Finite-size scaling for non-linear rheology of fluids confined in a small space

We perform molecular dynamics simulations in order to examine the rheological transition of fluids confined in a small space. By performing finite-size scaling analysis, we demonstrate that this rheological transition results from the competition between the system size and the length scale of cooperative particle motion.Comment: 4pages, 8 figure

Bulk and Interfacial Shear Thinning of Immiscible Polymers

Nonequilibrium molecular dynamics simulations are used to study the shear thinning behavior of immiscible symmetric polymer blends. The phase separated polymers are subjected to a simple shear flow imposed by moving a wall parallel to the fluid-fluid interface. The viscosity begins to shear thin at much lower rates in the bulk than at the interface. The entire shear rate dependence of the interfacial viscosity is consistent with a shorter effective chain length $s^*$ that also describes the width of the interface. This $s^*$ is independent of chain length $N$ and is a function only of the degree of immiscibility of the two polymers. Changes in polymer conformation are studied as a function of position and shear rate.Shear thinning correlates more closely with a decrease in the component of the radius of gyration along the velocity gradient than with elongation along the flow. At the interface, this contraction of chains is independent of $N$ and consistent with the bulk behavior for chains of length $s^*$. The distribution of conformational changes along chains is also studied. Central regions begin to stretch at a shear rate that decreases with increasing $N$, while shear induced changes at the ends of chains are independent of $N$.Comment: 8 pages, 8 figure

Lattice Boltzmann simulations in microfluidics: probing the no-slip boundary condition in hydrophobic, rough, and surface nanobubble laden microchannels

In this contribution we review recent efforts on investigations of the effect of (apparent) boundary slip by utilizing lattice Boltzmann simulations. We demonstrate the applicability of the method to treat fundamental questions in microfluidics by investigating fluid flow in hydrophobic and rough microchannels as well as over surfaces covered by nano- or microscale gas bubbles.Comment: 11 pages, 6 figure

Surface Nano-structured Coating for Improved Performance of Axial Piston Pumps

The work starts from the consideration that most of the power losses in a hydraulic pump is due to frictional losses made by the relative motion between moving parts. This fact is particularly true at low operating velocities, when the hydraulic lift effect must be able to maintain a minimum clearance in meatus to limit the volumetric losses. The potential of structured coatings at nanoscale, with super-hydrophobic and oleophobic characteristics, has never been exploited before in an industrial application. The work studies the potential application of nano-coating on piston slippers surface in a real industrial case. The aim is to develop a new industrial solution to increase the energetic efficiency of hydraulic pump used in earthmoving machines. The proposed solution is investigated using a dedicated test bench, designed to reproduce real working conditions of the pump. The results showa reduction of friction coefficient while changing working pressure and rotation velocity

Resilient Strategies and Sustainability in Agri-Food Supply Chains in the Face of High-Risk Events

