20°) and (20-40°).
Materials and Method: In this in vitro study, 150 mandibular first molars were enrolled. Based on the degree of curvature in the mesial roots, the samples were divided into two groups (n=75) of straight and moderately curved canals (0-20º), and severely curved canals (20-40°). Then each group was randomly divided into four sub-groups. In subgroups 1 to 3 from each group, canals were prepared using WaveOne, One Shape, and RaCe. Then all roots were sectioned at 3, 6 and 9-mm distances from the apex. The slices were evaluated using stereomicroscope at 12× magnification. The data were analyzed using the Chi-square and Fisher’s exact tests and the level of significance was set at 0.05.
Results: Fracture and other defects were not found in the control groups. In canals with curvature (0-20°), WaveOne caused the maximum dentinal defects and RaCe produced the least. Moreover, in canals with curvature (20-40°), One Shape caused the maximum dentinal defects while WaveOne and RaCe caused equal dentinal defects approximately.
Conclusion: There was a statistically significant relationship between the performance of RaCe and One Shape in canals with curvature (0-20º) and (20-40º), (p Value 0.05)
Prevalence, causes, and complications of acute kidney transplant rejection: survey in a single center
Backgrounds: Kidney transplantation has become a preferred surgical approach for several renal disorders. To acquire required information in basis of acute transplant rejection and its complications, it is important to determine rejection prevalence and its potential causes.Methods: In present retrospective study, during a 37-year survey, 2250 patients received conventional kidney transplantation. The patients who had suffered graft loss, death, and nephrectomy of transplanted kidney during the first month after transplantation enrolled the study and all required data recorded in designed questionnaire. Results: Of 2557 patients underwent kidney transplantation, 86 (3.36%) patients were suffered acute graft loss during the first month after transplantation, that 43 (50%) were males and 43 (50%) were females. Mean age of the patients with acute graft loss was 40.09±14.09. The most common underlying cause for acute graft loss in our study were as follows: acute rejection of transplanted kidney (34.9%), renal vein thrombosis (17.5%), heart infarction (13.9%), idiopathic (6.9%). Of 86 patients, thirty-three patients underwent nephrectomy subsequent to rejection, however, fifty-three patients well responded to medical treatment. In our study the amount of acute nephrectomy during the first month after transplantation was 38.4% (33 patients) which constituted 1.2% of the total graft losses.Conclusion: Renal vein thrombosis is the most common underlying reason for graft loss in kidney transplantation patients, and 1st week of the transplantation is the most probable postoperative time for graft rejection
Recommended from our members
Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021
BACKGROUND Regular, detailed reporting on population health by underlying cause of death is fundamental for public health decision making. Cause-specific estimates of mortality and the subsequent effects on life expectancy worldwide are valuable metrics to gauge progress in reducing mortality rates. These estimates are particularly important following large-scale mortality spikes, such as the COVID-19 pandemic. When systematically analysed, mortality rates and life expectancy allow comparisons of the consequences of causes of death globally and over time, providing a nuanced understanding of the effect of these causes on global populations. METHODS The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 cause-of-death analysis estimated mortality and years of life lost (YLLs) from 288 causes of death by age-sex-location-year in 204 countries and territories and 811 subnational locations for each year from 1990 until 2021. The analysis used 56 604 data sources, including data from vital registration and verbal autopsy as well as surveys, censuses, surveillance systems, and cancer registries, among others. As with previous GBD rounds, cause-specific death rates for most causes were estimated using the Cause of Death Ensemble model-a modelling tool developed for GBD to assess the out-of-sample predictive validity of different statistical models and covariate permutations and combine those results to produce cause-specific mortality estimates-with alternative strategies adapted to model causes with insufficient data, substantial changes in reporting over the study period, or unusual epidemiology. YLLs were computed as the product of the number of deaths for each cause-age-sex-location-year and the standard life expectancy at each age. As part of the modelling process, uncertainty intervals (UIs) were generated using the 2·5th and 97·5th percentiles from a 1000-draw distribution for each metric. We decomposed life expectancy by cause of death, location, and year to show cause-specific effects on life expectancy from 1990 to 2021. We also used the coefficient of variation and the fraction of population affected by 90% of deaths to highlight concentrations of mortality. Findings are reported in counts and age-standardised rates. Methodological improvements for cause-of-death estimates in GBD 2021 include the expansion of under-5-years age group to include four new age groups, enhanced methods to account for stochastic variation of sparse data, and the inclusion of COVID-19 and other pandemic-related mortality-which includes excess mortality associated with the pandemic, excluding COVID-19, lower respiratory infections, measles, malaria, and pertussis. For this analysis, 199 new country-years of vital registration cause-of-death data, 5 country-years of surveillance data, 21 country-years of verbal autopsy data, and 94 country-years of other data types were added to those used in previous GBD rounds. FINDINGS The leading causes of age-standardised deaths globally were the same in 2019 as they were in 1990; in descending order, these were, ischaemic heart disease, stroke, chronic obstructive pulmonary disease, and lower respiratory infections. In 2021, however, COVID-19 replaced stroke as the second-leading age-standardised cause of death, with 94·0 deaths (95% UI 89·2-100·0) per 100 000 population. The COVID-19 