6,951 research outputs found
Physics of Proximity Josephson Sensor
We study the proximity Josephson sensor (PJS) in both bolometric and
calorimetric operation and optimize it for different temperature ranges between
25 mK and a few Kelvin. We investigate how the radiation power is absorbed in
the sensor and find that the irradiated sensor is typically in a weak
nonequilibrium state. We show in detail how the proximity of the
superconductors affects the device response: for example via changes in
electron-phonon coupling and out-of-equilibrium noise. In addition, we estimate
the applicability of graphene as the absorber material.Comment: 13 pages, 11 figures, submitted to Journal of Applied Physics, v2:
Addition of a new section discussing the radiation coupling to the device,
several minor change
Energy relaxation in graphene and its measurement with supercurrent
We study inelastic energy relaxation in graphene for low energies to find out
how electrons scatter with acoustic phonons and other electrons. By coupling
the graphene to superconductors, we create a strong dependence of the measured
signal, i.e.,\ critical Josephson current, on the electron population on
different energy states. Since the relative population of high- and low-energy
states is determined by the inelastic scattering processes, the critical
current becomes an effective probe for their strength. We argue that the
electron-electron interaction is the dominant relaxation method and, in our
model of two-dimensional electron-electron scattering, we find a scattering
time ps at T=500 mK, 1-2 orders of magnitude smaller than
predicted by theory.Comment: 10 pages, 13 figures submitted to Physical Review
Absorption of heat into a superconductor-normal metal-superconductor junction from a fluctuating environment
We study a diffusive superconductor-normal metal-superconductor junction in
an environment with intrinsic incoherent fluctuations which couple to the
junction through an electromagnetic field. When the temperature of the junction
differs from that of the environment, this coupling leads to an energy transfer
between the two systems, taking the junction out of equilibrium. We describe
this effect in the linear response regime and show that the change in the
supercurrent induced by this coupling leads to qualitative changes in the
current-phase relation and for a certain range of parameters, an increase in
the critical current of the junction. Besides normal metals, similar effects
can be expected also in other conducting weak links.Comment: 5 pages, 4 figures - supplementary information included: 3 pages, 1
figure; minor modifications to the text and Fig. 2, added Ref. 1
Developing LCA-based benchmarks for sustainable consumption - for and with users
This article presents the development process of a consumer-oriented, illustrative benchmarking tool enabling consumers to use the results of environmental life cycle assessment (LCA) to make informed decisions. Active and environmentally conscious consumers and environmental communicators were identified as key target groups for this type of information. A brochure presenting the benchmarking tool was developed as an participatory, iterative process involving consumer focus groups, stakeholder workshops and questionnaire-based feedback. In addition to learning what works and what does not, detailed suggestions on improved wording and figures were obtained, as well as a wealth of ideas for future applications
Nonequilibrium phenomena in multiple normal-superconducting tunnel heterostructures
Using the nonequilibrium theory of superconductivity with the tunnel
Hamiltonian, we consider a mesoscopic NISINISIN heterostructure, i.e., a
structure consisting of five intermittent normal-metal (N) and superconducting
(S) regions separated by insulating tunnel barriers (I). Applying the bias
voltage between the outer normal electrodes one can drive the central N island
very far from equilibrium. Depending on the resistance ratio of outer and inner
tunnel junctions, one can realize either effective electron cooling in the
central N island or create highly nonequilibrium energy distributions of
electrons in both S and N islands. These distributions exhibit multiple peaks
at a distance of integer multiples of the superconducting chemical potential.
In the latter case the superconducting gap in the S islands is strongly
suppressed as compared to its equilibrium value
Novel Data Acquisition System for Silicon Tracking Detectors
We have developed a novel data acquisition system for measuring tracking
parameters of a silicon detector in a particle beam. The system is based on a
commercial Analog-to-Digital VME module and a PC Linux based Data Acquisition
System. This DAQ is realized with C++ code using object-oriented techniques.
Track parameters for the beam particles were reconstructed using off-line
analysis code and automatic detector position alignment algorithm.
The new DAQ was used to test novel Czochralski type silicon detectors. The
important silicon detector parameters, including signal size distributions and
signal to noise distributions, were successfully extracted from the detector
under study. The efficiency of the detector was measured to be 95 %, the
resolution about 10 micrometers, and the signal to noise ratio about 10.Comment: Talk from the 2003 Computing in High Energy and Nuclear Physics
(CHEP03), La Jolla, Ca, USA, March 2003, 6 pages, LaTeX, 5 eps figures. PSN
TUGP00
Cellulose Fibre-Reinforced Biofoam for Structural Applications
Traditionally, polymers and macromolecular components used in the foam industry are mostly derived from petroleum. The current transition to a bio-economy creates demand for the use of more renewable feedstocks. Soybean oil is a vegetable oil, composed mainly of triglycerides, that is suitable material for foam production. In this study, acrylated epoxidized soybean oil and variable amounts of cellulose fibres were used in the production of bio-based foam. The developed macroporous bio-based architectures were characterised by several techniques, including porosity measurements, nanoindentation testing, scanning electron microscopy, and thermogravimetric analysis. It was found that the introduction of cellulose fibres during the foaming process was necessary to create the three-dimensional polymer foams. Using cellulose fibres has potential as a foam stabiliser because it obstructs the drainage of liquid from the film region in these gas-oil interfaces while simultaneously acting as a reinforcing agent in the polymer foam. The resulting foams possessed a porosity of approximately 56%, and the incorporation of cellulose fibres did not affect thermal behaviour. Scanning electron micrographs showed randomly oriented pores with irregular shapes and non-uniform pore size throughout the samples
Markers associated with genomic instability, immunogenicity and immune therapy responsiveness in Metaplastic carcinoma of the breast : Expression of gamma H2AX, pRPA2, P53, PD-L1 and tumor infiltrating lymphocytes in 76 cases
Peer reviewe
EP-1174: Local dose-effects of lung perfusion utilizing SPECT/CT after VMAT lung cancer radiotherapy
- …