4,469 research outputs found
An Rotor Model for Rotational Bands of Superdeformed Nuclei
A nonrigid rotor model is developed from the two-parameter quantum algebra
. [This model presents the symmetry and
shall be referred to as the qp-rotor model.] A rotational energy formula as
well as a qp-deformation of E2 reduced transition probabilities are derived.
The qp-rotor model is applied (through fitting procedures) to twenty rotational
bands of superdeformed nuclei in the , 150 and 190 mass regions.
Systematic comparisons between the qp-rotor model and the q-rotor model of
Raychev, Roussev and Smirnov, on one hand, and a basic three-parameter model,
on the other hand, are performed on energy spectra, on dynamical moments of
inertia and on B(E2) values. The physical signification of the deformation
parameters q and p is discussed.Comment: 24 pages, Latex File, to appear in IJMP
Dirac and Klein-Gordon particles in one-dimensional periodic potentials
We evaluate the dispersion relation for massless fermions, described by the
Dirac equation, and for zero-spin bosons, described by the Klein-Gordon
equation, moving in two dimensions and in the presence of a one-dimensional
periodic potential. For massless fermions the dispersion relation shows a zero
gap for carriers with zero momentum in the direction parallel to the barriers
in agreement with the well-known "Klein paradox". Numerical results for the
energy spectrum and the density of states are presented. Those for fermions are
appropriate to graphene in which carriers behave relativistically with the
"light speed" replaced by the Fermi velocity. In addition, we evaluate the
transmission through a finite number of barriers for fermions and zero-spin
bosons and relate it with that through a superlattice.Comment: 9 pages, 12 figure
Cleaved surface of i-AlPdMn quasicrystals: Influence of the local temperature elevation at the crack tip on the fracture surface roughness
Roughness of i-AlPdMn cleaved surfaces are presently analysed. From the
atomic scale to 2-3 nm, they are shown to exhibit scaling properties hiding the
cluster (0.45 nm) aperiodic structure. These properties are quantitatively
similar to those observed on various disordered materials, albeit on other
ranges of length scales. These properties are interpreted as the signature of
damage mechanisms occurring within a 2-3 nm wide zone at the crack tip. The
size of this process zone finds its origin in the local temperature elevation
at the crack tip. For the very first time, this effect is reported to be
responsible for a transition from a perfectly brittle behavior to a nanoductile
one.Comment: 8 page
Recommended Nomenclature for the Sapphirine and Surinamite Groups (Sapphirine Supergroup)
Minerals isostructural with sapphirine-1A, sapphirine-2M, and surinamite are closely related chain silicates that pose nomenclature problems because of the large number of sites and potential constituents, including several (Be, B, As, Sb) that are rare or absent in other chain silicates. Our recommended nomenclature for the sapphirine group (formerly-aenigmatite group) makes extensive use of precedent, but applies the rules to all known natural compositions, with flexibility to allow for yet undiscovered compositions such as those reported in synthetic materials. These minerals are part of a polysomatic series composed of pyroxene or pyroxene-like and spinel modules, and thus we recommend that the sapphirine supergroup should encompass the polysomatic series. The first level in the classification is based on polysome, i.e. each group within the supergroup Corresponds to a single polysome. At the second level, the sapphirine group is divided into subgroups according to the occupancy of the two largest M sites, namely, sapphirine (Mg), aenigmatite (Na), and rhonite (Ca). Classification at the third level is based on the occupancy of the smallest M site with most shared edges, M7, at which the dominant cation is most often Ti (aenigmatite, rhonite, makarochkinite), Fe(3+) (wilkinsonite, dorrite, hogtuvaite) or Al (sapphirine, khmaralite); much less common is Cr (krinovite) and Sb (welshite). At the fourth level, the two most polymerized T sites are considered together, e.g. ordering of Be at these sites distinguishes hogtuvaite, makarochkinite and khmaralite. Classification at the fifth level is based on X(Mg) = Mg/(Mg + Fe(2+)) at the M sites (excluding the two largest and M7). In principle, this criterion could be expanded to include other divalent cations at these sites, e.g. Mn. To date, most minerals have been found to be either Mg-dominant (X(mg) \u3e 0.5), or Fe(2+)-dominant (X(Mg) \u3c 0.5), at these M sites. However, X(mg) ranges from 1.00 to 0.03 in material described as rhonite, i.e. there are two species present, one Mg-dominant, the other Fe(2+)-dominant. Three other potentially new species are a Mg-dominant analogue of wilkinsonite, rhonite in the Allende meteorite, which is distinguished front rhonite and dorrite in that Mg rather than Ti or FC(3+) is dominant at M7, and an Al-dominant analogue of sapphirine, in which Al \u3e Si at the two most polymerized T sites vs. Al \u3c Si in sapphirine. Further splitting of the supergroup based on occupancies other than those specified above is not recommended
