819 research outputs found
Hydrological functioning of western African inland valleys explored with a critical zone model
Inland valleys are seasonally waterlogged headwater wetlands, widespread
across western Africa. Their role in the hydrological cycle in the humid,
hard-rock-dominated Sudanian savanna is not yet well understood. Thus, while
in the region recurrent floods are a major issue, and hydropower has been
recognized as an important development pathway, the scientific community
lacks precise knowledge of streamflow (Q) generation processes and how they
could be affected by the presence of inland valleys. Furthermore, inland
valleys carry an important agronomic potential, and with the strong
demographic rates of the region, they are highly subject to undergoing land
cover changes. We address both the questions of the hydrological functioning
of inland valleys in the Sudanian savanna of western Africa and the impact of
land cover changes on these systems through deterministic sensitivity
experiments using a physically based critical zone model (ParFlow-CLM)
applied to a virtual generic catchment which comprises an inland valley.
Model forcings are based on 20Â years of data from the AMMA-CATCH observation
service and parameters are evaluated against multiple field data (Q,
evapotranspiration â ET â, soil moisture, water table levels, and water
storage) acquired on a pilot elementary catchment. The hydrological model
applied to the conceptual lithological/pedological model proposed in this
study reproduces the main behaviours observed, which allowed those virtual
experiments to be conducted. We found that yearly water budgets were highly
sensitive to the vegetation distribution: average yearly ET for a
tree-covered catchment (944 mm) exceeds that of herbaceous cover (791 mm).
ET differences between the two covers vary between 12 % and 24 % of
the precipitation of the year for the wettest and driest years, respectively.
Consequently, the tree-covered catchment produces a yearly Q amount of
28 % lower on average as compared to a herbaceous-covered catchment,
ranging from 20 % for the wettest year to 47 % for a dry year. Trees
also buffer interannual variability in ET by 26 % (with respect to
herbaceous). On the other hand, pedological features (presence â or absence
â of the low-permeability layer commonly found below inland valleys,
upstream and lateral contributive areas) had limited impact on yearly water
budgets but marked consequences for intraseasonal hydrological processes
(sustained/non-sustained baseflow in the dry season, catchment water storage
redistribution). Therefore, subsurface features and vegetation cover of
inland valleys have potentially significant impacts on downstream
water-dependent ecosystems and water uses as hydropower generation, and
should focus our attention.</p
Intercomparison of four different in-situ techniques for ambient formaldehyde measurements in urban air
International audienceResults from an intercomparison of several currently used in-situ techniques for the measurement of atmospheric formaldehyde (CH2O) are presented. The measurements were carried out at Bresso, an urban site in the periphery of Milan (Italy) as part of the FORMAT-I field campaign. Eight instruments were employed by six independent research groups using four different techniques: Differential Optical Absorption Spectroscopy (DOAS), Fourier Transform Infra Red (FTIR) interferometry, the fluorimetric Hantzsch reaction technique (five instruments) and a chromatographic technique employing C18-DNPH-cartridges (2,4-dinitrophenylhydrazine). White type multi-reflection systems were employed for the optical techniques in order to avoid spatial CH2O gradients and ensure the sampling of nearly the same air mass by all instruments. Between 23 and 31 July 2002, up to 13 ppbv of CH2O were observed. The concentrations lay well above the detection limits of all instruments. The formaldehyde concentrations determined with DOAS, FTIR and the Hantzsch instruments were found to agree within ±11%, with the exception of one Hantzsch instrument, which gave systematically higher values. The two hour integrated samples by DNPH yielded up to 25% lower concentrations than the data of the continuously measuring instruments averaged over the same time period. The consistency between the DOAS and the Hantzsch method was better than during previous intercomparisons in ambient air with slopes of the regression line not significantly differing from one. The differences between the individual Hantzsch instruments could be attributed in part to the calibration standards used. Possible systematic errors of the methods are discussed
Photochemical modelling in the Po basin with focus on formaldehyde and ozone
