Raman spectroscopy of iodine-doped double-walled carbon nanotubes

We present a Raman spectroscopy study of iodine-intercalated (p-type-doped) double-walled carbon nanotubes. Double-walled carbon nanotubes (DWCNTs) are synthesized by catalytic chemical vapor deposition and characterized by Raman spectroscopy. The assignment of the radial breathing modes and the tangential modes of pristine DWCNTs is done in the framework of the bond polarization theory, using the spectral moment method. The changes in the Raman spectrum upon iodine doping are analyzed. Poly-iodine anions are identi- fied, and the Raman spectra reveal that the charge transfer between iodine and DWCNTs only involves the outer tubes

Raman G and D band in strongly photoexcited carbon nanotubes

We observe clear differences in the spectral shift of the Raman D and G bands when heating double wall carbon nanotubes through intense photon irradiation and by varying the temperature in a thermostat. These spectral differences are attributed to modifications of the defect induced double-resonance Raman process, and are consistent with Stokes–anti-Stokes anomalies observed for single and double wall carbon nanotubes, not present in graphite. We find that the Raman intensity for double wall carbon nanotubes increases superlinearly in the red spectral region and sublinearly in the UV spectral region

Writing Electronic Devices on Paper with Carbon Nanotube Ink

The normal paper used in any printer is among the cheapest flexible organic materials that exist. We demonstrate that we can print on paper high-frequency circuits tunable with an applied dc voltage. This is possible with the help of an ink containing functionalized carbon nanotubes and water. After the water is evaporated from the paper, the nanotubes remain steadily imprinted on paper, showing a semiconducting behaviour and tunable electrical properties

Raman G band in double-wall carbon nanotubes combining p doping and high pressure

We use sulfuric acid as pressure medium to extrapolate the G-band position of the inner and outer tubes of double-wall carbon nanotubes. Keeping the G-band position of the inner and outer tubes constant, we can determine the fraction of double-wall and single-wall tubes in samples containing a mixture of the two. A-band-related electronic interwall interaction at 1560 cm−1 is observed, which is associated with the outer tube walls. This band is observed to shift with pressure at the same rate as the G band of outer tubes and is not suppressed with chemical doping. Differences in the interwall interaction is discussed for double-wall carbon nanotubes grown by the catalytic chemical-vapor method and double-wall carbon nanotubes obtained through transformation of peapods

Pressure dependence of Raman modes in double wall carbon nanotubes filled with α-Fe.

The preparation of highly anisotropic one-dimensional (1D) structures confined into carbon nanotubes (CNTs) in general is a key objective in CNTs research. In this work, the capillary effect was used to fill double wall carbon nanotubes with iron. The samples are characterized by Mössbauer and Raman spectroscopy, transmission electron microscopy, scanning area electron diffraction, and magnetization. In order to investigate their structural stability and compare it with that of single wall carbon nanotubes (SWNTs), elucidating the differences induced by the inner-outer tube interaction, unpolarized Raman spectra of tangential modes of double wall carbon nanotubes (DWNTs) filled with 1D nanocrystallin α-Fe excited with 514 nm were studied at room temperature and elevated pressure. Up to 16 GPa we find a pressure coefficient for the internal tube of 4.3 cm−1 GPa−1 and for the external tube of 5.5 cm−1 GPa−1. In addition, the tangential band of the external and internal tubes broadens and decreases in amplitude. All findings lead to the conclusion that the outer tube acts as a protection shield for the inner tubes (at least up 16 GPa). Structural phase transitions were not observed in this range of pressure

Assessment of the potential in vivo ecotoxicity of Double-Walled Carbon Nanotubes (DWNTs) in water, using the amphibian Ambystoma mexicanum

Because of their specific properties (mechanical, electrical, etc), carbon nanotubes (CNTs) are being assessed for inclusion in many manufactured products. Due to their massive production and number of potential applications, the impact of CNTs on the environment must be taken into consideration. The present investigation evaluates the ecotoxic potential of CNTs in the amphibian larvae (Ambystoma mexicanum). Acute toxicity and genotoxicity were analysed after 12 days of exposure in laboratory conditions. The genotoxic effects were analysed by scoring the micronucleated erythrocytes in the circulating blood of the larvae according to the French standard micronucleus assay. The results obtained in the present study demonstrated that CNTs are neither acutely toxic nor genotoxic to larvae whatever the CNTs concentration in the water, although black masses of CNTs were observed inside the gut. In the increasing economical context of CNTs, complementary studies must be undertaken, especially including mechanistic and environmental investigations

AFM imaging of functionalized double-walled carbon nanotubes

We present a comparative study of several non-covalent approaches to disperse, debundle and noncovalently functionalize double-walled carbon nanotubes (DWNTs). We investigated the ability of bovine serum albumin (BSA), phospholipids grafted onto amine-terminated polyethylene glycol (PLPEG2000-NH2), as well as a combination thereof, to coat purified DWNTs. Topographical imaging with the atomic force microscope (AFM) was used to assess the coating of individual DWNTs and the degree of debundling and dispersion. Topographical images showed that functionalized DWNTs are better separated and less aggregated than pristine DWNTs and that the different coating methods differ in their abilities to successfully debundle and disperse DWNTs. Height profiles indicated an increase in the diameter of DWNTs depending on the functionalization method and revealed adsorption of single molecules onto the nanotubes. Biofunctionalization of the DWNT surface was achieved by coating DWNTs with biotinylated BSA, providing for biospecific binding of streptavidin in a simple incubation step. Finally, biotin-BSA-functionalized DWNTs were immobilized on an avidin layer via the specific avidin–biotin interaction

Strongly correlated properties of the thermoelectric cobalt oxide Ca3Co4O9

We have performed both in-plane resistivity, Hall effect and specific heat measurements on the thermoelectric cobalt oxide Ca$_{3}$Co$_{4}$O$_{9}$. Four distinct transport regimes are found as a function of temperature, corresponding to a low temperature insulating one up to $T_{min}\approx$63 K, a strongly correlated Fermi liquid up to $T^*\approx$140 K, with $\rho=\rho_0+AT^2$ and $A\approx 3.63$ $10^{-2} \mu \Omega cm/K^{2}$, followed by an incoherent metal with $k_Fl\leq 1$ and a high temperature insulator above T$^{**}\approx$510 K . Specific heat Sommerfeld coefficient $\gamma = 93$ mJ/(mol.K$^{2}$) confirms a rather large value of the electronic effective mass and fulfils the Kadowaki-Woods ratio $A/\gamma^2 \approx 0.45$ 10$^{-5}$ $\mu \Omega cm.K^2/(mJ^2mol^{-2})$. Resistivity measurements under pressure reveal a decrease of the Fermi liquid transport coefficient A with an increase of $T^*$ as a function of pressure while the product $A(T^*)^2/a$ remains constant and of order $h/e^2$. Both thermodynamic and transport properties suggest a strong renormalization of the quasiparticles coherence scale of order $T^*$ that seems to govern also thermopower.Comment: 5 pages, 6 figures, accepted for publication in Physical Review