1,702 research outputs found
Constant-amplitude RC oscillator
Sinusoidal oscillator has a frequency determined by resistance-capacitance /RC/ values of two charge control devices and a constant-amplitude voltage independent of frequency and RC values. RC elements provide either voltage-control, resistance-control, or capacitance-control of the frequency
Recommended from our members
High-precision measurements of the co-polar correlation coefficient: non-Gaussian errors and retrieval of the dispersion parameter µ in rainfall
The co-polar correlation coefficient (ρhv) has many applications, including hydrometeor classification, ground clutter and melting layer identification, interpretation of ice microphysics and the retrieval of rain drop size distributions (DSDs). However, we currently lack the quantitative error estimates that are necessary if these applications are to be fully exploited. Previous error estimates of ρhv rely on knowledge of the unknown "true" ρhv and implicitly assume a Gaussian probability distribution function of ρhv samples. We show that frequency distributions of ρhv estimates are in fact highly negatively skewed. A new variable: L = -log10(1 - ρhv) is defined, which does have Gaussian error statistics, and a standard deviation depending only on the number of independent radar pulses. This is verified using observations of spherical drizzle drops, allowing, for the first time, the construction of rigorous confidence intervals in estimates of ρhv. In addition, we demonstrate how the imperfect co-location of the horizontal and vertical polarisation sample volumes may be accounted for.
The possibility of using L to estimate the dispersion parameter (µ) in the gamma drop size distribution is investigated. We find that including drop oscillations is essential for this application, otherwise there could be biases in retrieved µ of up to ~8. Preliminary results in rainfall are presented. In a convective rain case study, our estimates show µ to be substantially larger than 0 (an exponential DSD). In this particular rain event, rain rate would be overestimated by up to 50% if a simple exponential DSD is assumed
Laser Techniques in Photovoltaic Research
High-power laser pulses were used to replace the conventional high temperature furnace processing for the p-n junction formation step in high speed, low cost solar cell fabrication. Three different approaches to junction formation were tested: (1) laser annealing of ion-implanted Si in which laser radiation is used to remove the radiation damage and to recover the electrical activity in the implanted layer; (2) a process in which a thin film of dopant is first deposited on the substrate and then incorporated into the near-surface region by laser-induced diffusion; and (3) a process in which a heavily doped amorphous silicon layer is deposited on the Si substrate and epitaxially regrown from the melted substrate layer by laser radiation. All three methods were found to provide suitable candidates for high efficiency Si solar cells
Describing interruptions, multi-tasking and task-switching in the community pharmacy: A qualitative study in England
Background: There is growing evidence base around interruptions and distractions in the community pharmacy setting. There is also evidence to suggest these practices may be associated with dispensing errors. Up to date, qualitative research on this subject is limited.
Objective: To explore interruptions and distractions in the community setting; utilising an ethnographic approach to be able to provide a detailed description of the circumstances surrounding such practices.
Setting: Community pharmacies in England, July to October 2011.
Method: An ethnographic approach was taken. Non participant, unstructured observations were utilised to make records of pharmacists’ every activities. Case studies were formed by combining field notes with detailed information on pharmacists and their respective pharmacy businesses. Content analysis was undertaken both manually and electronically, utilising NVivo 10.
Results: Response rate was 12% (n=11). Over fifteen days, a total of 123 hours and 58 minutes of observations were recorded in 11 separate pharmacies of 11 individual pharmacists. The sample was evenly split by gender (female n=6; male n=5) and pharmacy ownership (independent n=5; multiple n=6). Employment statuses included employee pharmacists (n=6), owners (n=4) and a locum (n=1). Average period of registration as a pharmacist was 19 years (range 5-39 years). Average prescriptions busyness of pharmacies ranged from 2,600 – 24,000 items dispensed per month. Two key themes were: “Interruptions and task-switching” and “distractions and multi-tasking.” All observed pharmacists’ work was dominated by interruptions, task-switches, distractions and multi-tasking, often to manage a barrage of conflicting demands. These practices were observed to be part of a deep-rooted culture in the community setting. Directional work maps illustrated the extent and direction of task switching employed by pharmacists.
