Radiation-induced root surface caries restored with glass-ionomer cement placed in conventional and ART cavity preparations: Results at two years

The document attached has been archived with permission from the Australian Dental Association (8th Jan 2008). An external link to the publisher’s copy is included.Background: There are no published studies comparing the clinical performances of more-viscous glass-ionomer cement (GIC) restorations when placed using conventional and atraumatic restorative treatment (ART) cavity preparation methods to restore root surface caries. Methods: One dentist used encapsulated Fuji IX GP and Ketac-Molar to restore 72 conventional and 74 ART cavity preparations for 15 patients who had received cervicofacial radiation therapy. Two assessors evaluated the restorations at six, 12, and 24 months for retention, marginal defects and surface wear, and recurrent caries. Results: After two years, the cumulative restoration successes were 65.2 per cent for the conventional and 66.2 per cent for the ART cavity preparations, without statistical or clinical significance (P>0.50). Restoration dislodgement accounted for 82.8 per cent and marginal defects for 17.2 per cent of all failures. There were no instances of unsatisfactory restoration wear or recurrent caries observed. Teeth with three or more restored cervical surfaces accounted for 79.3 per cent of all failures (P<0.0001). Conclusions: For root surface caries restored with GIC, the use of hand instruments only with the ART method was an equally effective alternative to conventional rotary instrumentation for cavity preparation. Larger restorations had higher failures, usually from dislodgement.JY Hu, XC Chen, YQ Li, RJ Smales and KH Yi

Effects of dental probing on occlusal surfaces - A scanning electron microscopy evaluation

The aim of this clinical-morphological study was to investigate the effects of dental probing on occlusal surfaces by scanning electron microscopy (SEM). Twenty sound occlusal surfaces of third molars and 20 teeth with initial carious lesions of 17- to 26-year-old patients (n = 18) were involved. Ten molars of each group were probed with a sharp dental probe (No. 23) before extraction; the other molars served as negative controls. After extraction of the teeth, the crowns were separated and prepared for the SEM study. Probing-related surface defects, enlargements and break-offs of occlusal pits and fissures were observed on all occlusal surfaces with initial carious lesions and on 2 sound surfaces, respectively. No traumatic defects whatsoever were visible on unprobed occlusal surfaces. This investigation confirms findings of light-microscopic studies that using a sharp dental probe for occlusal caries detection causes enamel defects. Therefore, dental probing should be considered as an inappropriate procedure and should be replaced by a meticulous visual inspection. Critical views of tactile caries detection methods with a sharp dental probe as a diagnostic tool seem to be inevitable in undergraduate and postgraduate dental education programmes. Copyright (c) 2007 S. Karger AG, Basel

3D meso-scale modelling of concrete material in spall tests

Tensile strength is one of the key factors of concrete material that need be accurately defined in analysis of concrete structures subjected to high-speed impact loads. Dynamic tensile strength of concrete material is usually obtained by conducting laboratory tests such as direct tensile test, Brazilian splitting test and spall test. Concrete is a heterogeneous material with different components, but is conventionally assumed to be homogeneous, i.e., cement mortar only, in most previous experimental or numerical studies. The aggregates in concrete material are usually neglected owing to testing limitation and numerical simplification. It has been well acknowledged that neglecting coarse aggregates might not necessarily give accurate concrete dynamic material properties. In the present study, a 3D meso-scale model of concrete specimen with consideration of cement mortar and aggregates is developed to simulate spall tests and investigate the behaviour of concrete material under high strain rate. The commercial software LS-DYNA is used to perform the numerical simulations of spall tests. The mesh size sensitivity is examined by conducting mesh convergence tests. The reliability of the numerical model in simulating the spall tests is verified by comparing the numerical results with the experimental data from the literature. The influence of coarse aggregates on the experimental test results is studied. The wave attenuation in concrete specimen is analysed, and empirical equations are proposed for quick assessment of the test data to determine the true dynamic tensile strength of concrete material. The contributions of aggregates to dynamic strength in spall tests are quantified for modifying the test results based on mortar material in the literature

Effect of antibacterial agents on the surface hardness of a conventional glass-ionomer cement

In atraumatic restorative treatment (ART), caries removal with hand excavation instruments is not as efficient as that with rotary burs in eliminating bacteria under the glass ionomer cements (GICs). Thus, different antibacterial agents have been used in recent studies to enhance the antibacterial properties of the GICs, without jeopardizing their basic physical properties. OBJECTIVE: The objective of this study was to evaluate the effect of antibacterial agents on the surface hardness of a conventional GIC (Fuji IX) using Vickers microhardness [Vickers hardness number (VHN)] test. MATERIAL AND METHODS: Cetrimide (CT), cetylpyridinium chloride (CPC) and chlorhexidine (CHX) were added to the powder and benzalkonium chloride (BC) was added to the liquid of Fuji IX in concentrations of 1% and 2%, and served as the experimental groups. A control group containing no additive was also prepared. After the completion of setting reaction, VHN measurements were recorded at 1, 7, 15, 30, 60, and 90 days after storage in 37ºC distilled water. A one-way ANOVA was performed followed by a Dunnett t test and Tamhane T2 tests and also repeated measurements ANOVA was used for multiple comparisons in 95% confidence interval. RESULTS: VHN results showed significant differences between the control and the experimental groups at all time periods (p<0.05 for all). Significant differences were observed between all study periods for individual groups (p<0.05). After 7 days, VHNs were decreased in all experimental groups while they continued to increase in the control group. BC and CHX groups demonstrated the least whereas CT and CPC groups exhibited most adverse effect on the hardness of set cements. CONCLUSIONS: Despite the decreased microhardness values in all experimental groups compared to the controls after 7 up to 90 days, incorporating certain antibacterial agents into Fuji IX GIC showed tolerable microhardness alterations within the limitations of this in vitro study