[EN] Agri-food supply chains (AFSCs) are very vulnerable to high risks such as pandemics, causing economic and social impacts mainly on the most vulnerable population. Thus, it is a priority to implement resilient strategies that enable AFSCs to resist, respond and adapt to new market challenges. At the same time, implementing resilient strategies impact on the social, economic and environmental dimensions of sustainability. The objective of this paper is twofold: analyze resilient strategies on AFSCs in the literature and identify how these resilient strategies applied in the face of high risks affect the achievement of sustainability dimensions. The analysis of the articles is carried out in three points: consequences faced by agri-food supply chains due to high risks, strategies applicable in AFSCs, and relationship between resilient strategies and the achievement of sustainability dimensions.Authors of this publication acknowledge the contribution of the Project 691249, RUC-APS "Enhancing and implementing Knowledge based ICT solutions within high Risk and Uncertain Conditions for Agriculture Production Systems" (www.ruc-aps.eu), funded by the European Union under their funding scheme H2020-MSCA-RISE-2015.Zavala-Alcívar, A.; Verdecho Sáez, MJ.; Alfaro Saiz, JJ. (2020). Resilient Strategies and Sustainability in Agri-Food Supply Chains in the Face of High-Risk Events. IFIP Advances in Information and Communication Technology. 598:560-570. https://doi.org/10.1007/978-3-030-62412-5_46S560570598Gray, R.: Agriculture, transportation, and the COVID-19 crisis. Can. J. Agric. Econ. 68, 239–243 (2020)Queiroz, M.M., Ivanov, D., Dolgui, A., Fosso Wamba, S.: Impacts of epidemic outbreaks on supply chains: mapping a research agenda amid the COVID-19 pandemic through a structured literature review. Ann. Oper. Res. (2020). https://doi.org/10.1007/s10479-020-03685-7Hobbs, J.: Food supply chains during the COVID-19 pandemic. Can. J. Agric. Econ. 68, 171–176 (2020)Shashi, P., Centobelli, P., Cerchione, R., Ertz, M.: Managing supply chain resilience to pursue business and environmental strategies. Bus. Strateg. Environ. 29(3), 1215–1246 (2019)Ivanov, D.: Predicting the impacts of epidemic outbreaks on global supply chains: a simulation-based analysis on the coronavirus outbreak (COVID-19/SARS-CoV-2) case. Transp. Res. Part E Logist. Transp. Rev. 136, 101922 (2020)Mamani, H., Chick, S.E., Simchi-Levi, D.: A game-theoretic model of international influenza vaccination coordination. Manage. Sci. 59(7), 1650–1670 (2013)Liu, M., Zhang, D.: A dynamic logistics model for medical resources allocation in an epidemic control with demand forecast updating. J. Oper. Res. Soc. 67, 841–852 (2016)Hessel, L.: Pandemic influenza vaccines: meeting the supply, distribution and deployment challenges. Influenza Other Respir. Viruses 3, 165–170 (2009)Orenstein, W., Schaffner, W.: Lessons learned: role of influenza vaccine production, distribution, supply, and demand—what it means for the provider. Am. J. Med. 121, S22–S27 (2008)Büyüktahtakın, I., Des-Bordes, E., Kıbış, E.: A new epidemics–logistics model: Insights into controlling the Ebola virus disease in West Africa. Eur. J. Oper. Res. 26, 1046–1063 (2018)Anparasan, A., Lejeune, M.: Analyzing the response to epidemics: concept of evidence-based Haddon matrix. J. Humanit. Logist. Supply Chain Manag. 7, 266–283 (2017)Anparasan, A.A., Lejeune, M.A.: Data laboratory for supply chain response models during epidemic outbreaks. Ann. Oper. Res. 270, 53–64 (2018). https://doi.org/10.1007/s10479-017-2462-yAnparasan, A., Lejeune, M.: Resource deployment and donation allocation for epidemic outbreaks. Ann. Oper. Res. 283, 9–32 (2019). https://doi.org/10.1007/s10479-016-2392-0Ivanov, D., Dolgui, A.: Viability of intertwined supply networks: extending the supply chain resilience angles towards survivability. A position paper motivated by COVID-19 outbreak. Int. J. Prod. Res. 58, 2904–2915 (2020)Ivanov, D.: Viable supply chain model: integrating agility, resilience and sustainability perspectives—lessons from and thinking beyond the COVID-19 pandemic. Ann. Oper. Res. (2020). https://doi.org/10.1007/s10479-020-03640-6Ekici, A., Keskinocak, P., Swann, J.: Modeling influenza pandemic and planning food distribution. Manuf. Serv. Oper. Manag. 16, 11–27 (2014)Miranda, R., Schaffner, D.: Virus risk in the food supply chain. Curr. Op. Food Sci. 30, 43–48 (2019)Magalhães, A., Rossi, A., Zattar, I., Marques, M., Seleme, R.: Food traceability technologies and foodborne outbreak occurrences. Br. Food J. 121, 3362–3379 (2019)Denyer, D., Tranfield, D.: Producing a systematic review. In: Buchanan, D., Bryman, A. (eds.) The Sage Handbook of Organizational Research Methods, pp. 671–689. SAGE Publications Ltd., London (2009)Christopher, M., Peck, H.: Building the resilient supply chain. Int. J. Logist. Manag. 