Hydrostatic Hamiltonian particle-mesh (HPM) methods for atmospheric modelling

We develop a hydrostatic Hamiltonian particle-mesh (HPM) method for efficient long-term numerical integration of the atmosphere. In the HPM method, the hydrostatic approximation is interpreted as a holonomic constraint for the vertical position of particles. This can be viewed as defining a set of vertically buoyant horizontal meshes, with the altitude of each mesh point determined so as to satisfy the hydrostatic balance condition and with particles modelling horizontal advection between the moving meshes. We implement the method in a vertical-slice model and evaluate its performance for the simulation of idealized linear and nonlinear orographic flow in both dry and moist environments. The HPM method is able to capture the basic features of the gravity wave to a degree of accuracy comparable with that reported in the literature. The numerical solution in the moist experiment indicates that the influence of moisture on wave characteristics is represented reasonably well and the reduction of momentum flux is in good agreement with theoretical analysis. Copyright © 2011 Royal Meteorological Societ

Sericin Promotes Fibroin Silk I Stabilization Across a Phase-Separation.

Natural silk spinning offers several advantages over the synthetic fiber spinning, although the underlying mechanisms of this process are yet to be fully elucidated. Silkworm silks, specifically B. mori, comprise two main proteins: fibroin, which forms the fiber, and sericin, a coextruded coating that acts as a matrix in the resulting nonwoven composite cocoon. To date, most studies have focused on fibroin's self-assembly and gelation, with the influence of sericin during spinning receiving little to no attention. This study investigates sericin's effects on the self-assembly of fibroin via their natural phase-separation. Through changes in sample opacity, FTIR, and XRD, we report that increasing sericin concentration retards the time to gelation and β-sheet formation of fibroin, causing it to adopt a Silk I conformation. Such findings have important implications for both the natural silk spinning process and any future industrial applications, suggesting that sericin may be able to induce long-range conformational and stability control in silk fibroin, while being in a separate phase, a factor that would facilitate long-term storage or silk feedstocks

Effect of additional buoyancy swimsuits on performance of competitive swimmers

When in water, the Centers of Buoyancy (CoB) and Mass (CoM) of the human body are positioned cranially and caudally, respectively. With increasing distance between these centers, the sinking torque of the lower limbs increases, with a subsequent decrease in swimming performance due to increased drag. Objective: To clarify the effect of additional buoyancy swimsuits on swimming performance. Methods: The subjects were eight competitive male swimmers of mean ±SD age 21±2 years. Swimming performance was compared between Conventional (CS) and Additional Buoyancy Swimsuits (ABS). CoM and CoB were identified on land and in water, respectively, with the swimmers maintaining a horizontal posture. CoM was measured by the reaction board method. CoB was calculated as the force exerted in the vertical direction accompanied by changes in inspiratory volume. Swimming velocity and Blood Lactate (BL) concentration value during 200 m front crawl in trials at four different speeds (curve test) were recorded as swimming performance. Results: No significant difference in inspiratory volume was observed between CS and ABS (small effect size, d=0.28). The distance between CoM and CoB was significantly shorter for CS than ABS (p < 0.001; large effect size, d=1.08). Both swimming velocity at BL of 4 mmol·L-1 and maximal effort were significantly faster for ABS (p < 0.042; 0.008), with large effect size (d=0.91; 0.98). However, there was no significant difference in maximal BL between CS and ABS (small effect size, d=0.37). Conclusion: ABS improves swimming performance by streamlining the horizontal posture.This work is supported by the JSPS KAKENHI, grant number 16K01713.info:eu-repo/semantics/publishedVersio

How does 11-week detraining affect 11-12 years old swimmers’ biomechanical determinants and its relationship with 100 m freestyle performance?

The aim of this study was to analyse the detraining process that occurs during a season break, and its influence on the performance, anthropometrics, and biomechanics of young swimmers. The sample included 54 young swimmers (22 boys: 12.79 +/- 0.71 years; 32 girls: 11.78 +/- 0.85 years). Performance for the 100 m freestyle and anthropometric and biomechanical variables were evaluated as main determinants. Performance impaired significantly for boys (2.17%) and girls (1.91%). All anthropometric variables increased between moments of assessment for boys and girls. Overall, the boys enhanced all biomechanical variables during the detraining period, and girls showed mixed results. For both sexes, the stroke index was the variable with the highest increase (boys: Delta = 16.16%; d = 0.89; p = 0.001; girls: Delta = 19.51%; d = 1.06; p = 0.002). Hierarchical linear modelling showed that the height retained the amount of impairment in the performance. One unit of increase in the height (cm) led to less 0.41 s impairment in the performance. Present data indicated that during an 11-weeks detraining period, young swimmers impaired their performance, but the determinant factors showed an impaired relationship. This increase in the determinant factors is mainly related to the increase in the swimmers' anthropometrics. Moreover, the increase in height was responsible for retaining the performance impairment.This project was supported by National Funds through FCT -Portuguese Foundation for Science and Technology (UID/DTP/04045/2019), and the European Fund for regional development (FEDER) allocated by the European Union through the COMPETE 2020 Programme (POCI01-0145-FEDER-006969).info:eu-repo/semantics/publishedVersio

Comparison of swimming velocity between age-group swimmers through discrete variables and continuous variables by Statistical Parametric Mapping

