Results at 24 months from the prospective, randomized, multicenter Investigational Device Exemption trial of ProDisc-C versus anterior cervical discectomy and fusion with 4-year follow-up and continued access patients.

BackgroundCervical total disk replacement (TDR) is intended to address pain and preserve motion between vertebral bodies in patients with symptomatic cervical disk disease. Two-year follow-up for the ProDisc-C (Synthes USA Products, LLC, West Chester, Pennsylvania) TDR clinical trial showed non-inferiority versus anterior cervical discectomy and fusion (ACDF), showing superiority in many clinical outcomes. We present the 4-year interim follow-up results.MethodsPatients were randomized (1:1) to ProDisc-C (PDC-R) or ACDF. Patients were assessed preoperatively, and postoperatively at 6 weeks and 3, 6, 12, 18, 24, 36, and 48 months. After the randomized portion, continued access (CA) patients also underwent ProDisc-C implantation, with follow-up visits up to 24 months. Evaluations included Neck Disability Index (NDI), Visual Analog Scale (VAS) for pain/satisfaction, and radiographic and physical/neurologic examinations.ResultsRandomized patients (103 PDC-R and 106 ACDF) and 136 CA patients were treated at 13 sites. VAS pain and NDI score improvements from baseline were significant for all patients (P < .0001) but did not differ among groups. VAS satisfaction was higher at all time points for PDC-R versus ACDF patients (P = .0499 at 48 months). The percentage of patients who responded yes to surgery again was 85.6% at 24 months and 88.9% at 48 months in the PDC-R group, 80.9% at 24 months and 81.0% at 48 months in the ACDF group, and 86.3% at 24 months in the CA group. Five PDC-R patients (48 months) and no CA patients (24 months) had index-level bridging bone. By 48 months, approximately 4-fold more ACDF patients required secondary surgery (3 of 103 PDC-R patients [2.9%] vs 12 of 106 ACDF patients [11.3%], P = .0292). Of these, 6 ACDF patients (5.6%) required procedures at adjacent levels. Three CA patients required secondary procedures (24 months).ConclusionsOur 4-year data support that ProDisc-C TDR and ACDF are viable surgical options for symptomatic cervical disk disease. Although ACDF patients may be at higher risk for additional surgical intervention, patients in both groups show good clinical results at longer-term follow-up

A New Geographic Locality and Three New Host Records for Neobenedenia melleni (MacCallum) (Monogenea: Capsalidae)

A new geographic locality record and three new host records for Neobenedenia melleni (MacCallum, 1921) (Monogenea: Capsalidae) are provided. Specimens of N. melleni were collected from the skin of three Florida pompano, Trachinotus carolinus (Linnaeus, 1166)(Carangidae),caught in the northern Gulf of Mexico off Horn Island, Mississippi; from the skin of a bluering angelfish, Pomacanthus annularis (Bloch, 1157) (Pomacanthidae), in the Shark Reef Aquarium at Mandalay Bay, Las Vegas, Nevada; from the skin of a rock greenling, Hexagrammos lagocephalus (Pallas, 1810) (Hexagrammidae), in the Alaska SeaLife Center, Seward, Alaska; and from the skin of two blue-barred ribbon gobies, Oxymetopon cyanoctenosum Klausewitz and Condé, 1981 (Microdesmidae), in a tropical fish clearinghouse in Hayward, California. This is the first published record of the parasite from a microdesmid or wild carangid. Prior to this report, no specimen of N. melleni had been reported from a wild-caught fish in the Gulf of Mexico. The presence of N. melleni in the Gulf of Mexico is particularly noteworthy because this monogenean is a known pathogen of cultured fishes in netpens and recirculating seawater systems

Adjusting bone mass for differences in projected bone area and other confounding variables: an allometric perspective.

The traditional method of assessing bone mineral density (BMD; given by bone mineral content [BMC] divided by projected bone area [Ap], BMD = BMC/Ap) has come under strong criticism by various authors. Their criticism being that the projected bone "area" (Ap) will systematically underestimate the skeletal bone "volume" of taller subjects. To reduce the confounding effects of bone size, an alternative ratio has been proposed called bone mineral apparent density [BMAD = BMC/(Ap)3/2]. However, bone size is not the only confounding variable associated with BMC. Others include age, sex, body size, and maturation. To assess the dimensional relationship between BMC and projected bone area, independent of other confounding variables, we proposed and fitted a proportional allometric model to the BMC data of the L2-L4 vertebrae from a previously published study. The projected bone area exponents were greater than unity for both boys (1.43) and girls (1.02), but only the boy's fitted exponent was not different from that predicted by geometric similarity (1.5). Based on these exponents, it is not clear whether bone mass acquisition increases in proportion to the projected bone area (Ap) or an estimate of projected bone volume (Ap)3/2. However, by adopting the proposed methods, the analysis will automatically adjust BMC for differences in projected bone size and other confounding variables for the particular population being studied. Hence, the necessity to speculate as to the theoretical value of the exponent of Ap, although interesting, becomes redundant