The phase diagram of the lattice Calogero-Sutherland model
We introduce a {\it lattice} version of the Calogero Sutherland model adapted
to describe pairwise interacting steps with discrete positions on a
vicinal surface. The configurational free energy is obtained within a transfer
matrix method. The full phase diagram for attractive and for repulsive
interaction is deduced. For attraction, critical temperatures of faceting
transitions are found to depend on step density.Comment: latex PRBCalogSuth.tex, 6 files, 4 pages [SPEC-S00/900
Endogenous polyamine concentrations in juvenile, adult and micropropagated grapevine (Vitis vinifera L. cv. Pinot noir)
Research Not
Surface composition of BaTiO3/SrTiO3(001) films grown by atomic oxygen plasma assisted molecular beam epitaxy
We have investigated the growth of BaTiO3 thin films deposited on pure and 1%
Nb-doped SrTiO3(001) single crystals using atomic oxygen assisted molecular
beam epitaxy (AO-MBE) and dedicated Ba and Ti Knudsen cells. Thicknesses up to
30 nm were investigated for various layer compositions. We demonstrate 2D
growth and epitaxial single crystalline BaTiO3 layers up to 10 nm before
additional 3D features appear; lattice parameter relaxation occurs during the
first few nanometers and is completed at {\guillemotright}10 nm. The presence
of a Ba oxide rich top layer that probably favors 2D growth is evidenced for
well crystallized layers. We show that the Ba oxide rich top layer can be
removed by chemical etching. The present work stresses the importance of
stoichiometry and surface composition of BaTiO3 layers, especially in view of
their integration in devices.Comment: In press in J. Appl. Phy
Confirmation of the \eps -- \eiso (Amati) relation from the X-ray flash XRF 050416A observed by Swift/BAT
We report Swift Burst Alert Telescope (BAT) observations of the X-ray Flash
(XRF) XRF 050416A. The fluence ratio between the 15-25 keV and 25-50 keV energy
bands of this event is 1.5, thus making it the softest gamma-ray burst (GRB)
observed by BAT so far. The spectrum is well fitted by the Band function with
E^{\rm obs}_{\rm peak} of 15.0_{-2.7}^{+2.3} keV. Assuming the redshift of the
host galaxy (z = 0.6535), the isotropic-equivalent radiated energy E_{\rm iso}
and the peak energy at the GRB rest frame (E^{\rm src}_{\rm peak}) of XRF
050416A are not only consistent with the correlation found by Amati et al. and
extended to XRFs by Sakamoto et al., but also fill-in the gap of this relation
around the 30 - 80 keV range of E^{\rm src}_{\rm peak}. This result tightens
the validity of the E^{\rm src}_{\rm peak} - E_{\rm iso} relation from XRFs to
GRBs.
We also find that the jet break time estimated using the empirical relation
between E^{\rm src}_{\rm peak} and the collimation corrected energy E_{\gamma}
is inconsistent with the afterglow observation by Swift X-ray Telescope. This
could be due to the extra external shock emission overlaid around the jet break
time or to the non existence of a jet break feature for XRF, which might be a
further challenging for GRB jet emission, models and XRF/GRB unification
scenarios.Comment: 16 pages, 4 figures; accepted for publication in ApJ
Co/Ni element ratio in the galactic cosmic rays between 0.8 and 4.3 GeV/nucleon
In a one-day balloon flight of the Trans-Iron Galactic Element Recorder (TIGER) in 1997, the instrument achieved excellent charge resolution for elements near the Fe peak, permitting a new measurement of the element ratio Co/Ni. The best fit to the data, extrapolated to the top of the atmosphere, gives an upper limit for this ratio of 0.093±0.037 over the energy interval 0.8 to 4.3 GeV/nucleon; because a Co peak is not seen in the data, this result is given as an upper limit. Comparing this upper limit with calculations by Webber & Gupta suggests that at the source of these cosmic rays a substantial amount of the electron-capture isotope 59Ni survived. This conclusion is in conflict with the clear evidence from ACE/CRIS below 0.5 GeV/nucleon that there is negligible 59Ni surviving at the source. Possible explanations for this apparent discrepancy are discussed
- …