The aim of this study was to compare the swimming velocity in frontcrawl between age-group swimmers using discrete variables against Statistical Parametric Mapping (SPM). The sample consisted of 30 young male swimmers divided into three groups (each with 10 swimmers) based on their age (group #1: 13.60 ± 0.84 years; group #2: 15.40 ± 0.32 years; group 3: 16.39 ± 0.69 years). Swimmers performed three maximal trials in front-crawl. The best performance was used for analysis. Comparison of swimming velocity between groups was analysed using discrete variables and as a continuous variable (SPM). As a discrete variable, the mean swimming velocity showed a significant difference between groups (p < 0.05). Moreover, when analysed by SPM, swimming velocity showed a significant difference (p = 0.021) between the ~ 44% and ~ 51% of the stroke cycle (transition of the propulsion phases between sides). Post-hoc comparison revealed a significant difference between group #1 and group #3 only in SPM analysis. Researchers, coaches, and practitioners should know that both measurement approaches can be used simultaneously. However, SPM offers more sensitive and accurate results about the swimmers’ stroke cycle.This work is supported by national funds (FCT – Portuguese Foundation for Science and Technology) under the project [UIDB/DTP/04045/2020]info:eu-repo/semantics/publishedVersio

The effect of the start and finish in the 50 m and 100 m freestyle performance in elite male swimmers

The aim of this study was to: (1) verify differences between swimmers of the same competitive level in variables related to the start and finish (50 m and 100 m freestyle); (2) verify if starting and finish variables are responsible for faster race time, and which starting variables are responsible for the start performance in such events. For the 50 m and 100 m freestyle race at the junior European Championships 2019, 86 and 88 male swimmers were analysed, respectively. A set of starting and finishing variables were used for analysis. Both races (50 m: p < 0.001; 100 m: p < 0.001) presented a significant level effect for the final race time. The same trend was observed for the start and finish performances. For both races, hierarchical linear modelling retained the 15 m mark time and finish speed as predictors. The 50 m start retained the reaction time and underwater speed, and the 100 m start retained the reaction time and the water break distance. This indicates the underwater phase of the start is of substantial importance to improve the 15 m mark time. Coaches and swimmers are advised to enhance the start underwater phase, and finish segments to improve the swimmers’ performance.This work was supported by the Fundação para a Ciência e a Tecnologia [UIDB/DTP/04045/2020].info:eu-repo/semantics/publishedVersio

A jump-growth model for predator-prey dynamics: derivation and application to marine ecosystems

This paper investigates the dynamics of biomass in a marine ecosystem. A stochastic process is defined in which organisms undergo jumps in body size as they catch and eat smaller organisms. Using a systematic expansion of the master equation, we derive a deterministic equation for the macroscopic dynamics, which we call the deterministic jump-growth equation, and a linear Fokker-Planck equation for the stochastic fluctuations. The McKendrick--von Foerster equation, used in previous studies, is shown to be a first-order approximation, appropriate in equilibrium systems where predators are much larger than their prey. The model has a power-law steady state consistent with the approximate constancy of mass density in logarithmic intervals of body mass often observed in marine ecosystems. The behaviours of the stochastic process, the deterministic jump-growth equation and the McKendrick--von Foerster equation are compared using numerical methods. The numerical analysis shows two classes of attractors: steady states and travelling waves.Comment: 27 pages, 4 figures. Final version as published. Only minor change

One particle spectral weight of the three dimensional single band Hubbard model

Dynamic properties of the three-dimensional single-band Hubbard model are studied using Quantum Monte Carlo combined with the maximum entropy technique. At half-filling, there is a clear gap in the density of states and well-defined quasiparticle peaks at the top (bottom) of the lower (upper) Hubbard band. We find an antiferromagnetically induced weight above the naive Fermi momentum. Upon hole doping, the chemical potential moves to the top of the lower band where a robust peak is observed. Results are compared with spin-density-wave (SDW) mean-field and self consistent Born approximation results, and also with the infinite dimensional Hubbard model, and experimental photoemission (PES) for three dimensional transition-metal oxides.Comment: 11 pages, REVTeX, 16 figures included using psfig.sty. Ref.30 correcte

Dynamic Analysis of Unidirectional Pressure Infiltration of Porous Preforms by Pure Metals

Unidirectional pressure infiltration of porous preforms by molten metals is investigated numerically. A phenomenological model to describe fluid flow and transport phenomena during infiltration of fibrous preforms by a metal is formulated. The model describes the dynamics of the infiltration process, the temperature distribution, and solid fraction distribution. The numerical results are compared against classical asymptotic analyses and experimental results. This comparison shows that end effects may become important and render asymptotic results unreliable for realistic samples. Fiber volume fraction and initial temperature appear as the factors most strongly influencing infiltration. Metal superheating affects not only the length of the two-phase zone but also the solid fraction distribution in the two-phase zone. The effect of constant applied pressure, although significant on the infiltration velocity, is almost negligible on the two-phase zone length and on solid fraction distribution. When the initial preform temperature is below the metal melting point, and constant pressure is applied under adiabatic conditions, the flow ceases when sufficient solidification occurs to obstruct it. A comparison with literature experiments proves the model to be an efficient predictive tool in the analysis of infiltration processes for different preform/melt systems

Reversible Pressure-Induced Amorphization in Solid C70 : Raman and Photoluminescence Study

We have studied single crystals of $C_{70}$ by Raman scattering and photoluminescence in the pressure range from 0 to 31.1 GPa. The Raman spectrum at 31.1 GPa shows only a broad band similar to that of the amorphous carbon without any trace of the Raman lines of $C_{70}$. After releasing the pressure from 31.1 GPa, the Raman and the photoluminescence spectra of the recovered sample are that of the starting $C_{70}$ crystal. These results indicate that the $C_{70}$ molecules are stable upto 31.1 GPa and the amorphous carbon high pressure phase is reversible, in sharp contrast to the results on solid $C_{60}$. A qualitative explaination is suggested in terms of inter- versus intra-molecular interactions.Comment: To appear in Phys. Rev. Lett., 12 pages, RevTeX (preprint format), 3 figures available upon reques