7,282 research outputs found
Recommended from our members
Burn wound classification model using spatial frequency-domain imaging and machine learning.
Accurate assessment of burn severity is critical for wound care and the course of treatment. Delays in classification translate to delays in burn management, increasing the risk of scarring and infection. To this end, numerous imaging techniques have been used to examine tissue properties to infer burn severity. Spatial frequency-domain imaging (SFDI) has also been used to characterize burns based on the relationships between histologic observations and changes in tissue properties. Recently, machine learning has been used to classify burns by combining optical features from multispectral or hyperspectral imaging. Rather than employ models of light propagation to deduce tissue optical properties, we investigated the feasibility of using SFDI reflectance data at multiple spatial frequencies, with a support vector machine (SVM) classifier, to predict severity in a porcine model of graded burns. Calibrated reflectance images were collected using SFDI at eight wavelengths (471 to 851 nm) and five spatial frequencies (0 to 0.2  mm  -  1). Three models were built from subsets of this initial dataset. The first subset included data taken at all wavelengths with the planar (0  mm  -  1) spatial frequency, the second comprised data at all wavelengths and spatial frequencies, and the third used all collected data at values relative to unburned tissue. These data subsets were used to train and test cubic SVM models, and compared against burn status 28 days after injury. Model accuracy was established through leave-one-out cross-validation testing. The model based on images obtained at all wavelengths and spatial frequencies predicted burn severity at 24 h with 92.5% accuracy. The model composed of all values relative to unburned skin was 94.4% accurate. By comparison, the model that employed only planar illumination was 88.8% accurate. This investigation suggests that the combination of SFDI with machine learning has potential for accurately predicting burn severity
Importance of site of infection and antibiotic selection in the treatment of carbapenem-resistant Pseudomonas aeruginosa sepsis
ABSTRACT
In a retrospective analysis of 215 patients with carbapenem-resistant
Pseudomonas aeruginosa
sepsis, we observed a significantly higher risk of mortality associated with respiratory tract infection (risk ratio [RR], 1.20; 95% confidence interval [CI], 1.04 to 1.39;
P
= 0.010) and lower risk with urinary tract infection (RR, 0.80; 95% CI, 0.71 to 0.90;
P
= 0.004). Aminoglycoside monotherapy was associated with increased mortality, even after adjusting for confounders (adjusted RR, 1.72; 95% CI, 1.03 to 2.85;
P
= 0.037), consistent across multiple sites of infection.
</jats:p
Local and Global Distinguishability in Quantum Interferometry
A statistical distinguishability based on relative entropy characterises the
fitness of quantum states for phase estimation. This criterion is employed in
the context of a Mach-Zehnder interferometer and used to interpolate between
two regimes, of local and global phase distinguishability. The scaling of
distinguishability in these regimes with photon number is explored for various
quantum states. It emerges that local distinguishability is dependent on a
discrepancy between quantum and classical rotational energy. Our analysis
demonstrates that the Heisenberg limit is the true upper limit for local phase
sensitivity. Only the `NOON' states share this bound, but other states exhibit
a better trade-off when comparing local and global phase regimes.Comment: 4 pages, in submission, minor revision
The Cathode Strip Chamber Data Acquisition System for CMS
The Cathode Strip Chamber (CSC) [1] Data Acquisition (DAQ) system for the CMS [2] experiment at the LHC [3] will be described. The CSC system is large, consisting of 218K cathode channels and 183K anode channels. This leads to a substantial data rate of ~1.5GByte/s at LHC design luminosity (1034cm-2s-1) and the CMS first level trigger (L1A) rate of 100KHz. The DAQ system consists of three parts. The first part is on-chamber Cathode Front End Boards (CFEB)[4], which amplify, shape, store, and digitise chamber cathode signals, and Anode Front End Boards (AFEB)[5], which amplify, shape and discriminate chamber anode signals. The second part is the Peripheral Crate Data Acquisition Motherboards (DAQMB), which control the onchamber electronics and the readout of the chamber. The third part is the off-detector DAQ interface boards, which perform real time error checking, electronics reset requests and data concentration. It passes the resulting data to a CSC local DAQ farm, as well as CMS main DAQ [6]. All electronics in the system employ FPGAs allowing programmability. In addition, several high-speed serial interface technologies are employed
Quantifying the optical properties and chromophore concentrations of turbid media by chemometric analysis of hyperspectral diffuse reflectance data collected using a fourier interferometric imaging system
A non-contact Fourier transform interferometric imaging system was used to collect hyperspectral images of the steady-state diffuse reflectance from a point source in turbid media for the spectral range of 550-850 nm. Steady-state diffuse reflectance profiles were generated from the hyperspectral images, and partial least-squares (PLS) regression was performed on the diffuse reflectance profiles to quantify absorption (mu (alpha)) and reduced scattering (mu (s)') properties of turbid media. The feasibility of using PLS regression to predict optical properties was examined for two different sets of spatially-resolved diffuse reflectance data. One set of data was collected from 40 turbid phantoms, while the second set was generated by convolving Monte Carlo simulations with the instrument response of the imaging system. Study results show that PLS prediction of mu (alpha) and mu (s)' was accurate to within +/-8% and +/-5%, respectively, when the model was trained on turbid phantom data. Moreover, PLS prediction of optical properties was considerably faster and more efficient than direct least-squares fitting of spatially-resolved profiles. When the PLS model was trained on Monte Carlo simulated data and subsequently used to predict mu (alpha) and mu (s)' from the diffuse reflectance of turbid phantom, the percent accuracies degraded to +/-12% and +/-5%, respectively. These accuracy values are applicable to homogenous, semi-infinite turbid phantoms with optical property ranges comparable to tissues
Estimation of toxicity of chemical mixtures through modeling of chemical interactions.