Conclusions: In this study pharmacists’ working practices were permeated by interruptions and multi-tasking. These practices are inefficient and potentially reduce patient safety in terms of dispensing accuracy
Chemical Kinetic Models for HCCI and Diesel Combustion
Predictive engine simulation models are needed to make rapid progress towards DOE's goals of increasing combustion engine efficiency and reducing pollutant emissions. These engine simulation models require chemical kinetic submodels to allow the prediction of the effect of fuel composition on engine performance and emissions. Chemical kinetic models for conventional and next-generation transportation fuels need to be developed so that engine simulation tools can predict fuel effects. The objectives are to: (1) Develop detailed chemical kinetic models for fuel components used in surrogate fuels for diesel and HCCI engines; (2) Develop surrogate fuel models to represent real fuels and model low temperature combustion strategies in HCCI and diesel engines that lead to low emissions and high efficiency; and (3) Characterize the role of fuel composition on low temperature combustion modes of advanced combustion engines
Trapped-ion probing of light-induced charging effects on dielectrics
We use a string of confined Ca ions to measure perturbations to a
trapping potential which are caused by light-induced charging of an
anti-reflection coated window and of insulating patches on the ion-trap
electrodes. The electric fields induced at the ions' position are characterised
as a function of distance to the dielectric, and as a function of the incident
optical power and wavelength. The measurement of the ion-string position is
sensitive to as few as elementary charges per on the
dielectric at distances of order millimetres, and perturbations are observed
for illumination with light of wavelengths as long as 729\,nm. This has
important implications for the future of miniaturised ion-trap experiments,
notably with regards to the choice of electrode material, and the optics that
must be integrated in the vicinity of the ion. The method presented can be
readily applied to the investigation of charging effects beyond the context of
ion trap experiments.Comment: 11 pages, 5 figure
Organic photovoltaics: The current challenges
Organic photovoltaics are remarkably close to reaching a landmark power conversion efficiency of 20%. Given the current urgent concerns regarding climate change, research into renewable energy solutions is crucially important. In this perspective article, we highlight several key aspects of organic photovoltaics, ranging from fundamental understanding to implementation, that need to be addressed to ensure the success of this promising technology. We cover the intriguing ability of some acceptors to undergo efficient charge photogeneration in the absence of an energetic driving force and the effects of the resulting state hybridization. We explore one of the primary loss mechanisms of organic photovoltaics - non-radiative voltage losses - and the influence of the energy gap law. Triplet states are becoming increasingly relevant owing to their presence in even the most efficient non-fullerene blends, and we assess their role as both a loss mechanism and a potential strategy to enhance efficiency. Finally, two ways in which the implementation of organic photovoltaics can be simplified are addressed. The standard bulk heterojunction architecture could be superseded by either single material photovoltaics or sequentially deposited heterojunctions, and the attributes of both are considered. While several important challenges still lie ahead for organic photovoltaics, their future is, indeed, bright
SEQATOMS: a web tool for identifying missing regions in PDB in sequence context.
doi:10.1093/nar/gkn23
Vacuum Polarization and the Electric Charge of the Positron
We show that higher-order vacuum polarization would contribute a measureable
net charge to atoms, if the charges of electrons and positrons do not balance
precisely. We obtain the limit for the sum of
the charges of electron and positron. This also constitutes a new bound on
certain violations of PCT invariance.Comment: 9 pages, 1 figure attached as PostScript file, DUKE-TH-92-38. Revised
versio
Recommended from our members
Chemical Kinetic Modeling of Hydrogen Combustion Limits
A detailed chemical kinetic model is used to explore the flammability and detonability of hydrogen mixtures. In the case of flammability, a detailed chemical kinetic mechanism for hydrogen is coupled to the CHEMKIN Premix code to compute premixed, laminar flame speeds. The detailed chemical kinetic model reproduces flame speeds in the literature over a range of equivalence ratios, pressures and reactant temperatures. A series of calculation were performed to assess the key parameters determining the flammability of hydrogen mixtures. Increased reactant temperature was found to greatly increase the flame speed and the flammability of the mixture. The effect of added diluents was assessed. Addition of water and carbon dioxide were found to reduce the flame speed and thus the flammability of a hydrogen mixture approximately equally well and much more than the addition of nitrogen. The detailed chemical kinetic model was used to explore the detonability of hydrogen mixtures. A Zeldovich-von Neumann-Doring (ZND) detonation model coupled with detailed chemical kinetics was used to model the detonation. The effectiveness on different diluents was assessed in reducing the detonability of a hydrogen mixture. Carbon dioxide was found to be most effective in reducing the detonability followed by water and nitrogen. The chemical action of chemical inhibitors on reducing the flammability of hydrogen mixtures is discussed. Bromine and organophosphorus inhibitors act through catalytic cycles that recombine H and OH radicals in the flame. The reduction in H and OH radicals reduces chain branching in the flame through the H + O{sub 2} = OH + O chain branching reaction. The reduction in chain branching and radical production reduces the flame speed and thus the flammability of the hydrogen mixture
- …