Virulence Potential of Staphylococcus aureus Strains Isolated From Diabetic Foot Ulcers: A new paradigm

OBJECTIVE—The purpose of this study was to assess the virulence potential of Staphylococcus aureus strains isolated from diabetic foot ulcers and to discriminate noninfected from infected ulcers

Friction in surface micromachined microengines

Understanding the frictional properties of advanced Micro-Electro- Mechanical Systems (MEMS) is essential in order to develop optimized designs and fabrication processes, as well as to qualify devices for commercial applications. We develop and demonstrate a method to experimentally measure the forces associated with sliding friction of devices rotating on a hub. The method is demonstrated on the rotating output gear of the microengine recently developed at Sandia National Laboratories. In-situ measurements of an engine running at 18300 rpm give a coefficient of friction of 0.5 for radial (normal) forces less than 4 {mu}N. For larger forces the effective coefficient of friction abruptly increases, suggesting a fundamental change in the basic nature of the interaction between the gear and hub. The experimental approach we have developed to measure the frictional forces associated with the microengine is generically applicable to other MEMS devices

Performance tradeoffs for a surface micromachined microengine

An electromechanical model of Sandia`s microengine is developed and applied to quantify critical performance tradeoffs. This is done by determining how forces impact the mechanical response of the engine to different electrical drive signals. To validate the theoretical results, model-based drive signals are used to operate actual engines, where controlled operation is achieved for the following cases: (1) spring forces are dominant, (2) frictional forces are dominant, (3) linear inertial forces are dominant, (4) viscous damping forces are dominant, and (5) inertial load forces are dominant. Significant improvements in engine performance are experimentally demonstrated in the following areas: positional control, start/stop endurance, constant speed endurance, friction load reduction, and rapid actuation of inertial loads

Psychotic features, particularly mood incongruence, as a hallmark of severity of bipolar I disorder.

The occurrence of psychotic features within mood episodes in patients with bipolar I disorder (BD I) has been associated in some studies with a more severe clinical and socio-professional profile. In contrast, other studies establishing the associations of psychotic features in BD I, and in particular of mood-congruent (MC) and mood-incongruent (MI) features, with clinical characteristics have yielded contradictory results. However, many pre-existing studies have been affected by serious methodological limitations. Using a sample of thoroughly assessed patients with BD I our aims were to: (1) establish the proportion of those with MI and MC features, and (2) compare BD I patients with and without psychotic features as well as those with MI to those with MC features on a wide array of socio-demographic and clinical characteristics including course, psychiatric comorbidity and treatment. A sample of 162 treated patients with BD I (60.5% female, mean age = 41.4 (s.d: 10.2) years) was recruited within a large family study of mood disorders. Clinical, course and treatment characteristics relied on information elicited through direct diagnostic interviews, family history reports and medical records. (1) A total of 96 patients (59.3%) had experienced psychotic features over their lifetime. Among them, 44.8% revealed MI features at least once in their lives. (2) Patients with psychotic features were much less likely to be professionally active, revealed alcohol abuse more frequently and used health care, particularly inpatient treatment, more frequently than those without psychotic features. Within patients with psychotic symptoms, those with MI features showed more clinical severity in terms of a higher likelihood of reporting hallucinations, suicidal attempts and comorbid cannabis dependence. Our data provide additional support for both the distinction between BD-I with and without psychotic features as well as the distinction between MI and MC psychotic features. The more severe course of patients with psychotic features, and particularly those with MI psychotic features, highlights the need for thorough psychopathological evaluations to assess the presence of these symptoms to install appropriate treatment

On Passion and Sports Fans:A Look at Football

The purpose of the present research was to test the applicability of the Dualistic Model of Passion (Vallerand et al., 2003) to being a sport (football) fan. The model posits that passion is a strong inclination toward an activity that individuals like (or even love), that they value, and in which they invest time and energy. Furthermore, two types of passion are proposed: harmonious and obsessive passion. While obsessive passion entails an uncontrollable urge to engage in the passionate activity, harmonious passion entails a sense of volition while engaging in the activity. Finally, the model posits that harmonious passion leads to more adaptive outcomes than obsessive passion. Three studies provided support for this dualistic conceptualization of passion. Study 1 showed that harmonious passion was positively associated with adaptive behaviours (e.g., celebrate the team’s victory), while obsessive passion was rather positively associated with maladaptive behaviours (e.g., to risk losing one’s employment to go to the team’s game). Study 2 used a short Passion Scale and showed that harmonious passion was positively related to the positive affective life of fans during the 2006 FIFA World Cup, psychological health (self-esteem and life satisfaction), and public displays of adaptive behaviours (e.g., celebrating one’s team victory in the streets), while obsessive passion was predictive of maladaptive affective life (e.g., hating opposing team’s fans) and behaviours (e.g., mocking the opposing team’s fans). Finally, Study 3 examined the role of obsessive passion as a predictor of partner’s conflict that in turn undermined partner’s relationship satisfaction. Overall, the present results provided support for the Dualistic Model of Passion. The conceptual and applied implications of the findings are discussed