pandemic shifted the rankings of the leading five causes, lowering stroke to the third-leading and chronic obstructive pulmonary disease to the fourth-leading position. In 2021, the highest age-standardised death rates from COVID-19 occurred in sub-Saharan Africa (271·0 deaths [250·1-290·7] per 100 000 population) and Latin America and the Caribbean (195·4 deaths [182·1-211·4] per 100 000 population). The lowest age-standardised death rates from COVID-19 were in the high-income super-region (48·1 deaths [47·4-48·8] per 100 000 population) and southeast Asia, east Asia, and Oceania (23·2 deaths [16·3-37·2] per 100 000 population). Globally, life expectancy steadily improved between 1990 and 2019 for 18 of the 22 investigated causes. Decomposition of global and regional life expectancy showed the positive effect that reductions in deaths from enteric infections, lower respiratory infections, stroke, and neonatal deaths, among others have contributed to improved survival over the study period. However, a net reduction of 1·6 years occurred in global life expectancy between 2019 and 2021, primarily due to increased death rates from COVID-19 and other pandemic-related mortality. Life expectancy was highly variable between super-regions over the study period, with southeast Asia, east Asia, and Oceania gaining 8·3 years (6·7-9·9) overall, while having the smallest reduction in life expectancy due to COVID-19 (0·4 years). The largest reduction in life expectancy due to COVID-19 occurred in Latin America and the Caribbean (3·6 years). Additionally, 53 of the 288 causes of death were highly concentrated in locations with less than 50% of the global population as of 2021, and these causes of death became progressively more concentrated since 1990, when only 44 causes showed this pattern. The concentration phenomenon is discussed heuristically with respect to enteric and lower respiratory infections, malaria, HIV/AIDS, neonatal disorders, tuberculosis, and measles. INTERPRETATION Long-standing gains in life expectancy and reductions in many of the leading causes of death have been disrupted by the COVID-19 pandemic, the adverse effects of which were spread unevenly among populations. Despite the pandemic, there has been continued progress in combatting several notable causes of death, leading to improved global life expectancy over the study period. Each of the seven GBD super-regions showed an overall improvement from 1990 and 2021, obscuring the negative effect in the years of the pandemic. Additionally, our findings regarding regional variation in causes of death driving increases in life expectancy hold clear policy utility. Analyses of shifting mortality trends reveal that several causes, once widespread globally, are now increasingly concentrated geographically. These changes in mortality concentration, alongside further investigation of changing risks, interventions, and relevant policy, present an important opportunity to deepen our understanding of mortality-reduction strategies. Examining patterns in mortality concentration might reveal areas where successful public health interventions have been implemented. Translating these successes to locations where certain causes of death remain entrenched can inform policies that work to improve life expectancy for people everywhere. FUNDING Bill & Melinda Gates Foundation
Immersion of Mtwo nickel-titanium rotary files in antiseptic solution and fatigue resistance: Effects and analysis
Background and aims: Widely application of rotary files for endo treatment would force us to obtain an accurate understanding about the characteristics and drawbacks of these instruments. Therefore in this study, the effects of immersion of NiTi M2 rotary file in deconex and sodium hypochlorite solution on the cyclic fatigue resistance was investigated Material and methods: In this exprimental study, 45 NITI M2 rotary files were divided in three groups I) control (without any immersion), II) immestion in deconex for 5 min and III) immesrion in sodium hypochlorite for 5 min and their cyclic fatigue resistance was investigated by using testing device and NCFs were recorded. The obtained results were analysis by using Fisher's statistic and the mean comparisons were carried out by using Tukey Results: The results showed that immersion of NiTi M2 rotary files in streluating solutions provides negative and significant effects on the cycle fatigue resistance and the highest NCF was obtained in the control (890.046) and the lowest was obtained in the files immmersed in deconex (546,076). Therefore, it is suggested to used autocalve as substitution for immersion to strelize NiTi M2 rotary files. 
In-Vitro Evaluation of the Effect of MTA Setting on Apical Micro-leakage of Open Apex Canals with MTA Apical Plug
Background and Aim: Mineral Trioxide Aggregate (MTA) has a high clinical success rate when used as the apical plug. The conventional method of using MTA as an apical plug is doneduring two treatment sessions. This study aimed to evaluate the possibility of complete filling of root canal with gutta percha and AH26 sealer immediately after the placement of MTA plug .
Materials and Methods : A total of 88 single-rooted teeth were selected for this experimental study. The teeth were prepared and randomly divided into two groups of 40 each. Four teeth were considered as the positive control group and the remaining 4 as the negative controls. In group 1, MTA apical plug was placed, specimens were stored in saline solution for 24h and then filled with gutta percha and AH26 sealer. In the 2nd group, the roots were filled immediately after the placement of MTA. In the positive control group, the root canals were left unfilled and in the negative control group, root canals were filled with gutta percha and sealer. The specimens were then immersed in 1% methylene blue, demineralized in 5% nitric acid and cleared in methyl salicylate. Dye penetration was measured by a stereomicroscope in micrometer. T-test was used for statistical analysis .
Results: The mean dye penetration was 7813 μ m in the first and 9152 μ m in the second group. According to t-test, the 2nd group had significantly greater microleakage than the first group (P<0.05) .
Conclusion: MTA needs to be exposed to moisture for final setting and root canal obturation must be delayed until complete setting of MTA