Beam Profile Influence on Polymerization Characteristics of Resin-Matrix Composites

poster abstractThe objective of this study was to quantify the homogeneity of the beam of light radiated from each of two different light-curing units (LCUs) using beam profiling, and then evaluate the relationship between these beam profiles and polymerization patterns of a resin-matrix composite (RMC). Beam profile and irradiance measurements of one light-emitting diode (LED) and one quartz-tungsten-halogen (QTH) curing unit were collected using a beam-profiler-system and a MARC-RC resin calibrator, respectively. The camera-based beam-profiler-system (BGP-USB-SP620 with 50-mm-lens, Ophir-Spiricon) combined radiant-power-values from an irradiance-probe (cosine-corrector/spectrometer-assembly) to measure beam-homogeneity (the distribution of irradiance-values across the light-beam) for each curing-unit. A mapping approach was used to investigate the polymerization pattern of nano-hybrid RMC samples (5×5×2mm) at various depths utilizing both micro-Raman-spectroscopy (degree-of-conversion, DC) and ethanol softening (cross-link-density, CLD), which was determined using automated-microhardness testing after exposure to ethanol. Two-sample t-tests with unequal-variances were used to compare the LCUs for differences in irradiance (mW/cm2) and radiant-exposure (J/cm2). Comparisons among polymerization by depths with-respect-to LCU were made using paired t-tests and two-sample t-tests as appropriate for the specific depths. The effects at each depth of location on the sample and LCU were tested using mixed-model ANOVA. The LED demonstrated inhomogeneity and significantly higher irradiance values compared to the QTH. Both LCUs demonstrated variations in DC (62-74%) and percent Knoop hardness number (KHN) reduction (33-49%) at different depths and locations. A gradual decrease in KHN occurred from top to bottom in the RMC cured with QTH unlike the LED. A gradual decrease in CLD was exhibited in both LCUs. This study showed that the beam-profile-inhomogeneity of QTH and LED curing-units resulted in localized differences in DC, KHN and CLD of RMC samples at specific depths and locations. However, adequate polymerization of the RMC was achieved at all points when using the LED LCU

Solidification of Al alloys under electromagnetic pulses and characterization of the 3D microstructures under synchrotron x-ray tomography

A novel programmable electromagnetic pulse device was developed and used to study the solidification of Al-15 pct Cu and Al-35 pct Cu alloys. The pulsed magnetic fluxes and Lorentz forces generated inside the solidifying melts were simulated using finite element methods, and their effects on the solidification microstructures were characterized using electron microscopy and synchrotron X-ray tomography. Using a discharging voltage of 120 V, a pulsed magnetic field with the peak Lorentz force of ~1.6 N was generated inside the solidifying Al-Cu melts which were showed sufficiently enough to disrupt the growth of the primary Al dendrites and the Al2Cu intermetallic phases. The microstructures exhibit a strong correlation to the characteristics of the applied pulse, forming a periodical pattern that resonates the frequency of the applied electromagnetic field

Magnetic ground state of the one-dimensional ferromagnetic chain compounds M(NCS)2(thiourea)2 (M=Ni,Co)

The magnetic properties of the two isostructural molecule-based magnets—Ni(NCS)2(thiourea)2, S = 1 [thiourea = SC(NH2 )2] and Co(NCS)2 (thiourea)2, S = 3/2—are characterized using several techniques in order to rationalize their relationship with structural parameters and to ascertain magnetic changes caused by substitution of the spin. Zero-field heat capacity and muon-spin relaxation measurements reveal low-temperature long-range ordering in both compounds, in addition to Ising-like (D < 0) single-ion anisotropy (DCo ∼ −100 K, DNi ∼ −10 K). Crystal and electronic structure, combined with dc-field magnetometry, affirm highly quasi-onedimensional behavior, with ferromagnetic intrachain exchange interactions JCo ≈ +4 K and JNi ∼ +100 K and weak antiferromagnetic interchain exchange, on the order of J ∼ −0.1 K. Electron charge- and spin-density mapping reveals through-space exchange as a mechanism to explain the large discrepancy in J-values despite, from a structural perspective, the highly similar exchange pathways in both materials. Both species can be compared to the similar compounds MCl2(thiourea)4, M = Ni(II) (DTN) and Co(II) (DTC), where DTN is known to harbor two magnetic-field-induced quantum critical points. Direct comparison of DTN and DTC with the compounds studied here shows that substituting the halide Cl− ion for the NCS− ion results in a dramatic change in both the structural and magnetic properties

Framework for evaluating the health impact of the scale-up of malaria control interventions on all-cause child mortality in Sub-Saharan Africa

