Adaptive mutation using statistics mechanism for genetic algorithms

Copyright @ 2004 Springer-Verla

Herschel/SPIRE observations of the dusty disk of NGC 4244

We present Herschel/SPIRE images at 250, 350, and 500 mu m of NGC 4244, a typical low-mass, disk-only and edge-on spiral galaxy. The dust disk is clumpy and shows signs of truncation at the break radius of the stellar disk. This disk coincides with the densest part of the Hi disk. We compare the spectral energy distribution (SED), including the new SPIRE fluxes, to 3D radiative transfer models; a smooth model disk and a clumpy model with embedded heating. Each model requires a very high value for the dust scale-length (h(d) = 2-5 h(*)), higher dust masses than previous models of NGC 4244 (M-d = 0.47-1.39 x 10(7) M-circle dot) and a face-on optical depth of tau(f.o.)(V) = 0.4-1.12, in agreement with previous disk opacity studies. The vertical scales of stars and dust are similar. The clumpy model much better mimics the general morphology in the sub-mm images and the general SED. The inferred gas-to-dust mass ratio is compatible with those of similar low-mass disks. The relatively large radial scale-length of the dust disk points to radial mixing of the dusty ISM within the stellar disk. The large vertical dust scale and the clumpy dust distribution of our SED model are both consistent with a scenario in which the vertical structure of the ISM is dictated by the balance of turbulence and self-gravity

Impact of agglomeration state of nano- and submicron sized gold particles on pulmonary inflammation

BACKGROUND: Nanoparticle (NP) toxicity testing comes with many challenges. Characterization of the test substance is of crucial importance and in the case of NPs, agglomeration/aggregation state in physiological media needs to be considered. In this study, we have addressed the effect of agglomerated versus single particle suspensions of nano- and submicron sized gold on the inflammatory response in the lung. Rats were exposed to a single dose of 1.6 mg/kg body weight (bw) of spherical gold particles with geometric diameters of 50 nm or 250 nm diluted either by ultrapure water or by adding phosphate buffered saline (PBS). A single dose of 1.6 mg/kg bw DQ12 quartz was used as a positive control for pulmonary inflammation. Extensive characterization of the particle suspensions has been performed by determining the zetapotential, pH, gold concentration and particle size distribution. Primary particle size and particle purity has been verified using transmission electron microscopy (TEM) techniques. Pulmonary inflammation (total cell number, differential cell count and pro-inflammatory cytokines), cell damage (total protein and albumin) and cytotoxicity (alkaline phosphatase and lactate dehydrogenase) were determined in bronchoalveolar lavage fluid (BALF) and acute systemic effects in blood (total cell number, differential cell counts, fibrinogen and C-reactive protein) 3 and 24 hours post exposure. Uptake of gold particles in alveolar macrophages has been determined by TEM. RESULTS: Particles diluted in ultrapure water are well dispersed, while agglomerates are formed when diluting in PBS. The particle size of the 50 nm particles was confirmed, while the 250 nm particles appear to be 200 nm using tracking analysis and 210 nm using TEM. No major differences in pulmonary and systemic toxicity markers were observed after instillation of agglomerated versus single gold particles of different sizes. Both agglomerated as well as single nanoparticles were taken up by macrophages. CONCLUSION: Primary particle size, gold concentration and particle purity are important features to check, since these characteristics may deviate from the manufacturer's description. Suspensions of well dispersed 50 nm and 250 nm particles as well as their agglomerates produced very mild pulmonary inflammation at the same mass based dose. We conclude that single 50 nm gold particles do not pose a greater acute hazard than their agglomerates or slightly larger gold particles when using pulmonary inflammation as a marker for toxicity

The Dynamics of the Pulmonary Microbiome During Mechanical Ventilation in the Intensive Care Unit and the Association with Occurrence of Pneumonia