15, 1–14 (2004)Dolgui, A., Ivanov, D., Sokolov, B.: Ripple effect in the supply chain: an analysis and recent literature. Int. J. Prod. Res. 56, 414–430 (2018)Jüttner, U., Peck, H., Christopher, M.: Supply chain risk management: outlining an agenda for future research. Int. J. Logist. Res. 6, 197–210 (2003)Behzadi, G., O’Sullivan, M., Olsen, T., Zhang, A.: Agribusiness supply chain risk management: a review of quantitative decision models. Omega (United Kingdom) 79, 21–42 (2018)Kleindorfer, P., Saad, G.: Managing disruption risks in supply chains. Pr. Op. Man. 14, 53–68 (2005)Vishnu, C., Sridharan, R., Gunasekaran, A., Ram Kumar, P.: Strategic capabilities for managing risks in supply chains: current state and research futurities. J. Adv. Manag. Res. 17(2), 173–211 (2019)Deaton, B., Deaton, B.: Food security and Canada’s agricultural system challenged by COVID-19. Can. J. Agric. Econ. 68(2), 143–149 (2020)Richards, T., Rickard, B.: COVID-19 impact on fruit and vegetable markets. C. J. Ag. Ec. 68(2), 189–194 (2020)Larue, B.: Labor issues and COVID-19. Can. J. Agric. Econ. Can. d’agroeconomie (2020). https://doi.org/10.1111/cjag.12233Hollnagel, E.: Epilogue: RAG: the resilience analysis grid. In: Hollnagel, E., Paries, J., Woods, D., Wreathall, J. (eds.) Resilience Engineering in Practice: A Guidebook. Ashgate Pr., pp. 275–296 (2011)Ponomarov, S., Holcomb, M.: Understanding the concept of supply chain resilience. Int. J. Logist. Manag. 20, 124–143 (2009)Wu, T., Huang, S., Blackhurst, J., Zhang, X., Wang, S.: Supply chain risk management: an agent-based simulation to study the impact of retail stockouts. IEEE Trans. Eng. Manag. 60, 676–686 (2013)Schmitt, A., Singh, M.: A quantitative analysis of disruption risk in a multi-echelon supply chain. Int. J. Prod. Econ. 139, 22–32 (2012)Vroegindewey, R., Hodbod, J.: Resilience of agricultural value chains in developing country contexts: a framework and assessment approach. Sustainability 10, 916 (2018)Behzadi, G., O’Sullivan, M., Olsen, T., Scrimgeour, F., Zhang, A.: Robust and resilient strategies for managing supply disruptions in an agribusiness supply chain. Int. J. Prod. Econ. 191, 207–220 (2017)Bottani, E., Murino, T., Schiavo, M., Akkerman, R.: Resilient food supply chain design: modelling framework and metaheuristic solution approach. Comput. Ind. Eng. 135, 177–198 (2019)Meuwissen, M., et al.: A framework to assess the resilience of farming systems. Agric. Syst. 176, 102656 (2019)Dutta, P., Shrivastava, H.: The design and planning of an integrated supply chain for perishable products under uncertainties: a case study in milk industry. J. Model. Manag. (2020). https://doi.org/10.1108/JM2-03-2019-0071Aboah, J., Wilson, M., Rich, M., Lyne, M.: Operationalising resilience in tropical agricultural value chains. Supply Chain Manag. 24, 271–300 (2019)Ravulakollu, A., Urciuoli, L., Rukanova, B., Tan, Y., Hakvoort, R.: Risk based framework for assessing resilience in a complex multi-actor supply chain domain. Supply Chain Forum 19, 266–281 (2018)Das, K.: Integrating lean, green, and resilience criteria in designing a sustainable food supply chain. Proc. Int. Conf. Ind. Eng. Oper. Manag. 2018, 462–473 (2018)Zhu, Q., Krikke, H.: Managing a sustainable and resilient perishable food supply chain (PFSC) after an outbreak. Sustainability 12, 5004 (2020)Rozhkov, M., Ivanov, D.: Contingency production-inventory control policy for capacity disruptions in the retail supply chain with perishable products. IFAC-PapersOnLine 51, 1448–1452 (2018)Yavari, M., Zaker, H.: Designing a resilient-green closed loop supply chain network for perishable products by considering disruption in both supply chain and power networks. Comput. Chem. Eng. 134, 106680 (2020)Ye, F., Hou, G., Li, Y., Fu, S.: Managing bioethanol supply chain resiliency: a risk-sharing model to mitigate yield uncertainty risk. Ind. Manag. Data Syst. 118, 1510–1527 (2018)Jabbarzadeh, A., Fahimnia, B., Sheu, J., Moghadam, H.: Designing a supply chain resilient to major disruptions and supply/demand interruptions. Transp. Res. Part B Methodol. 94, 121–149 (2016)O’Leary, D.: Evolving information systems and technology research issues for COVID-19 and other pandemics. J. Organ. Comput. Electron. Commer. 30, 1–8 (2020)Zavala-Alcívar, A., Verdecho, M.-J., Alfaro-Saiz, J.-J.: A conceptual framework to manage resilience and increase sustainability in the supply chain. Sustainability 12(16), 6300 (2020)Fahimni, B., Jabbarzadeh, A.: Marrying supply chain sustainability and resilience: a match made in heaven. Transp. Res. Part E Logist. Transp. Rev. 91, 306–324 (2016)Verdecho, M.-J., Alarcón-Valero, F., Pérez-Perales, D., Alfaro-Saiz, J.-J., Rodríguez-Rodríguez, R.: A methodology to select suppliers to increase sustainability within supply chains. CEJOR (2020). https://doi.org/10.1007/s10100-019-00668-3Bai, C., Sarkis, J.: Integrating sustainability into supplier selection with grey system and rough set methodologies. Int. J. Prod. Econ. 124(1), 252–264 (2010)Bai, C., Sarkis, J.: Green supplier development: analytical evaluation using rough set theory. J. Clean. Prod. 18, 1200–1210 (2010)Valipour, S., Safaei, A., Fallah, H.: Resilient supplier selection and segmentation in grey environment. J. Clean. Prod. 207, 1123–1137 (2019)Zimmer, K., Fröhling, M., Schultmann, F.: Sustainable supplier management – a review of models supporting sustainable supplier selection, monitoring and development. Int. J. Prod. Res. 54, 1412–1442 (2016)Yang, S., Xiao, Y., Kuo, Y.: The supply chain design for perishable food with stochastic demand. Sustainability 9, 1195 (2017)Zahiri, B., Zhuang, J., Mohammadi, M.: Toward an integrated sustainable-resilient supply chain: a pharmaceutical case study. Transp. Res. Part E Logist. Transp. Rev. 103, 109–142 (2017)Duong, L., Chong, J.: Supply chain collaboration in the presence of disruptions: a literature review. Int. J. Prod. Res. 58, 3488–3507 (2020

