Development and characterization of sugar palm starch and poly(lactic acid) bilayer films

The development and characterization of environmentally friendly bilayer films from sugar palm starch (SPS) and poly(lactic acid) (PLA) were conducted in this study. The SPS-PLA bilayer films and their individual components were characterized for their physical, mechanical, thermal and water barrier properties. Addition of 50% PLA layer onto 50% SPS layer (SPS50-PLA50) increased the tensile strength of neat SPS film from 7.74 to 13.65MPa but reduced their elongation at break from 46.66 to 15.53%. The incorporation of PLA layer significantly reduced the water vapor permeability as well as the water uptake and solubility of bilayer films which was attributed to the hydrophobic characteristic of the PLA layer. Furthermore, scanning electron microscopy (SEM) image of SPS50-PLA50 revealed lack of strong interfacial adhesion between the SPS and PLA. Overall, the incorporation of PLA layer onto SPS films enhances the suitability of SPS based films for food packaging

Low concentration atropine and myopia: a narrative review of the evidence for United Kingdom based practitioners

The prevalence of myopia is increasing across the world. Controlling myopia progression would be beneficial to reduce adverse outcomes such as retinal detachment and myopic maculopathy which are associated with increased axial length. Pharmacological control of myopia progression with atropine has been investigated since the 19th century and the benefits of slowing myopia progression are considered against the side-effects of near blur and photophobia. More recently, randomised trials have focused on determining the optimum concentration of atropine leading to low-concentration atropine being used to manage myopia progression by practitioners across the world. Currently, in the United Kingdom, there is no licensed pharmacological intervention for myopia management. The aim of this review is to interpret the available data to inform clinical practice. We conducted a narrative review of the literature and identified peer-reviewed randomised controlled trials using the search terms 'myopia' and 'atropine', limited to the English language. We identified two key studies, which were the Atropine in the Treatment Of Myopia (ATOM) and Low-concentration Atropine for Myopia Progression (LAMP). Further studies were identified using the above search terms and the references from the identified literature. Atropine 0.01% has a modest effect on controlling axial length progression. Atropine 0.05% appears to be superior to atropine 0.01% in managing myopia progression. There is a dose-dependent rebound effect when treatment is stopped. Atropine is a well-tolerated, safe, and effective intervention. Treatment would be needed for several years and into adolescence, until axial length progression is stable. [Abstract copyright: © 2023. The Author(s), under exclusive licence to The Royal College of Ophthalmologists.

Instrumentation for aerodynamic and thermal performance tests of a turbine stage in short-duration facilities

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2002.Includes bibliographical references (p. 149-151).by Jameel J. Janjua.S.M

Preparation and properties of cellulose / tamarind nut powder green composites

Using biopolymer cellulose as the matrix and tamarind nut powder (TNP) obtained from agricultural waste of tamarind nuts as the filler, the green composites were made. Cellulose was dissolved in environmental friendly solvent of aq. 8 wt. % Lithium hydroxide and 15 wt. % urea which was precooled to −12 ° C. To the cellulose solutions, TNP was added in 5 wt. % to 25 wt. % of cellulose separately. Each solution was evenly spread on glass plates and the wet composites were prepared by regeneration method using ethyl alcohol coagulation bath. The wet films were dried in air at room temperature. The dried composite films were characterized by FTIR spectroscopy, X-ray diffraction, thermogravimetric analysis and also tested for their tensile properties. The tensile strength and the % elongation at break of the composites were higher than those of the matrix and increased with TNP content. While the matrix had a tensile strength of 111.8 MPa, the cellulose/TNP composite loaded with 25 wt.% TNP possessed a tensile strength of 125.4 MPa (12% increase). Though the thermal stability of the composites was lower than cellulose matrix, all the composites were stable up to a temperature of 350 °C

Automated quantification of non-calcified coronary plaques in cardiac CT angiographic imagery

The high mortality rate associated with coronary heart disease (CHD) has driven intensive research in cardiac image analysis. The advent of computed tomography angiography (CTA) has turned non-invasive diagnosis of cardiovascular anomalies into reality as calcified coronary plaques can be easily identified due to high intensity values. However, detection and quantification of the non-calcified plaques in CTA is still a challenging problem because of their lower intensity values, which are often similar to the nearby blood and muscle tissues. In this work, we propose Bayesian posterior based model for precise quantification of the non-calcified plaques in CTA imagery. The only indicator of non-calcified plaques in CTA is relatively lower intensity. Hence, we exploited intensity variations to discriminate voxels into lumen and plaque classes. Based on the normal coronary segments, we computed the vessel-wall thickness in first step. In the subsequent step, we removed vessel wall from the segmented tree and employed Gaussian Mixture Model to compute optimal distribution parameters. In the final step, distribution parameters were employed in Bayesian posterior model to classify voxels into lumen or plaque. A total of 18 CTA volumes were analyzed in this work using two different approaches. According to the experimental results, mean Jaccard overlap is around 88% with respect to the manual expert. In terms of sensitivity, specificity and accuracy, the proposed method achieves 84.13%, 79.15% and 82.02% success, respectively. Conclusion: According to the experimental results, it is shown that the proposed plaque quantification method achieves accuracy equivalent to human experts

