2,391 research outputs found

    Development of a method to identify foot strike on an arena surface: application to jump landing

    Get PDF
    Foot strike can be difficult to determine using kinematics alone, particularly when studying equine activities on more compliant surfaces, so this study was done with the aim of developing and validating a method to determine foot strike on an arena surface that can be used in conjunction with kinematics alone, and of applying the method in the context of measuring foot strike during jump landing on an arena surface. A low-cost contact mat was developed. The timing of the contact mat switching ‘on’ was compared to the timing of a force platform onset of 20 N, load and loading rate at foot strike. Two groups of 25 participants were used in two separate studies to validate the contact mat: the first measured the difference in timing with respect to two different activities (running and stepping down from a box), and the second measured the difference in timing with respect to 1- and 2-cm depths of an arena surface during running. In a third study, the mat was used to measure leading limb foot strike of six horses during jump landing, and these data were compared to kinematics from a palmar marker on the hoof wall. All data were recorded at 500 Hz. A consistent difference in delay was found between the mat and force platform onset, and as a result, no significant differences (P>0.05) in timing delay between different loading rates or depths were found. During jump landing, foot strike (determined from the mat) occurred after the vertical velocity minima and the acceleration maxima for the hoof marker, but it occurred before the point where the rate of vertical displacement began to reduce. In conclusion, further work is needed to enhance these techniques, but these preliminary results indicate that this method may be effective in determining foot strike for field-based applications

    Plant sterols, marine-derived omega-3 fatty acids and other functional ingredients: a new frontier for treating hyperlipidemia

    Get PDF
    As hyperlipidemia, including hypercholesterolemia (HC) and hypertriglyceridemia (HTN), continue to challenge North America's healthcare systems, patients continue to seek efficacious and safe natural therapies that complement pharmaceutical interventions. However, despite the ever-growing body of research supporting the use of functional foods and nutraceuticals (FFN) for the prevention and treatment of hyperlipidemia, reception amongst the medical community regarding the implementation of FFN into clinical guidelines continues to lag. Research demonstrates that specific FFN target and modulate molecular processes that perpetuate hyperlipidemia. In addition, studies consistently demonstrate that combining certain FFN such as marine-derived omega-3 fatty acids or plant sterols/stanols with statins enhances triglyceride and cholesterol-lowering efficacy, respectively. Thus, the purpose of this commentary is to contend that efficacious FFN not only reduce HC and HTG but also boost the lipid-lowering effects of pharmaceutical hypolipidemic medications. Finally, this editorial aims to challenge current medical guidelines to emphasize efficacious FFN during all stages of treatment of hyperlipidemias as adjuncts to pharmacotherapy

    Super-resolution electron ptychography of low dimensional materials at 30 keV: beyond the detector limit

    Get PDF
    We demonstrate that electron ptychographic phase reconstruction can recover spatial frequencies higher than those directly recorded in the experimental electron diffraction patterns. This ability to recover high angle information from the oversampled low angle information allows an annular detector to be inserted which partially shadows a lower pixelated detector to simultaneously record a conventional annular dark field image and a ptychographic dataset. We apply this approach to 30 keV imaging of monolayer molybdenum disulfide and achieve an Abbe limited resolution of 1.2 ± 0.1Å in our reconstructions

    High fidelity estimates of paratransit energy consumption from per-second GPS tracking data

    Get PDF
    Paratransit, in particular the minibus taxi, is the mainstay of public transport in sub-Saharan Africa. These vehicles are often second-hand, ageing, fuel inefficient, and expensive to operate - issues that electrification can ameliorate. However, modeling and planning large-scale transitions to electric paratransit require reliable estimates of vehicle energy consumption. This paper provides such estimates by applying a vehicle kinetic model to per-second GPS data gathered on minibus taxis. Data include 62 trips across three routes with different driving conditions near Stellenbosch, South Africa. We find a range of energy consumption from 0.29 to 0.51 kWh/km (mean = 0.39 kWh/km). Past estimates in literature relied on per-minute GPS data, which we show leads to inaccurate energy consumption estimates. We recommend new kWh/km values for modeling vehicle operations and grid impact, and discuss how future work can utilize our analysis to advance the transition to electric paratransit sub-Saharan Africa