Between supply and demand: the limits to participatory development in South Africa

Much of the focus in the literature on participatory development has been on the demand side and on the extent to which citizens succeed in pressuring the state to deliver basic services. Less attention has been focused on the supply side of participatory development, namely on how state institutions give effect to development policies. Post-Apartheid South Africa is replete with policies and legislation supporting participatory processes and yet in practice this has seldom lived up to the ideals espoused. This article examines the delivery of public housing in poor communities in three municipalities in South Africa and argues that there is a mismatch between how the formulators of policy understand participation and how it is interpreted by beneficiary communities and local officials. It concludes that considerably more attention needs to be focused on why officials fail to translate national policies into action if participatory democracy is to attain any legitimacy in the population at large.Web of Scienc

Reproducibility of Ba/Ca variations recorded by northeast Pacific bamboo corals

Author Posting. © American Geophysical Union, 2017. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Paleoceanography 32 (2017): 966–979, doi:10.1002/2017PA003178.Trace elemental ratios preserved in the calcitic skeleton of bamboo corals have been shown to serve as archives of past ocean conditions. The concentration of dissolved barium (BaSW), a bioactive nutrientlike element, is linked to biogeochemical processes such as the cycling and export of nutrients. Recent work has calibrated bamboo coral Ba/Ca, a new BaSW proxy, using corals spanning the oxygen minimum zone beneath the California Current System. However, it was previously unclear whether Ba/Cacoral records were internally reproducible. Here we investigate the accuracy of using laser ablation inductively coupled plasma mass spectrometry for Ba/Cacoral analyses and test the internal reproducibility of Ba/Ca among replicate radial transects in the calcite of nine bamboo corals collected from the Gulf of Alaska (643–720 m) and the California margin (870–2054 m). Data from replicate Ba/Ca transects were aligned using visible growth bands to account for nonconcentric growth; smoothed data were reproducible within ~4% for eight corals (n = 3 radii/coral). This intracoral reproducibility further validates using bamboo coral Ba/Ca for BaSW reconstructions. Sections of the Ba/Ca records that were potentially influenced by noncarbonate bound Ba phases occurred in regions where elevated Mg/Ca or Pb/Ca and coincided with anomalous regions on photomicrographs. After removing these regions of the records, increased Ba/Cacoral variability was evident in corals between ~800 and 1500 m. These findings support additional proxy validation to understand BaSW variability on interannual timescales, which could lead to new insights into deep sea biogeochemistry over the past several centuries.NSF Grant Number: OCE-1420984; NOAA/OE Grant Number: NA16RP2637; MIT-WHOI Joint Program; American Geophysical Union Travel Grant; UC Davis President's Undergraduate Fellowship; Bowdoin College Gibbons Summer Research Fellowship2018-03-1

PMF the front end electronic for the ALFA detector

International audienceThe PMF (Photo Multiplier Front end) is the front end electronics designed for the ATLAS luminometer ALFA (Absolute Luminosity For ATLAS) made of 20 staggered U-V scintillating fiber layers inserted in Roman Pots (eight in total). Each of these plans is made of 64 fibers. The PMF consists of a 64 channels photomultiplier (MAPMT) and a very compact stack of three different PCBs (3x3 cm2), mounted directly on the back and in the shadow of the MAPMT: a board which brings the high voltage to the MAPMT, an intermediate board used to send the signals to connectors located on the edge and, finally, a board with the readout chip MAROC (Multi Anode Read Out Chip), directly bonded on the PCB, on one side and a FPGA on the other. The 64 inputs MAROC ASIC allows correcting for the gain spread of MAPMT channels thanks to a 6 bits variable gain preamplifier. For each channel the signal is shaped (fast shaper, 15ns) and discriminated to produce a trigger output. A multiplexed charge output is also produced both in analog and digital thanks to a Wilkinson ADC. The main requirements are the following: 100 % trigger efficiency for a signal greater than 1/3 of a photoelectron, a charge measurement up to 30 photoelectrons with a linearity of 2 % or better and a cross talk of 1 % or less. The performances of the second version of MAROC were checked successfully during the year 2007 at LAL-Orsay. A nice dispersion of the trigger output (± 5 fC) was, in particular, observed. A sample of PMFs was produced during autumn 2007 as a prototype. Laboratory tests were performed both at LAL and CERN respectively on the third PCB (the one with MAROC) and on a full PMF equipped with a MAPMT illuminated by a LED. They were carried out using dedicated test board and acquisition software and have allowed the approval of the design and the green light for the final production and integration with the detector. Beam tests of a complete Roman Pot, equipped with 23 PMFs, will take place during summer 2008 for two periods and will conclude the test phase and mark the beginning of the final production