Mechanical and thermal properties of montmorillonite-reinforced polypropylene/rice husk hybrid nanocomposites

© 2019 by the authors. In recent years, there has been considerable interest in the use of natural fibers as potential reinforcing fillers in polymer composites despite their hydrophilicity, which limits their widespread commercial application. The present study explored the fabrication of nanocomposites by melt mixing, using an internal mixer followed by a compression molding technique, and incorporating rice husk (RH) as a renewable natural filler, montmorillonite (MMT) nanoclay as water-resistant reinforcing nanoparticles, and polypropylene-grafted maleic anhydride (PP-g-MAH) as a compatibilizing agent. To correlate the effect ofMMTdelamination andMMT/RHdispersion in the composites, the mechanical and thermal properties of the composites were studied. XRD analysis revealed delamination of MMT platelets due to an increase in their interlayer spacing, and SEM micrographs indicated improved dispersion of the filler(s) from the use of compatibilizers. The mechanical properties were improved by the incorporation of MMT into the PP/RH system and the reinforcing effect was remarkable as a result of the use of compatibilizing agent. Prolonged water exposure of the prepared samples decreased their tensile and flexural properties. Interestingly, the maximum decrease was observed for PP/RH composites and the minimum was for MMT-reinforced and PP-g-MAH-compatibilized PP/RH composites. DSC results revealed an increase in crystallinity with the addition of filler(s), while the melting and crystallization temperatures remained unaltered. TGA revealed that MMT addition and its delamination in the composite systems improved the thermal stability of the developed nanocomposites. Overall, we conclude that MMT nanoclay is an effective water-resistant reinforcing nanoparticle that enhances the durability, mechanical properties, and thermal stability of composites

Isolation and characterization of microcrystalline cellulose from oil palm biomass residue.

In this work, we successfully isolated microcrystalline cellulose (MCC) from oil palm empty fruit bunch (OPEFB) fiber-total chlorine free (TCF) pulp using acid hydrolysis method. TCF pulp bleaching carried out using an oxygen–ozone–hydrogen peroxide bleaching sequence. Fourier transform infrared (FT-IR) spectroscopy indicates that acid hydrolysis does not affect the chemical structure of the cellulosic fragments. The morphology of the hydrolyzed MCC was investigated using scanning electron microscopy (SEM), showing a compact structure and a rough surface. Furthermore, atomic force microscopy (AFM) image of the surface indicates the presence of spherical features. X-ray diffraction (XRD) shows that the MCC produced is a cellulose-I polymorph, with 87% crystallinity. The MCC obtained from OPEFB-pulp is shown to have a good thermal stability. The potential for a range of applications such as green nano biocomposites reinforced with this form of MCC and pharmaceutical tableting material is discussed

Characteristics of thermoplastic sugar palm starch/agar blend: thermal, tensile, and physical properties

The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10–40 wt%. The thermoplastics were melt-mixed and then hot pressed at 140◦C for 10 min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young’s modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30 wt% agar content have the highest tensile strength. Higher content of agar (40 wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc

Effect of treatments on the physical and morphological properties of SPF/phenolic composites

This study aims at evaluating the physical properties and effects of fiber treatments of natural fiber reinforced polymer composite’s friction applications. Sugar palm fibers (SPFs) were used as fillers (≤ 150 µm) with phenolic resin to fabricate the composites by the hot press technique. The loading of SPFs varied from 0 to 40 vol.% with an interval of 10 vol.% in phenolic composites. The fibers were treated with sea water for 30 days, and with 0.5 M of alkaline solution for 4 hrs. Rockwell hardness, density, voids content, water/oil absorption, and moisture content were studied. Scanning electron microscopy (SEM) was used to investigate the morphology and interfacial bonding of the fiber-matrix in composites. With an increase in the SPF loading in the composites, the results indicated a decline in Rockwell hardness, an increase in water/oil absorption, and density. It was also observed that higher the density of the composites, lower was the voids content. In terms of physical properties, sea water treatment showed better improvement than alkaline treatment. The outcome of this research indicated that SPFs can be effectively used in reinforcing polymer composites, such as friction composites