233 research outputs found
Quantitative analysis of shadow X-ray Magnetic Circular Dichroism Photo-Emission Electron Microscopy
Shadow X-ray Magnetic Circular Dichroism Photo-Emission Electron Microscopy
(XMCD-PEEM) is a recent technique, in which the photon intensity in the shadow
of an object lying on a surface, may be used to gather information about the
three-dimensional magnetization texture inside the object. Our purpose here is
to lay the basis of a quantitative analysis of this technique. We first discuss
the principle and implementation of a method to simulate the contrast expected
from an arbitrary micromagnetic state. Text book examples and successful
comparison with experiments are then given. Instrumental settings are finally
discussed, having an impact on the contrast and spatial resolution : photon
energy, microscope extraction voltage and plane of focus, microscope background
level, electric-field related distortion of three-dimensional objects, Fresnel
diffraction or photon scattering
Determination of the local concentrations of Mn interstitials and antisite defects in GaMnAs
We present a method for the determination of the local concentrations of
interstitial and substitutional Mn atoms and As antisite defects in GaMnAs. The
method relies on the sensitivity of the structure factors of weak reflections
to the concentrations and locations of these minority constituents. High
spatial resolution is obtained by combining structure factor measurement and
X-ray analysis in a transmission electron microscope. We demonstrate the
prevalence of interstitials with As nearest neighbors in as-grown layers.Comment: 10 pages, 4 figure
Design of a pulse power supply unit for micro-ECM
Electrochemical micro-machining (μECM) requires a particular pulse power supply unit (PSU) to be developed in order to achieve desired machining performance. This paper summarises the development of a pulse PSU meeting the requirements of μECM. The pulse power supply provides tens of nanosecond pulse duration, positive and negative bias voltages and a polarity switching functionality. It fulfils the needs for tool preparation with reversed pulsed ECM on the machine. Moreover, the PSU is equipped with an ultrafast overcurrent protection which prevents the tool electrode from being damaged in case of short circuits. The developed pulse PSU was used to fabricate micro-tools out of 170 μm WC-Co alloy shafts via micro-electrochemical turning and drill deep holes via μECM in a disk made of 18NiCr6. The electrolyte used for both processes was a mixture of sulphuric acid and NaNO3 aqueous solutions.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMP-ICT-FoF-285614
Design of an electrochemical micromachining machine
Electrochemical micromachining (μECM) is a non-conventional machining process based on the phenomenon of electrolysis. μECM became an attractive area of research due to the fact that this process does not create any defective layer after machining and that there is a growing demand for better surface integrity on different micro applications including microfluidics systems, stress-free drilled holes in automotive and aerospace manufacturing with complex shapes, etc. This work presents the design of a next generation μECM machine for the automotive, aerospace, medical and metrology sectors. It has three axes of motion (X, Y, Z) and a spindle allowing the tool-electrode to rotate during machining. The linear slides for each axis use air bearings with linear DC brushless motors and 2-nm resolution encoders for ultra precise motion. The control system is based on the Power PMAC motion controller from Delta Tau. The electrolyte tank is located at the rear of the machine and allows the electrolyte to be changed quickly. This machine features two process control algorithms: fuzzy logic control and adaptive feed rate. A self-developed pulse generator has been mounted and interfaced with the machine and a wire ECM grinding device has been added. The pulse generator has the possibility to reverse the pulse polarity for on-line tool fabrication.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMPICT- FoF-285614)
Charged defect quantification in Pt/Al2O3/In0. 53Ga0. 47As/InP MOS capacitors
This work focuses on the separation and quantification of fixed bulk oxide charge, fixed charge at the dielectric–semiconductor interface and interface state charge components in the Pt/Al2O3/In0.53Ga0.47As metal-oxide-semiconductor (MOS) system. The availability of atomic layer deposited Al2O3 dielectrics over n- and p-type In0.53Ga0.47As with a range of well-controlled thickness values opens up an experimental route for the determination of the interface state density (Dit) independently of the total fixed oxide charge using capacitance–voltage measurements taken at 1 MHz and −50°C. Low temperature forming gas annealing (350°C) significantly reduces the amount of fixed charge. The interface fixed charge is reduced from ∼ −8.5 × 1012 cm−2 preanneal to ∼ −7.4 × 1011 cm−2 postanneal and the bulk oxide charge is reduced from ∼1.4 × 1019 cm−3 preanneal to ∼5 × 1018 cm−3 postanneal. The forming gas anneal also has a significant effect on the interface state charge, reducing its density from 1.3 × 1013cm−2 preanneal to 4 × 1012 cm−2 postanneal