RATIONALE: Ventilator-associated pneumonia (VAP) is the most common nosocomial infections in patients admitted to the ICU. The adapted island model predicts several changes in the respiratory microbiome during intubation and mechanical ventilation. OBJECTIVES: We hypothesised that mechanical ventilation and antibiotic administration decrease the diversity of the respiratory microbiome and that these changes are more profound in patients who develop VAP. METHODS: Intubated and mechanically ventilated ICU-patients were included. Tracheal aspirates were obtained three times a week. 16S rRNA gene sequencing with the Roche 454 platform was used to measure the composition of the respiratory microbiome. Associations were tested with linear mixed model analysis and principal coordinate analysis. MEASUREMENTS AND MAIN RESULTS: 111 tracheal aspirates were obtained from 35 patients; 11 had VAP, 18 did not have VAP. Six additional patients developed pneumonia within the first 48 hours after intubation. Duration of mechanical ventilation was associated with a decrease in α diversity (Shannon index; fixed-effect regression coefficient (β): -0.03 (95% CI -0.05 to -0.005)), but the administration of antibiotic therapy was not (fixed-effect β: 0.06; 95% CI -0.17 to 0.30). There was a significant difference in change of β diversity between patients who developed VAP and control patients for Bray-Curtis distances (p=0.03) and for Manhattan distances (p=0.04). Burkholderia, Bacillales and, to a lesser extent, Pseudomonadales positively correlated with the change in β diversity. CONCLUSION: Mechanical ventilation, but not antibiotic administration, was associated with changes in the respiratory microbiome. Dysbiosis of microbial communities in the respiratory tract was most profound in patients who developed VAP.info:eu-repo/semantics/publishedVersio

The Architectural Design Rules of Solar Systems based on the New Perspective

On the basis of the Lunar Laser Ranging Data released by NASA on the Silver Jubilee Celebration of Man Landing on Moon on 21st July 1969-1994, theoretical formulation of Earth-Moon tidal interaction was carried out and Planetary Satellite Dynamics was established. It was found that this mathematical analysis could as well be applied to Star and Planets system and since every star could potentially contain an extra-solar system, hence we have a large ensemble of exoplanets to test our new perspective on the birth and evolution of solar systems. Till date 403 exoplanets have been discovered in 390 extra-solar systems. I have taken 12 single planet systems, 4 Brown Dwarf - Star systems and 2 Brown Dwarf pairs. Following architectural design rules are corroborated through this study of exoplanets. All planets are born at inner Clarke Orbit what we refer to as inner geo-synchronous orbit in case of Earth-Moon System. By any perturbative force such as cosmic particles or radiation pressure, the planet gets tipped long of aG1 or short of aG1. Here aG1 is inner Clarke Orbit. The exoplanet can either be launched on death spiral as CLOSE HOT JUPITERS or can be launched on an expanding spiral path as the planets in our Solar System are. It was also found that if the exo-planet are significant fraction of the host star then those exo-planets rapidly migrate from aG1 to aG2 and have very short Time Constant of Evolution as Brown Dwarfs have. This vindicates our basic premise that planets are always born at inner Clarke Orbit. This study vindicates the design rules which had been postulated at 35th COSPAR Scientific Assembly in 2004 at Paris, France, under the title ,New Perspective on the Birth & Evolution of Solar Systems.Comment: This paper has been reported to Earth,Moon and Planets Journal as MOON-S-09-0007

Modelling production-consumption flows of goods in Europe: the trade model within Transtools3

The paper presents a new model for trade flows in Europe that is integrated with a logistics model for transport chain choice through Logsum variables. Logsums measures accessibility across an entire multi-modal logistical chain, and are calculated from a logistics model that has been estimated on disaggregated micro data and then used as an input variable in the trade model. Using Logsums in a trade model is new in applied large-scale freight models, where previous models have simply relied on the distance (e.g. crow-fly) between zones. This linkage of accessibility to the trade model makes it possible to evaluate how changes in policies on transport costs and changes in multi-modal networks will influence trade patterns. As an example the paper presents outcomes for a European-wide truck tolling scenario, which showcases to which extent trade is influenced by such a policy. The paper discusses how such a complex model can be estimated and considers the choice of mathematical formulation and the link between the trade model and logistics model. In the outcomes for the tolling scenario we decompose the total effects into effects from the trade model and effects from the logistics model

What makes a problem hard for a genetic algorithm? Some anomalous results and their explanation