A randomized clinical trial on the sealing of occlusal carious lesions: 3–4-year results

Abstract This randomized clinical trial aimed to assess the efficacy of sealing occlusal carious lesions in permanent teeth. The sample consisted of 54 occlusal carious lesions in permanent molars and premolars of 49 patients aged 8–43 years (median: 19 years). The inclusion criteria comprised the presence of a cavity with no access allowing biofilm control. The maximum depth of the lesion was the middle third of the dentin thickness, as assessed by bitewing radiography. The teeth were randomly assigned to sealant treatment (n = 28) or restorative treatment (n = 26). Clinical and radiographic examinations were performed after 1 year and after 3–4 years. The outcomes depended on the clinical performance of the sealant/restoration and the control of caries progression observed radiographically. Survival analysis was performed to assess success rates. Over the 3-4 years of monitoring, 2 sealants were totally lost, 1 needed repair, and 1 showed caries progression, totaling 4 failures in the sealant group. In the restoration group, 1 failure was observed (in need of repair). The success rates were 76% and 94% in the sealant and the restoration groups, respectively (p > 0.05). The sealing of occlusal carious lesions in permanent teeth succeeded in controlling caries over a 3–4-year period. However, sealed carious lesions require patient compliance in attending regular follow-ups to control the occurrence of clinical failures of the sealants

Amelogenesis imperfecta

Amelogenesis imperfecta (AI) represents a group of developmental conditions, genomic in origin, which affect the structure and clinical appearance of enamel of all or nearly all the teeth in a more or less equal manner, and which may be associated with morphologic or biochemical changes elsewhere in the body. The prevalence varies from 1:700 to 1:14,000, according to the populations studied. The enamel may be hypoplastic, hypomineralised or both and teeth affected may be discoloured, sensitive or prone to disintegration. AI exists in isolation or associated with other abnormalities in syndromes. It may show autosomal dominant, autosomal recessive, sex-linked and sporadic inheritance patterns. In families with an X-linked form it has been shown that the disorder may result from mutations in the amelogenin gene, AMELX. The enamelin gene, ENAM, is implicated in the pathogenesis of the dominant forms of AI. Autosomal recessive AI has been reported in families with known consanguinity. Diagnosis is based on the family history, pedigree plotting and meticulous clinical observation. Genetic diagnosis is presently only a research tool. The condition presents problems of socialisation, function and discomfort but may be managed by early vigorous intervention, both preventively and restoratively, with treatment continued throughout childhood and into adult life. In infancy, the primary dentition may be protected by the use of preformed metal crowns on posterior teeth. The longer-term care involves either crowns or, more frequently these days, adhesive, plastic restorations

Survival of atraumatic restorative treatment (ART) sealants and restorations: a meta-analysis

The purpose of this study is to perform a systematic investigation plus meta-analysis into survival of atraumatic restorative treatment (ART) sealants and restorations using high-viscosity glass ionomers and to compare the results with those from the 2005 ART meta-analysis. Until February 2010, four databases were searched. Two hundred four publications were found, and 66 reported on ART restorations or sealant survival. Based on five exclusion criteria, two independent reviewers selected the 29 publications that accounted for the meta-analysis. Confidence intervals (CI) and or standard errors were calculated and the heterogeneity variance of the survival rates was estimated. Location (school/clinic) was an independent variable. The survival rates of single-surface and multiple-surface ART restorations in primary teeth over the first 2 years were 93% (CI, 91–94%) and 62% (CI, 51–73%), respectively; for single-surface ART restorations in permanent teeth over the first 3 and 5 years it was 85% (CI, 77–91%) and 80% (CI, 76–83%), respectively and for multiple-surface ART restorations in permanent teeth over 1 year it was 86% (CI, 59–98%). The mean annual dentine lesion incidence rate, in pits and fissures previously sealed using ART, over the first 3 years was 1%. No location effect and no differences between the 2005 and 2010 survival rates of ART restorations and sealants were observed. The short-term survival rates of single-surface ART restorations in primary and permanent teeth, and the caries-preventive effect of ART sealants were high. Clinical relevance: ART can safely be used in single-surface cavities in both primary and permanent teeth. ART sealants have a high caries preventive effect