Compensating control participants when the intervention is of significant value: experience in Guatemala, India, Peru and Rwanda

The Household Air Pollution Intervention Network (HAPIN) trial is a randomised controlled trial in Guatemala, India, Peru and Rwanda to assess the health impact of a clean cooking intervention in households using solid biomass for cooking. The HAPIN intervention—a liquefied petroleum gas (LPG) stove and 18-month supply of LPG—has significant value in these communities, irrespective of potential health benefits. For control households, it was necessary to develop a compensation strategy that would be comparable across four settings and would address concerns about differential loss to follow-up, fairness and potential effects on household economics. Each site developed slightly different, contextually appropriate compensation packages by combining a set of uniform principles with local community input. In Guatemala, control compensation consists of coupons equivalent to the LPG stove’s value that can be redeemed for the participant’s choice of household items, which could include an LPG stove. In Peru, control households receive several small items during the trial, plus the intervention stove and 1 month of fuel at the trial’s conclusion. Rwandan participants are given small items during the trial and a choice of a solar kit, LPG stove and four fuel refills, or cash equivalent at the end. India is the only setting in which control participants receive the intervention (LPG stove and 18 months of fuel) at the trial’s end while also being compensated for their time during the trial, in accordance with local ethics committee requirements. The approaches presented here could inform compensation strategy development in future multi-country trials