What makes a problem easy or hard for a genetic algorithm (GA)? This question has become increasingly important as people have tried to apply the GA to ever more diverse types of problems. Much previous work on this question has studied the relationship between GA performance and the structure of a given fitness function when it is expressed as a Walsh polynomial . The work of Bethke, Goldberg, and others has produced certain theoretical results about this relationship. In this article we review these theoretical results, and then discuss a number of seemingly anomalous experimental results reported by Tanese concerning the performance of the GA on a subclass of Walsh polynomials, some members of which were expected to be easy for the GA to optimize. Tanese found that the GA was poor at optimizing all functions in this subclass, that a partitioning of a single large population into a number of smaller independent populations seemed to improve performance, and that hillelimbing outperformed both the original and partitioned forms of the GA on these functions. These results seemed to contradict several commonly held expectations about GAs.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/46892/1/10994_2004_Article_BF00993046.pd

Patients with diffuse idiopathic skeletal hyperostosis have an increased burden of thoracic aortic calcifications

OBJECTIVES: DISH has been associated with increased coronary artery calcifications and incident ischaemic stroke. The formation of bone along the spine may share pathways with calcium deposition in the aorta. We hypothesized that patients with DISH have increased vascular calcifications. Therefore we aimed to investigate the presence and extent of DISH in relation to thoracic aortic calcification (TAC) severity. METHODS: This cross-sectional study included 4703 patients from the Second Manifestation of ARTerial disease cohort, consisting of patients with cardiovascular events or risk factors for cardiovascular disease. Chest radiographs were scored for DISH using the Resnick criteria. Different severities of TAC were scored arbitrarily from no TAC to mild, moderate or severe TAC. Using multivariate logistic regression, the associations between DISH and TAC were analysed with adjustments for age, sex, BMI, diabetes, smoking status, non-high-density lipoprotein cholesterol, cholesterol lowering drug usage, renal function and blood pressure. RESULTS: A total of 442 patients (9.4%) had evidence of DISH and 1789 (38%) patients had TAC. The prevalence of DISH increased from 6.6% in the no TAC group to 10.8% in the mild, 14.3% in the moderate and 17.1% in the severe TAC group. After adjustments, DISH was significantly associated with the presence of TAC [odds ratio (OR) 1.46 [95% CI 1.17, 1.82)]. In multinomial analyses, DISH was associated with moderate TAC [OR 1.43 (95% CI 1.06, 1.93)] and severe TAC [OR 1.67 (95% CI 1.19, 2.36)]. CONCLUSIONS: Subjects with DISH have increased TACs, providing further evidence that patients with DISH have an increased burden of vascular calcifications

Quantitative study of hydration of C3S and C2S by thermal analysis. Evolution and composition of C-S-H gels formed

This research is part of a European project (namely, CODICE project), main objective of which is modelling, at a multi-scale, the evolution of the mechanical performance of non-degraded and degraded cementitious matrices. For that, a series of experiments were planned with pure synthetic tri-calcium silicate (C3S) and bi-calcium silicate (C2S) (main components of the Portland cement clinker) to obtain different calcium–silicate–hydrate (C–S–H) gel structures during their hydration. The characterization of those C–S–H gels and matrices will provide experimental parameters for the validation of the multi-scale modelling scheme proposed. In this article, a quantitative method, based on thermal analyses, has been used for the determination of the chemical composition of the C–S–H gel together with the degree of hydration and quantitative evolution of all the components of the pastes. Besides, the microstructure and type of silicate tetrahedron and mean chain length (MCL) were studied by scanning electron microscopy (SEM) and 29Si magic-angle-spinning (MAS) NMR, respectively. The main results showed that the chemical compositions for the C–S–H gels have a CaO/SiO2 M ratio almost constant of 1.7 for both C3S and C2S compounds. Small differences were found in the gel water content: the H2O/SiO2 M ratio ranged from 2.9 ± 0.2 to 2.6 ± 0.2 for the C3S (decrease) and from 2.4 ± 0.2 to 3.2 ± 0.2 for the C2S (increase). The MCL values of the C–S–H gels, determined from 29Si MAS NMR, were 3.5 and 4 silicate tetrahedron, for the hydrated C3S and C2S, respectively, remaining almost constant at all hydration periods