Concerted efforts from national and international partners have scaled up malaria control interventions, including insecticide-treated nets, indoor residual spraying, diagnostics, prompt and effective treatment of malaria cases, and intermittent preventive treatment during pregnancy in sub-Saharan Africa (SSA). This scale-up warrants an assessment of its health impact to guide future efforts and investments; however, measuring malaria-specific mortality and the overall impact of malaria control interventions remains challenging. In 2007, Roll Back Malaria's Monitoring and Evaluation Reference Group proposed a theoretical framework for evaluating the impact of full-coverage malaria control interventions on morbidity and mortality in high-burden SSA countries. Recently, several evaluations have contributed new ideas and lessons to strengthen this plausibility design. This paper harnesses that new evaluation experience to expand the framework, with additional features, such as stratification, to examine subgroups most likely to experience improvement if control programs are working; the use of a national platform framework; and analysis of complete birth histories from national household surveys. The refined framework has shown that, despite persisting data challenges, combining multiple sources of data, considering potential contributions from both fundamental and proximate contextual factors, and conducting subnational analyses allows identification of the plausible contributions of malaria control interventions on malaria morbidity and mortality

Coherent matter wave inertial sensors for precision measurements in space

We analyze the advantages of using ultra-cold coherent sources of atoms for matter-wave interferometry in space. We present a proof-of-principle experiment that is based on an analysis of the results previously published in [Richard et al., Phys. Rev. Lett., 91, 010405 (2003)] from which we extract the ratio h/m for 87Rb. This measurement shows that a limitation in accuracy arises due to atomic interactions within the Bose-Einstein condensate

Simulation of Channel Segregation During Directional Solidification of In—75 wt pct Ga. Qualitative Comparison with In Situ Observations

International audienceFreckles are common defects in industrial casting. They result from thermosolutal convection due to buoyancy forces generated from density variations in the liquid. The present paper proposes a numerical analysis for the formation of channel segregation using the three-dimensional (3D) cellular automaton (CA)—finite element (FE) model. The model integrates kinetics laws for the nucleation and growth of a microstructure with the solution of the conservation equations for the casting, while introducing an intermediate modeling scale for a direct representation of the envelope of the dendritic grains. Directional solidification of a cuboid cell is studied. Its geometry, the alloy chosen as well as the process parameters are inspired from experimental observations recently reported in the literature. Snapshots of the convective pattern, the solute distribution, and the morphology of the growth front are qualitatively compared. Similitudes are found when considering the coupled 3D CAFE simulations. Limitations of the model to reach direct simulation of the experiments are discussed

Observation of hard scattering in photoproduction events with a large rapidity gap at HERA

Events with a large rapidity gap and total transverse energy greater than 5 GeV have been observed in quasi-real photoproduction at HERA with the ZEUS detector. The distribution of these events as a function of the $\gamma p$ centre of mass energy is consistent with diffractive scattering. For total transverse energies above 12 GeV, the hadronic final states show predominantly a two-jet structure with each jet having a transverse energy greater than 4 GeV. For the two-jet events, little energy flow is found outside the jets. This observation is consistent with the hard scattering of a quasi-real photon with a colourless object in the proton.Comment: 19 pages, latex, 4 figures appended as uuencoded fil

D* Production in Deep Inelastic Scattering at HERA

This paper presents measurements of D^{*\pm} production in deep inelastic scattering from collisions between 27.5 GeV positrons and 820 GeV protons. The data have been taken with the ZEUS detector at HERA. The decay channel $D^{*+}\to (D^0 \to K^- \pi^+) \pi^+$ (+ c.c.) has been used in the study. The $e^+p$ cross section for inclusive D^{*\pm} production with $5<Q^2<100 GeV^2$ and $y<0.7$ is 5.3 \pms 1.0 \pms 0.8 nb in the kinematic region {$1.3<p_T(D^{*\pm})<9.0$ GeV and $| \eta(D^{*\pm}) |<1.5$}. Differential cross sections as functions of p_T(D^{*\pm}), $\eta(D^{*\pm}), W$ and $Q^2$ are compared with next-to-leading order QCD calculations based on the photon-gluon fusion production mechanism. After an extrapolation of the cross section to the full kinematic region in p_T(D^{*\pm}) and $\eta$(D^{*\pm}), the charm contribution $F_2^{c\bar{c}}(x,Q^2)$ to the proton structure function is determined for Bjorken $x$ between 2 $\cdot$ 10$^{-4}$ and 5 $\cdot$ 10$^{-3}$.Comment: 17 pages including 4 figure

Observation of Scaling Violations in Scaled Momentum Distributions at HERA

Charged particle production has been measured in deep inelastic scattering (DIS) events over a large range of $x$ and $Q^2$ using the ZEUS detector. The evolution of the scaled momentum, $x_p$, with $Q^2,$ in the range 10 to 1280 $GeV^2$, has been investigated in the current fragmentation region of the Breit frame. The results show clear evidence, in a single experiment, for scaling violations in scaled momenta as a function of $Q^2$.Comment: 21 pages including 4 figures, to be published in Physics Letters B. Two references adde

Separability criteria and entanglement witnesses for symmetric quantum states

We study the separability of symmetric bipartite quantum states and show that a single correlation measurement is sufficient to detect the entanglement of any bipartite symmetric state with a non-positive partial transpose. We also discuss entanglement conditions and entanglement witnesses for states with a positive partial transpose.Comment: 5 pages, no figures, LaTeX; v2: typos corrected, introduction extended; v3: small corrections, published version; for the proceedings of the DPG spring meeting, Hamburg, March 200