Dynamic temporary blood facility location-allocation during and post-disaster periods

The key objective of this study is to develop a tool (hybridization or integration of different techniques) for locating the temporary blood banks during and post-disaster conditions that could serve the hospitals with minimum response time. We have used temporary blood centers, which must be located in such a way that it is able to serve the demand of hospitals in nearby region within a shorter duration. We are locating the temporary blood centres for which we are minimizing the maximum distance with hospitals. We have used Tabu search heuristic method to calculate the optimal number of temporary blood centres considering cost components. In addition, we employ Bayesian belief network to prioritize the factors for locating the temporary blood facilities. Workability of our model and methodology is illustrated using a case study including blood centres and hospitals surrounding Jamshedpur city. Our results shows that at-least 6 temporary blood facilities are required to satisfy the demand of blood during and post-disaster periods in Jamshedpur. The results also show that that past disaster conditions, response time and convenience for access are the most important factors for locating the temporary blood facilities during and post-disaster periods

Construction of large-volume tissue mimics with 3D functional vascular networks

We used indirect stereolithography (SL) to form inner-layered fluidic networks in a porous scaffold by introducing a hydrogel barrier on the luminal surface, then seeded the networks separately with human umbilical vein endothelial cells and human lung fibroblasts to form a tissue mimic containing vascular networks. The artificial vascular networks provided channels for oxygen transport, thus reducing the hypoxic volume and preventing cell death. The endothelium of the vascular networks significantly retarded the occlusion of channels during whole-blood circulation. The tissue mimics have the potential to be used as an in vitro platform to examine the physiologic and pathologic phenomena through vascular architecture.ope

Elongation, proliferation & migration differentiate endothelial cell phenotypes and determine capillary sprouting

<p>Abstract</p> <p>Background</p> <p>Angiogenesis, the growth of capillaries from preexisting blood vessels, has been extensively studied experimentally over the past thirty years. Molecular insights from these studies have lead to therapies for cancer, macular degeneration and ischemia. In parallel, mathematical models of angiogenesis have helped characterize a broader view of capillary network formation and have suggested new directions for experimental pursuit. We developed a computational model that bridges the gap between these two perspectives, and addresses a remaining question in angiogenic sprouting: how do the processes of endothelial cell elongation, migration and proliferation contribute to vessel formation?</p> <p>Results</p> <p>We present a multiscale systems model that closely simulates the mechanisms underlying sprouting at the onset of angiogenesis. Designed by agent-based programming, the model uses logical rules to guide the behavior of individual endothelial cells and segments of cells. The activation, proliferation, and movement of these cells lead to capillary growth in three dimensions. By this means, a novel capillary network emerges out of combinatorially complex interactions of single cells. Rules and parameter ranges are based on literature data on endothelial cell behavior in vitro. The model is designed generally, and will subsequently be applied to represent species-specific, tissue-specific in vitro and in vivo conditions.</p> <p>Initial results predict tip cell activation, stalk cell development and sprout formation as a function of local vascular endothelial growth factor concentrations and the Delta-like 4 Notch ligand, as it might occur in a three-dimensional in vitro setting. Results demonstrate the differential effects of ligand concentrations, cell movement and proliferation on sprouting and directional persistence.</p> <p>Conclusion</p> <p>This systems biology model offers a paradigm closely related to biological phenomena and highlights previously unexplored interactions of cell elongation, migration and proliferation as a function of ligand concentration, giving insight into key cellular mechanisms driving angiogenesis.</p