The Agency for Toxic Substances and Disease Registry (ATSDR), in collaboration with the Dutch Organization for Applied Scientific Research (TNO) Nutrition and Food Research Institute, is conducting studies to evaluate the role of chemical interactions in the expression of toxicity from low-level exposure to combinations of chemicals. The goal of this collaborative effort is to use a weight-of-evidence (WOE) approach to estimate joint toxicity of some simple chemical mixtures and to compare the estimations with test results from animal toxicity studies. The WOE approach uses individual chemical dose-response assessments and algorithms that incorporate various assumptions regarding potential chemical interactions. Qualitative evaluations were prepared for binary combinations of chemicals for the effect of butyl hydroxyanisole on di(2-ethylhexyl)phthalate, the effect of stannous chloride on Cd chloride (CdCl2), and the effect of CdCl2 on loperamide. Analyses of these evaluations and their comparison with the conclusions of laboratory animal experiments indicate that the WOE approach can be used to estimate qualitatively the joint toxicity of such simple mixtures. To further test the utility of the WOE approach, qualitative and semiquantitative evaluations were prepared for two chemical mixtures--one with similarly acting halogenated aliphatics (trichloroethylene, tetrachloroethylene, hexachloro-1,3-butadiene[HCBD], and 1,1,2-trichloro-3,3,3-trifluoropropene [TCTFP]) and the other with dissimilarly acting nephrotoxic components (mercuric chloride, lysinolalanine, D-limonene, and HCBD). These two sets of data were used to estimate the overall toxicities of the mixtures using the WOE algorithm for the mixture. The comparison of the results of the estimated toxicity with experimentally determined toxicity of the mixture of similarly acting nephrotoxicants demonstrated that the WOE approach correctly adjusted for the observed interactions in experimental animal studies. However, this was not true for the mixture of dissimilarly acting nephrotoxicants. This could be attributed to the fact that WOE evaluations are based on dose additivity that postulates that all chemicals in a given mixture act in the same way--by the same mechanism--and differ only in their potencies. In these cases the WOE approach evaluations, based on consideration of common mechanisms for simple chemical mixtures, can lead to better estimates of joint toxicity of chemical mixtures than the default assumption of dose additivity. The results also show that the WOE evaluations should be target-organ specific because none of the models tested could approximate the observed responses in organs other than the target organs in the laboratory animal studies
The merger of vertically offset quasi-geostrophic vortices
We examine the critical merging distance between two equal-volume, equal-potential-vorticity quasi-geostrophic vortices. We focus on how this distance depends on the vertical offset between the two vortices, each having a unit mean height-to-width aspect ratio. The vertical direction is special in the quasi-geostrophic model (used to capture the leading-order dynamical features of stably stratified and rapidly rotating geophysical flows) since vertical advection is absent. Nevertheless vortex merger may still occur by horizontal advection. In this paper, we first investigate the equilibrium states for the two vortices as a function of their vertical and horizontal separation. We examine their basic properties together with their linear stability. These findings are next compared to numerical simulations of the nonlinear evolution of two spheres of potential vorticity. Three different regimes of interaction are identified, depending on the vertical offset. For a small offset, the interaction differs little from the case when the two vortices are horizontally aligned. On the other hand, when the vertical offset is comparable to the mean vortex radius, strong interaction occurs for greater horizontal gaps than in the horizontally aligned case, and therefore at significantly greater full separation distances. This perhaps surprising result is consistent with the linear stability analysis and appears to be a consequence of the anisotropy of the quasi-geostrophic equations. Finally, for large vertical offsets, vortex merger results in the formation of a metastable tilted dumbbell vortex.Publisher PDFPeer reviewe
Results from the First Science Run of the ZEPLIN-III Dark Matter Search Experiment
The ZEPLIN-III experiment in the Palmer Underground Laboratory at Boulby uses
a 12kg two-phase xenon time projection chamber to search for the weakly
interacting massive particles (WIMPs) that may account for the dark matter of
our Galaxy. The detector measures both scintillation and ionisation produced by
radiation interacting in the liquid to differentiate between the nuclear
recoils expected from WIMPs and the electron recoil background signals down to
~10keV nuclear recoil energy. An analysis of 847kg.days of data acquired
between February 27th 2008 and May 20th 2008 has excluded a WIMP-nucleon
elastic scattering spin-independent cross-section above 8.1x10(-8)pb at
55GeV/c2 with a 90% confidence limit. It has also demonstrated that the
two-phase xenon technique is capable of better discrimination between electron
and nuclear recoils at low-energy than previously achieved by other xenon-based
experiments.Comment: 12 pages, 17 figure
Experimental Constraints on the Neutrino Oscillations and a Simple Model of Three Flavour Mixing
A simple model of the neutrino mixing is considered, which contains only one
right-handed neutrino field, coupled via the mass term to the three usual
left-handed fields. This is a simplest model that allows for three-flavour
neutrino oscillations. The existing experimental limits on the neutrino
oscillations are used to obtain constraints on the two free mixing parameters
of the model. A specific sum rule relating the oscillation probabilities of
different flavours is derived.Comment: 10 pages, 3 figures in post script, Latex, IFT 2/9
- …