557 research outputs found
Native socio-economic development in Canada : change, promise and innovation
iii, 60 p., digital fil
Effect of La doping on magnetic structure in heavy fermion CeRhIn5
The magnetic structure of Ce0.9La0.1RhIn5 is measured using neutron
diffraction. It is identical to the incommensurate transverse spiral for
CeRhIn5, with a magnetic wave vector q_M=(1/2,1/2,0.297), a staggered moment of
0.38(2)Bohr magneton per Ce at 1.4K and a reduced Neel temperature of 2.7 K.Comment: 5 pages, 2 figures, 1 table. Conf. SCES'200
Evidence for Possible Phase-Separations in RuSr2(Gd,Ce)2Cu2O10-delta
An unusual thermal-magnetic hysteresis was observed between a minor magnetic
transition around 120 K and the main one at 80 K in superconducting
RuSr2(R,Ce)2Cu2O10-delta (Ru1222R) samples, where R = Gd or Eu, down to a
submicron length-scale. The observation suggests a possible phase-separation
and is consistent with the very small but universal demagnetizing factor
observed, which is difficult to reconcile with the canted spin-structure
previously proposed. In such a scenario, the unusual superconducting properties
of the Ru-based cuprates can also be understood naturally.Comment: 8 pages, 3 figures, submitted to Phys. Rev. B, "Rapid Communications"
(September 26, 2001
Synthesis effects on the magnetic and superconducting properties of RuSr2GdCu2O8
A systematic study on the synthesis of the Ru-1212 compound by preparing a
series of samples that were annealed at increasing temperatures and then
quenched has been performed. It results that the optimal temperature for the
annealing lies around 1060-1065 C; a further temperature increase worsens the
phase formation. Structural order is very important and the subsequent grinding
and annealing improves it. Even if from the structural point of view the
samples appear substantially similar, the physical characterization highlight
great differences both in the electrical and magnetic properties related to
intrinsic properties of the phase as well as to the connection between the
grains as inferred from the resistive and the Curie Weiss behaviour at high
temperature as well as in the visibility of ZFC anf FC magnetic signals.Comment: 17 pages, 12 figures. Proc. Int. Workshop " Ruthenate and
rutheno-cuprate materials: theory and experiments", Vietri, October 2001. To
be published on LNP Series, Springer Verlag, Berlin, C. Noce, A. Vecchione,
M. Cuoco, A. Romano Eds, 200
Electronic States in Two-Dimensional Triangular Cobalt Oxides: Role of Electronic Correlation
We obtain the electronic states and structures of two-dimensional cobalt
oxides, NaCoO (x=0, 0.35, 0.5 and 0.75) by utilizing the
full-potential linear muffin-tin orbitals (FP-LMTO) methods, from which some
essential electronic interaction parameters are estimated: the bare on-site
Coulomb interaction of cobalt U=7.5 eV renormalizes to 5 eV for x=0.35,
the hybridizations t and t are -1.40 and 0.70 eV,
respectively. The density of states at E decreases from 6-7 states/eV in
the local density approximation (LDA) to about 1.0 states/eV in the LDA+U
scheme. The role of the intercalation of water molecules and the microscopic
mechanism of the superconductivity in NaCoOmHO is
discussed.Comment: minor errors correcte
Inter-rater reliability of the EPUAP pressure ulcer classification system using photographs
Background. Many classification systems for grading pressure ulcers are discussed in the literature. Correct identification and classification of a pressure ulcer is important for accurate reporting of the magnitude of the problem, and for timely prevention. The reliability of pressure ulcer classification systems has rarely been tested. Aims and objectives. The purpose of this paper is to examine the inter-rater reliability of classifying pressure ulcers according to the European Pressure Ulcer Advisory Panel classification system when using pressure ulcer photographs.Design. Survey was among pressure ulcer experts.Methods. Fifty-six photographs were presented to 44 pressure ulcer experts. The experts classified the lesions as normal skin, blanchable erythema, pressure ulcer (four grades) or incontinence lesion. Inter-rater reliability was calculated.Results. The multirater-Kappa for the entire group of experts was 0.80 (P < 0.001).Various groups of experts obtained comparable results. Differences in classifications are mainly limited to 1 degree of difference. Incontinence lesions are most often confused with grade 2 (blisters) and grade 3 pressure ulcers (superficial pressure ulcers).Conclusions. The inter-rater reliability of the European Pressure Ulcer Advisory Panel classification appears to be good for the assessment of photographs by experts. The difference between an incontinence lesion and a blister or a superficial pressure ulcer does not always seem clear.Relevance to clinical practice. The ability to determine correctly whether a lesion is a pressure ulcer lesion is important to assess the effectiveness of preventive measures. In addition, the ability to make a correct distinction between pressure ulcers and incontinence lesions is important as they require different preventive measures. A faulty classification leads to mistaken measures and negative results. Photographs can be used as a practice instrument to learn to discern pressure ulcers from incontinence lesions and to get to know the different grades of pressure ulcers. The Pressure Ulcer Classification software package has been developed to facilitate learning
Spin Glass Behavior in RuSr2Gd1.5Ce0.5Cu2O10
The dynamics of the magnetic properties of polycrystalline
RuSr2Gd1.5Ce0.5Cu2O10 (Ru-1222) have been studied by ac susceptibility and dc
magnetization measurements, including relaxation and ageing studies. Ru-1222 is
a reported magneto-superconductor with Ru spins magnetic ordering at
temperatures near 100 K and superconductivity in Cu-O2 planes below Tc ~ 40 K.