Designing an automated clinical decision support system to match clinical practice guidelines for opioid therapy for chronic pain

Abstract Background Opioid prescribing for chronic pain is common and controversial, but recommended clinical practices are followed inconsistently in many clinical settings. Strategies for increasing adherence to clinical practice guideline recommendations are needed to increase effectiveness and reduce negative consequences of opioid prescribing in chronic pain patients. Methods Here we describe the process and outcomes of a project to operationalize the 2003 VA/DOD Clinical Practice Guideline for Opioid Therapy for Chronic Non-Cancer Pain into a computerized decision support system (DSS) to encourage good opioid prescribing practices during primary care visits. We based the DSS on the existing ATHENA-DSS. We used an iterative process of design, testing, and revision of the DSS by a diverse team including guideline authors, medical informatics experts, clinical content experts, and end-users to convert the written clinical practice guideline into a computable algorithm to generate patient-specific recommendations for care based upon existing information in the electronic medical record (EMR), and a set of clinical tools. Results The iterative revision process identified numerous and varied problems with the initially designed system despite diverse expert participation in the design process. The process of operationalizing the guideline identified areas in which the guideline was vague, left decisions to clinical judgment, or required clarification of detail to insure safe clinical implementation. The revisions led to workable solutions to problems, defined the limits of the DSS and its utility in clinical practice, improved integration into clinical workflow, and improved the clarity and accuracy of system recommendations and tools. Conclusions Use of this iterative process led to development of a multifunctional DSS that met the approval of the clinical practice guideline authors, content experts, and clinicians involved in testing. The process and experiences described provide a model for development of other DSSs that translate written guidelines into actionable, real-time clinical recommendations.http://deepblue.lib.umich.edu/bitstream/2027.42/78267/1/1748-5908-5-26.xmlhttp://deepblue.lib.umich.edu/bitstream/2027.42/78267/2/1748-5908-5-26.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/78267/3/1748-5908-5-26-S3.TIFFhttp://deepblue.lib.umich.edu/bitstream/2027.42/78267/4/1748-5908-5-26-S2.TIFFhttp://deepblue.lib.umich.edu/bitstream/2027.42/78267/5/1748-5908-5-26-S1.TIFFPeer Reviewe

Redistribution of Aluminum Ions During Processing of Sialon Ceramics

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65916/1/j.1151-2916.1986.tb04820.x.pd

Culture shapes how we look at faces

Background: Face processing, amongst many basic visual skills, is thought to be invariant across all humans. From as early as 1965, studies of eye movements have consistently revealed a systematic triangular sequence of fixations over the eyes and the mouth, suggesting that faces elicit a universal, biologically-determined information extraction pattern. Methodology/Principal Findings: Here we monitored the eye movements of Western Caucasian and East Asian observers while they learned, recognized, and categorized by race Western Caucasian and East Asian faces. Western Caucasian observers reproduced a scattered triangular pattern of fixations for faces of both races and across tasks. Contrary to intuition, East Asian observers focused more on the central region of the face. Conclusions/Significance: These results demonstrate that face processing can no longer be considered as arising from a universal series of perceptual events. The strategy employed to extract visual information from faces differs across cultures

Adiabatic Output Coupling of a Bose Gas at Finite Temperatures

We develop a general theory of adiabatic output coupling from trapped atomic Bose-Einstein Condensates at finite temperatures. For weak coupling, the output rate from the condensate, and the excited levels in the trap, settles in a time proportional to the inverse of the spectral width of the coupling to the output modes. We discuss the properties of the output atoms in the quasi-steady-state where the population in the trap is not appreciably depleted. We show how the composition of the output beam, containing condensate and thermal component, may be controlled by changing the frequency of the output coupler. This composition determines the first and second order coherence of the output beam. We discuss the changes in the composition of the bose gas left in the trap and show how nonresonant output coupling can stimulate either the evaporation of thermal excitations in the trap or the growth of non-thermal excitations, when pairs of correlated atoms leave the condensate.Comment: 22 pages, 6 Figs. To appear in Physical Review A All the typos from the previous submission have been fixe

Clinical Applications of Electron Microscopy in the Analysis of Collagenous Biomaterials

Scanning and transmission electron microscopy are of clinical value in assessing the interaction between biomaterials and ingrowing tissues. Ultrastructural information allows the clinician and biomaterials specialist to determine events occurring during wound healing and the biocompatibility of prosthetic devices. This paper reviews some of the experimental and clinical studies done in our laboratory on the use of natural and reconstituted collagen as replacements for connective tissues. Consideration is given to collagen flakes used for the treatment of dermal ulcers, a collagen fiber prosthesis used for tendon and ligament replacement, the effects of chemical preservatives on cartilage used for replacement of tissues during plastic surgery and the growth and orientation of nerve cells on reconstituted collagen fibers. Our results show that reconstituted collagen can be prepared into prosthetic devices which encourage cell attachment and orientation thereby facilitating healing of injured tissues. Furthermore chemical preservation of cartilagenous tissues kills chondrocytes resulting in eventual resorption by inflammatory cells