The investigation of fibre reinforcement effects in thermoplastic materials: interfacial bond strength and fibre end parameter

Glass fibres used in the manufacture of fibre reinforced thermoplastic composites (FRTP) are normally sized with a film former which includes a silane coupling agent to improve the interfacial bond strength between glass fibre and matrix . However, during composite failure even an optimized interface cannot stop the initia tion of cracks at the fibre ends, which can lead to large transverse cracks in the matrix or failure by fibre pull-out. In order to help better understand the failure mechanisms of FRTP, thermoplastic microbond tests and photoelasticity experiments have been used to study the interface in model single fibre composites

Geosynthetic landfill cap stability: comparison of limit equilibrium, computational limit analysis and finite-element analyses

The stability of the veneer cover soil (landfill cap) is an important issue in landfill design. Incorrect design of the landfill cap can lead to failure, which may result in the veneer cover soil sliding on an underlying geosynthetic layer, or in tension failure of the geosynthetic itself. Previous limit equilibrium (LE) analyses of veneer cover layer stability presented in the literature have generally considered whole-slope failure. In this paper, modified LE equations are proposed that (a) encompass more critical cases of localised slope failure for specific cases, and (b) are calibrated against two other methods: 2-D computational limit analysis (CLA) using LimitState:GEO and 2-D elasto-plastic finite-element (FE) analysis using PLAXIS. The scenarios examined encompass a cover of uniform thickness, a buttressed cover, a cover of tapered thickness, the effects of seepage forces, and the effects of construction equipment. It is shown that the LE method provides a reasonable estimate of veneer cover layer stability for most cases examined, although it is in general non-conservative, relative to the CLA and FE analyses. Local failure was found to be critical in the case of the construction equipment, buttress and horizontal seepage scenarios. In the latter case the LE equations previously presented in the literature significantly overestimate stability compared with the LE, CLA and FE analyses considered in this paper

An Inquiry into the Practice of Proving in Low-Dimensional Topology

The aim of this article is to investigate specific aspects connected with visualization in the practice of a mathematical subfield: low-dimensional topology. Through a case study, it will be established that visualization can play an epistemic role. The background assumption is that the consideration of the actual practice of mathematics is relevant to address epistemological issues. It will be shown that in low-dimensional topology, justifications can be based on sequences of pictures. Three theses will be defended. First, the representations used in the practice are an integral part of the mathematical reasoning. As a matter of fact, they convey in a material form the relevant transitions and thus allow experts to draw inferential connections. Second, in low-dimensional topology experts exploit a particular type of manipulative imagination which is connected to intuition of two- and three-dimensional space and motor agency. This imagination allows recognizing the transformations which connect different pictures in an argument. Third, the epistemic—and inferential—actions performed are permissible only within a specific practice: this form of reasoning is subject-matter dependent. Local criteria of validity are established to assure the soundness of representationally heterogeneous arguments in low-dimensional topology

Developmental contexts and features of elite academy football players: Coach and player perspectives

Player profiling can reap many benefits; through reflective coach-athlete dialogue that produces a profile the athlete has a raised awareness of their own development, while the coach has an opportunity to understand the athlete's viewpoint. In this study, we explored how coaches and players perceived the development features of an elite academy footballer and the contexts in which these features are revealed, in order to develop a player profile to be used for mentoring players. Using a Delphi polling technique, coaches and players experienced a number of 'rounds' of expressing their opinions regarding player development contexts and features, ultimately reduced into a consensus. Players and coaches had differing priorities on the key contexts of player development. These contexts, when they reflect the consensus between players and coaches were heavily dominated by ability within the game and training. Personal, social, school, and lifestyle contexts featured less prominently. Although 'discipline' was frequently mentioned as an important player development feature, coaches and players disagreed on the importance of 'training'

