Preliminary tests of an advanced high-temperature combustion system

A combustion system has been developed to operate efficiently and with good durability at inlet pressures to 4.05 MPa (40 atm), inlet air temperatures to 900 K, and exhaust gas temperatures to 2480 K. A preliminary investigation of this system was conducted at inlet pressures to 0.94 MPa (9 atm), a nominal inlet air temperature of 560 K, and exhaust gas temperatures to 2135 K. A maximum combustion efficiency of 98.5 percent was attained at a fuel-air ratio of 0.033; the combustion efficiency decreased to about 90 percent as the fuel-air ratio was increased to 0.058. An average liner metal temperature of 915 K, 355 kelvins greater than the nominal inlet air temperature, was reached with an average exhaust gas temperature of 2090 K. The maximum local metal temperature at this condition was about 565 kelvins above the nominal inlet air temperature and decreased to 505 kelvins above with increasing combustor pressure. Tests to determine the isothermal total pressure loss of the combustor showed a liner loss of 1.1 percent and a system loss of 6.5 percent

Contemporary medical television and crisis in the NHS

This article maps the terrain of contemporary UK medical television, paying particular attention to Call the Midwife as its centrepiece, and situating it in contextual relation to the current crisis in the NHS. It provides a historical overview of UK and US medical television, illustrating how medical television today has been shaped by noteworthy antecedents. It argues that crisis rhetoric surrounding healthcare leading up to the passing of the Health and Social Care Act 2012 has been accompanied by a renaissance in medical television. And that issues, strands and clusters have emerged in forms, registers and modes with noticeable regularity, especially around the value of affective labour, the cultural politics of nostalgia and the neoliberalisation of healthcare

Readout of solid-state charge qubits using a single-electron pump

A major difficulty in realizing a solid-state quantum computer is the reliable measurement of the states of the quantum registers. In this paper, we propose an efficient readout scheme making use of the resonant tunneling of a ballistic electron produced by a single electron pump. We treat the measurement interaction in detail by modeling the full spatial configuration, and show that for pumped electrons with suitably chosen energy the transmission coefficient is very sensitive to the qubit state. We further show that by using a short sequence of pumping events, coupled with a simple feedback control procedure, the qubit can be measured with high accuracy.Comment: 5 pages, revtex4, 4 eps figures. v2: published versio

Investigation of a single-photon source based on quantum interference

We report on an experimental investigation of a single-photon source based on a quantum interference effect first demonstrated by Koashi, Matsuoka, and Hirano [Phys. Rev. A 53, 3621 (1996)]. For certain types of measurement-based quantum information processing applications this technique may be useful as a high rate, but random, source of single photons.Comment: Submitted to the New J. Phys. Focus Issue on "Measurement-based quantum information processing

Acoustic Emission from a Growing Crack

Separation of crack growth signals is of fundamental importance for detecting, locating, and determining the significance of an internal flaw. The difficulty associated with modeling acoustic emission is not only in providing an accurate representation of the source mechanism, but also in determining the effect of the specimen geometry and the sensor on the acoustic emission signal

Optical Properties of Pentacene and Perfluoropentacene Thin Films

The optical properties of pentacene (PEN) and perfluoropentacene(PFP) thin films on various SiO2 substrates were studied using variable angle spectroscopic ellipsometry. Structural characterization was performed using X-ray reflectivity and atomic force microscopy. A uniaxial model with the optic axis normal to the sample surface was used to analyze the ellipsometry data. A Strong optical anisotropy was observed and enabled the direction of the transition dipole of the absorption bands to be determined. Furthermore, comparison of the optical constants of PEN and PFP thin films with the absorption spectra of the monomers in solution shows significant changes due to the crystalline environment. Relative to the monomer spectrum the HOMO-LUMO transition observed in PEN (PFP) thin film is reduced by 210 meV (280 meV). Surprisingly, a second absorption band in the PFP thin film shows a slight blueshift (40 meV) compared to the spectrum of the monomer with its transition dipole perpendicular to that of the first absorption band.Comment: 6 pages, 6 figures, submitted to J. Chem. Phy

A new limit on the permanent electric dipole moment of ^{199}Hg

We present the first results of a new search for a permanent electric dipole moment of the ^{199}Hg atom using a UV laser. Our measurements give d(Hg)= - (1.06 +/- 0.49 +/- 0.40) 10^{-28} e cm. We interpret the result as an upper limit |d(Hg)| < 2.1 10^{-28} e cm (95% C.L.), which sets new constraints on theta_{QCD}, chromo-EDMs of the quarks, and CP violation in Supersymmetric models.Comment: 4 pages, 4 figures, submitted to Phys. Rev. Let

Single shot parameter estimation via continuous quantum measurement

We present filtering equations for single shot parameter estimation using continuous quantum measurement. By embedding parameter estimation in the standard quantum filtering formalism, we derive the optimal Bayesian filter for cases when the parameter takes on a finite range of values. Leveraging recent convergence results [van Handel, arXiv:0709.2216 (2008)], we give a condition which determines the asymptotic convergence of the estimator. For cases when the parameter is continuous valued, we develop quantum particle filters as a practical computational method for quantum parameter estimation.Comment: 9 pages, 5 image

Affective iconic words benefit from additional sound–meaning integration in the left amygdala

Recent studies have shown that a similarity between sound and meaning of a word (i.e., iconicity) can help more readily access the meaning of that word, but the neural mechanisms underlying this beneficial role of iconicity in semantic processing remain largely unknown. In an fMRI study, we focused on the affective domain and examined whether affective iconic words (e.g., high arousal in both sound and meaning) activate additional brain regions that integrate emotional information from different domains (i.e., sound and meaning). In line with our hypothesis, affective iconic words, compared to their non‐iconic counterparts, elicited additional BOLD responses in the left amygdala known for its role in multimodal representation of emotions. Functional connectivity analyses revealed that the observed amygdalar activity was modulated by an interaction of iconic condition and activations in two hubs representative for processing sound (left superior temporal gyrus) and meaning (left inferior frontal gyrus) of words. These results provide a neural explanation for the facilitative role of iconicity in language processing and indicate that language users are sensitive to the interaction between sound and meaning aspect of words, suggesting the existence of iconicity as a general property of human language