    A direct image of the obscuring disk surrounding an active galactic nucleus

    Get PDF
    Active galactic nuclei (AGN) are generally accepted to be powered by the release of gravitational energy in a compact accretion disk surrounding a massive black hole. Such disks are also necessary to collimate powerful radio jets seen in some AGN. The unifying classification schemes for AGN further propose that differences in their appearance can be attributed to the opacity of the accreting material, which may obstruct our view of the central region of some systems. The popular model for the obscuring medium is a parsec-scale disk of dense molecular gas, although evidence for such disks has been mostly indirect, as their angular size is much smaller than the resolution of conventional telescopes. Here we report the first direct images of a pc-scale disk of ionised gas within the nucleus of NGC 1068, the archetype of obscured AGN. The disk is viewed nearly edge-on, and individual clouds within the ionised disk are opaque to high-energy radiation, consistent with the unifying classification scheme. In projection, the disk and AGN axes align, from which we infer that the ionised gas disk traces the outer regions of the long-sought inner accretion disk.Comment: 14 pages, LaTeX, PSfig, to appear in Nature. also available at http://hethp.mpe-garching.mpg.de/Preprint

    Estimating Regional Spatial and Temporal Variability of PM2.5 Concentrations Using Satellite Data, Meteorology, and Land Use Information

    Get PDF
    Background: Studies of chronic health effects due to exposures to particulate matter with aerodynamic diameters ≤ 2.5 μm (PM2.5) are often limited by sparse measurements. Satellite aerosol remote sensing data may be used to extend PM2.5 ground networks to cover a much larger area. Objectives: In this study we examined the benefits of using aerosol optical depth (AOD) retrieved by the Geostationary Operational Environmental Satellite (GOES) in conjunction with land use and meteorologic information to estimate ground-level PM2.5 concentrations. Methods: We developed a two-stage generalized additive model (GAM) for U.S. Environmental Protection Agency PM2.5 concentrations in a domain centered in Massachusetts. The AOD model represents conditions when AOD retrieval is successful; the non-AOD model represents conditions when AOD is missing in the domain. Results: The AOD model has a higher predicting power judged by adjusted R2 (0.79) than does the non-AOD model (0.48). The predicted PM2.5 concentrations by the AOD model are, on average, 0.8–0.9 μg/m3 higher than the non-AOD model predictions, with a more smooth spatial distribution, higher concentrations in rural areas, and the highest concentrations in areas other than major urban centers. Although AOD is a highly significant predictor of PM2.5, meteorologic parameters are major contributors to the better performance of the AOD model. Conclusions: GOES aerosol/smoke product (GASP) AOD is able to summarize a set of weather and land use conditions that stratify PM2.5 concentrations into two different spatial patterns. Even if land use regression models do not include AOD as a predictor variable, two separate models should be fitted to account for different PM2.5 spatial patterns related to AOD availability

    A pilot study of the King LT supralaryngeal airway use in a rural Iowa EMS system

    Get PDF
    Introduction In 2003, the King Laryngeal Tube (LT) received FDA approval for US sales. Prehospital systems in urban setting have begun evaluating and adopting the LT for clinical airway management. However, it is not routinely approved by State EMS Boards for use by all prehospita

    A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals

    Get PDF
    The review describes recent progress on understanding and quantification of the various phenomena that take place during plasma electrolytic oxidation, which is in increasing industrial use for production of protective coatings and other surface treatment purposes. A general overview of the process, and some information about usage of these coatings, are provided in the first part of the review. The focus is then on the dielectric breakdown that repeatedly occurs over the surface of the work-piece. These discharges are central to the process, since it is largely via the associated plasmas that oxidation of the substrate takes place and the coating is created. The details are complex, since the discharge characteristics are affected by a number of processing variables. The inter-relationships between electrical conditions, electrolyte composition, coating microstructure and rates of growth, which are linked via the characteristics of the discharges, have become clearer over recent years and these improvements in understanding are summarized here. There is considerable scope for more effective process control, with specific objectives in terms of coating performance and energy efficiency, and an attempt is made to identify key points that are likely to assist this

    Health-state utilities in a prisoner population : a cross-sectional survey

    Get PDF
    Background: Health-state utilities for prisoners have not been described. Methods: We used data from a 1996 cross-sectional survey of Australian prisoners (n = 734). Respondent-level SF-36 data was transformed into utility scores by both the SF-6D and Nichol's method. Socio-demographic and clinical predictors of SF-6D utility were assessed in univariate analyses and a multivariate general linear model. Results: The overall mean SF-6D utility was 0.725 (SD 0.119). When subdivided by various medical conditions, prisoner SF-6D utilities ranged from 0.620 for angina to 0.764 for those with none/mild depressive symptoms. Utilities derived by the Nichol's method were higher than SF-6D scores, often by more than 0.1. In multivariate analysis, significant independent predictors of worse utility included female gender, increasing age, increasing number of comorbidities and more severe depressive symptoms. Conclusion: The utilities presented may prove useful for future economic and decision models evaluating prison-based health programs
    • …
    corecore