The exact nature of Ru spins magnetic ordering is still debated and no
conclusion has been reached yet. In this work, a frequency-dependent cusp was
observed in ac susceptibility vs. T measurements, which is interpreted as a
spin glass transition. The change in the cusp position with frequency follows
the Vogel-Fulcher law, which is commonly accepted to describe a spin glass with
magnetically interacting clusters. Such interpretation is supported by
themoremanaent magnetization (TRM) measurements at T = 60 K. TRM relaxations
are well described by a stretched exponential relation, and present significant
ageing effects.Comment: 4 pages, 6 figures, submitted to Phys. Rev.
Ruthenocuprates RuSr2(Eu,Ce)2Cu2O10: Intrinsic magnetic multilayers
We report ac susceptibility data on RuSr_2(Eu,Ce)_2Cu_2O_(10-y) (Ru-1222, Ce
content x=0.5 and 1.0), RuSr_2GdCu_2O_8 (Ru-1212) and SrRuO_3. Both Ru-1222
(x=0.5, 1.0) sample types exhibit unexpected magnetic dynamics in low magnetic
fields: logarithmic time relaxation, switching behavior, and `inverted'
hysteresis loops. Neither Ru-1212 nor SrRuO_3 exhibit such magnetic dynamics.
The results are interpreted as evidence of the complex magnetic order in
Ru-1222. We propose a specific multilayer model to explain the data, and note
that superconductivity in the ruthenocuprate is compatible with both the
presence and absence of the magnetic dynamics.Comment: 9 pages, 11 figures, Revtex; submitted to Phys.Rev.
Superconducting properties of RuSr2GdCu2O8 studied by SQUID magnetometry
For polycrystalline RuSr2GdCu2O8 (Ru-1212), distinct peaks have been reported
in d.c. magnetization in the superconducting state of the sample. Sr2GdRuO6
(Sr-2116), the precursor for the preparation of Ru-1212, shows similar peaks in
the same temperature regime. Based on measurements performed on both bulk and
powdered samples of Ru-1212 and Sr-2116, we exclude the possibility, that the
observed behavior of the magnetization of Ru-1212 is due to Sr-2116 impurities.
The effect is related to the superconductivity of Ru-1212, but it is not an
intrinsic property of this compound. We provide evidence that the observation
of magnetization peaks in the superconducting state of Ru-1212 is due to flux
motion generated by the movement of the sample in an inhomogeneous field,
during the measurement in the SQUID magnetometer. We propose several tests,
that help to decide, whether the features observed in a SQUID magnetization
measurement of Ru-1212 represent a property of the compound or not.Comment: 22 pages, 9 figure
Novel Approach to Confront Electroweak Data and Theory
A novel approach to study electroweak physics at one-loop level in generic
theories is introduced. It separates the 1-loop
corrections into two pieces: process specific ones from vertex and box
contributions, and universal ones from contributions to the gauge boson
propagators. The latter are parametrized in terms of four effective form
factors , , and corresponding to the , , and
propagators. Under the assumption that only the Standard Model contributes to
the process specific corrections, the magnitudes of the four form factors are
determined at and at q^2=\mmz by fitting to all available precision
experiments. These values are then compared systematically with predictions of
theories. In all fits \alpha_s(\mz) and
\bar{\alpha}(\mmz) are treated as external parameters in order to keep the
interpretation as flexible as possible. The treatment of the electroweak data
is presented in detail together with the relevant theoretical formulae used to
interpret the data. No deviation from the Standard Model has been identified.
Ranges of the top quark and Higgs boson masses are derived as functions of
\alpha_s(\mz) and \bar{\alpha}(\mmz). Also discussed are consequences of
the recent precision measurement of the left-right asymmetry at SLC as well as
the impact of a top quark mass and an improved mass measurement.Comment: 123 pages, LaTeX (33 figures available via anonymous ftp),
KEK-TH-375, KEK preprint 93-159, KANAZAWA-94-19, DESY 94-002, YUMS 94-22,
SNUTP 94-82, to be published in Z.Phys.
- …