As part of the EU project FORMAT ( Formaldehyde as a Tracer of Oxidation in the Troposphere), a field campaign was carried out in the vicinity of Milan during the summer of 2002. Results from a 3-D regional chemical transport model (NILU RCTM) were used to interpret the observations focusing primarily on HCHO and ozone. The performance of the model was assessed by comparing model results with ground based and aircraft measurements. The model results show good agreement with surface measurements, and the model is able to reproduce the photochemical episodes during fair weather days. The comparison indicates that the model can represent well the HCHO concentrations as well as their temporal and spatial variability. The relationship between HCHO and (O-3 x H2O) was used to validate the model ability to predict the HCHO concentrations. Further analysis revealed the importance of the representativeness of different instruments: in-situ concentrations might be locally enhanced by emissions, while long path measurements over a forest can be influenced by rapid formation of HCHO from isoprene. The model is able to capture the plume from the city of Milan and the modelled levels agree generally well with the aircraft measurements, although the wind fields used in the model can lead to a displacement of the ozone plume. During the campaign period, O3 levels were seldom higher than 80 ppb, the peak surface ozone maxima reached 90 ppb. Those relatively low values can be explained by low emissions during the August vacation and unstable weather conditions in this period. The modelled Delta O-3/Delta NOz slope at Alzate of 5.1 agrees well with the measured slope of 4.9
Early in-flight detection of SO<sub>2</sub> via Differential Optical Absorption Spectroscopy: a feasible aviation safety measure to prevent potential encounters with volcanic plumes
Volcanic ash constitutes a risk to aviation, mainly due to its ability to cause jet engines to fail. Other risks include the possibility of abrasion of windshields and potentially serious damage to avionic systems. These hazards have been widely recognized since the early 1980s, when volcanic ash provoked several incidents of engine failure in commercial aircraft. In addition to volcanic ash, volcanic gases also pose a threat. Prolonged and/or cumulative exposure to sulphur dioxide (SO<sub>2</sub>) or sulphuric acid (H<sub>2</sub>SO<sub>4</sub>) aerosols potentially affects e.g. windows, air frame and may cause permanent damage to engines. SO<sub>2</sub> receives most attention among the gas species commonly found in volcanic plumes because its presence above the lower troposphere is a clear proxy for a volcanic cloud and indicates that fine ash could also be present. <br><br> Up to now, remote sensing of SO<sub>2</sub> via Differential Optical Absorption Spectroscopy (DOAS) in the ultraviolet spectral region has been used to measure volcanic clouds from ground based, airborne and satellite platforms. Attention has been given to volcanic emission strength, chemistry inside volcanic clouds and measurement procedures were adapted accordingly. Here we present a set of experimental and model results, highlighting the feasibility of DOAS to be used as an airborne early detection system of SO<sub>2</sub> in two spatial dimensions. In order to prove our new concept, simultaneous airborne and ground-based measurements of the plume of PopocatĂ©petl volcano, Mexico, were conducted in April 2010. The plume extended at an altitude around 5250 m above sea level and was approached and traversed at the same altitude with several forward looking DOAS systems aboard an airplane. These DOAS systems measured SO<sub>2</sub> in the flight direction and at ±40 mrad (2.3°) angles relative to it in both, horizontal and vertical directions. The approaches started at up to 25 km distance to the plume and SO<sub>2</sub> was measured at all times well above the detection limit. In combination with radiative transfer studies, this study indicates that an extended volcanic cloud with a concentration of 10<sup>12</sup> molecules cm<sup>−3</sup> at typical flight levels of 10 km can be detected unambiguously at distances of up to 80 km away. This range provides enough time (approx. 5 min) for pilots to take action to avoid entering a volcanic cloud in the flight path, suggesting that this technique can be used as an effective aid to prevent dangerous aircraft encounters with potentially ash rich volcanic clouds
Local barrier dysfunction identified by confocal laser endomicroscopy predicts relapse in inflammatory bowel disease
Loss of intestinal barrier function plays an important role in the pathogenesis of inflammatory bowel disease (IBD). Shedding of intestinal epithelial cells is a potential cause of barrier loss during inflammation. The objectives of the study were (1) to determine whether cell shedding and barrier loss in humans can be detected by confocal endomicroscopy and (2) whether these parameters predict relapse of IBD
If players are sparse social dilemmas are too: Importance of percolation for evolution of cooperation
Spatial reciprocity is a well known tour de force of cooperation promotion. A
thorough understanding of the effects of different population densities is
therefore crucial. Here we study the evolution of cooperation in social
dilemmas on different interaction graphs with a certain fraction of vacant
nodes. We find that sparsity may favor the resolution of social dilemmas,
especially if the population density is close to the percolation threshold of
the underlying graph. Regardless of the type of the governing social dilemma as
well as particularities of the interaction graph, we show that under pairwise
imitation the percolation threshold is a universal indicator of how dense the
occupancy ought to be for cooperation to be optimally promoted. We also
demonstrate that myopic updating, due to the lack of efficient spread of
information via imitation, renders the reported mechanism dysfunctional, which
in turn further strengthens its foundations.Comment: 6 two-column pages, 5 figures; accepted for publication in Scientific
Reports [related work available at http://arxiv.org/abs/1205.0541
- âŠ