An Empirical Study of User Navigation during Document Triage

Περιέχει το πλήρες κείμενοDocument triage is the moment in the information seeking process when the user first decides the relevance of a document to their information need[17]. This paper reports a study of user behaviour during document triage. The study reveals two main findings: first, that there is a small set of common navigational patterns; second, that certain document features strongly influence users’ navigation

A log analysis study of 10 years of ebook consumption in academic library collections

Even though libraries have been offering eBooks for more than a decade, very little is known about eBook access and consumption in academic library collections. This paper addresses this gap with a log analysis study of eBook access at the library of the University of Waikato. This in-depth analysis covers a period spanning 10 years of eBook use at this university. We draw conclusions about the use of eBooks at this institution and compare the results with other published studies of eBook usage at tertiary institutes

Estimating the feasibility of transition paths in extended finite state machines

There has been significant interest in automating testing on the basis of an extended finite state machine (EFSM) model of the required behaviour of the implementation under test (IUT). Many test criteria require that certain parts of the EFSM are executed. For example, we may want to execute every transition of the EFSM. In order to find a test suite (set of input sequences) that achieves this we might first derive a set of paths through the EFSM that satisfy the criterion using, for example, algorithms from graph theory. We then attempt to produce input sequences that trigger these paths. Unfortunately, however, the EFSM might have infeasible paths and the problem of determining whether a path is feasible is generally undecidable. This paper describes an approach in which a fitness function is used to estimate how easy it is to find an input sequence to trigger a given path through an EFSM. Such a fitness function could be used in a search-based approach in which we search for a path with good fitness that achieves a test objective, such as executing a particular transition, and then search for an input sequence that triggers the path. If this second search fails then we search for another path with good fitness and repeat the process. We give a computationally inexpensive approach (fitness function) that estimates the feasibility of a path. In order to evaluate this fitness function we compared the fitness of a path with the ease with which an input sequence can be produced using search to trigger the path and we used random sampling in order to estimate this. The empirical evidence suggests that a reasonably good correlation (0.72 and 0.62) exists between the fitness of a path, produced using the proposed fitness function, and an estimate of the ease with which we can randomly generate an input sequence to trigger the path

Managing to lead in private enterprise in China: Work values, demography and the development of trust

Previous work on trust has focused on employee trust in management. However, issues of how leaders develop trust in their followers in leader-member exchange (LMX) are under-explored. Based on theories of leader-member exchange, attribution and industrial convergence, this study investigates how the work values of leaders influence the development of their trust in followers and how this is moderated by demographic factors. A survey of 219 leaders was conducted in privately owned enterprises in China. The findings suggest that the work value of centralization is negatively related to leader trust in follower predictability. Group orientation and formalization are positively related to the development of trust in follower good faith. Moreover, age and level of formal education are found to moderate significantly the relationships between leader work values and development of their trust in followers within the context of China. Copyright © 2007 SAGE Publications

Geometry and material effects in Casimir physics - Scattering theory

We give a comprehensive presentation of methods for calculating the Casimir force to arbitrary accuracy, for any number of objects, arbitrary shapes, susceptibility functions, and separations. The technique is applicable to objects immersed in media other than vacuum, to nonzero temperatures, and to spatial arrangements in which one object is enclosed in another. Our method combines each object's classical electromagnetic scattering amplitude with universal translation matrices, which convert between the bases used to calculate scattering for each object, but are otherwise independent of the details of the individual objects. This approach, which combines methods of statistical physics and scattering theory, is well suited to analyze many diverse phenomena. We illustrate its power and versatility by a number of examples, which show how the interplay of geometry and material properties helps to understand and control Casimir forces. We also examine whether electrodynamic Casimir forces can lead to stable levitation. Neglecting permeabilities, we prove that any equilibrium position of objects subject to such forces is unstable if the permittivities of all objects are higher or lower than that of the enveloping medium; the former being the generic case for ordinary materials in vacuum.Comment: 44 pages, 11 figures, to appear in upcoming Lecture Notes in Physics volume in Casimir physic