Identification and thermochemical analysis of high-lignin feedstocks for biofuel and biochemical production
Background - Lignin is a highly abundant biopolymer synthesized by plants as a complex component of plant secondary cell walls. Efforts to utilize lignin-based bioproducts are needed. Results - Herein we identify and characterize the composition and pyrolytic deconstruction characteristics of high-lignin feedstocks. Feedstocks displaying the highest levels of lignin were identified as drupe endocarp biomass arising as agricultural waste from horticultural crops. By performing pyrolysis coupled to gas chromatography-mass spectrometry, we characterized lignin-derived deconstruction products from endocarp biomass and compared these with switchgrass. By comparing individual pyrolytic products, we document higher amounts of acetic acid, 1-hydroxy-2-propanone, acetone and furfural in switchgrass compared to endocarp tissue, which is consistent with high holocellulose relative to lignin. By contrast, greater yields of lignin-based pyrolytic products such as phenol, 2-methoxyphenol, 2-methylphenol, 2-methoxy-4-methylphenol and 4-ethyl-2-methoxyphenol arising from drupe endocarp tissue are documented. Conclusions - Differences in product yield, thermal decomposition rates and molecular species distribution among the feedstocks illustrate the potential of high-lignin endocarp feedstocks to generate valuable chemicals by thermochemical deconstruction
Molecular simulation of chevrons in confined smectic liquid crystals
Chevron structures adopted by confined smectic liquid crystals
are investigated via molecular dynamics simulations of the Gay-Berne
model. The chevrons are formed by quenching nematic films confined
between aligning planar substrates whose easy axes have opposing
azimuthal components. When the substrates are perfectly smooth, the
chevron formed migrates rapidly towards one of the confining walls to
yield a tilted layer structure. However, when substrate roughness is
included, by introducing a small-amplitude modulation to the particle-
substrate interaction well-depth, a symmetric chevron is formed which
remains stable over sufficiently long runtimes for detailed structural
information, such as the relevant order parameters and director orien-
tation, to be determined. For both smooth and rough boundaries, the
smectic order parameter remains non-zero across the entire chevron,
implying that layer identity is maintained across the chevron tip. Also, when the surface-stabilised chevron does eventually revert to a tilted layer structure, it does so via surface slippage, such that layer integrity is maintained throughout the chevron to tilted layer relaxation process.
</p
Impact of oil on bacterial community structure in bioturbated sediments
Oil spills threaten coastlines where biological processes supply essential ecosystem services. Therefore, it is crucial to understand how oil influences the microbial communities in sediments that play key roles in ecosystem functioning. Ecosystems such as sediments are characterized by intensive bioturbation due to burrowing macrofauna that may modify the microbial metabolisms. It is thus essential to consider the bioturbation when determining the impact of oil on microbial communities. In this study, an experimental laboratory device maintaining pristine collected mudflat sediments in microcosms closer to true environmental conditions - with tidal cycles and natural seawater - was used to simulate an oil spill under bioturbation conditions. Different conditions were applied to the microcosms including an addition of: standardized oil (Blend Arabian Light crude oil, 25.6 mg.g21 wet sediment), the common burrowing organism Hediste (Nereis) diversicolor and both the oil and H. diversicolor. The addition of H. diversicolor and its associated bioturbation did not affect the removal of petroleum hydrocarbons. After 270 days, 60% of hydrocarbons had been removed in all microcosms irrespective of the H. diversicolor addition. However, 16S-rRNA gene and 16S-cDNA T-RFLP and RT-PCR-amplicon libraries analysis showed an effect of the condition on the bacterial community structure, composition, and dynamics, supported by PerMANOVA analysis. The 16S-cDNA libraries from microcosms where H. diversicolor was added (oiled and un-oiled) showed a marked dominance of sequences related to Gammaproteobacteria. However, in the oiled-library sequences associated to Deltaproteobacteria and Bacteroidetes were also highly represented. The 16S-cDNA libraries from oiled-microcosms (with and without H. diversicolor addition) revealed two distinct microbial communities characterized by different phylotypes associated to known hydrocarbonoclastic bacteria and dominated by Gammaproteobacteria and Deltaproteobacteria. In the oiled-microcosms, the addition of H. diversicolor reduced the phylotype-richness, sequences associated to Actinobacteria, Firmicutes and Plantomycetes were not detected. These observations highlight the influence of the bioturbation on the bacterial community structure without affecting the biodegradation capacities
- …