9,479 research outputs found
Performance assessment of tariff-based air source heat pump load shifting in a UK detached dwelling featuring phase change-enhanced buffering
Using a detailed building simulation model, the amount of thermal buffering, with and without phase change material (PCM), needed to time-shift an air source heat pump's operation to off-peak periods, as defined by the UK 'Economy 10' tariff, was investigated for a typical UK detached dwelling. The performance of the buffered system was compared to the case with no load shifting and with no thermal buffering. Additionally, the load shifting of a population of buffered heat pumps to off-peak periods was simulated and the resulting change in the peak demand on the electricity network was assessed. The results from this study indicate that 1000 L of hot water buffering or 500 L of PCM-enhanced hot water buffering was required to move the operation of the heat pump fully to off-peak periods, without adversely affecting the provision of space heating and hot water for the end user. The work also highlights that buffering and load shifting increased the heat pump's electrical demand by over 60% leading to increased cost to the end user and increased CO2 emissions (depending on the electricity tariff applied and time varying CO2 intensity of the electricity generation mix, respectively). The study also highlights that the load-shifting of populations of buffered heat pumps wholly to off-peak periods using crude instruments such as tariffs increased the peak loading on the electrical network by over 50% rather than reducing it and that careful consideration is needed as to how the load shifting of a group of heat pumps is orchestrated
Ray model and ray-wave correspondence in coupled optical microdisks
We introduce a ray model for coupled optical microdisks, in which we select
coupling-efficient rays among the splitting rays. We investigate the resulting
phase-space structure and report island structures arising from the
ray-coupling between the two microdisks. We find the microdisks's refractive
index to influence the phase-space structure and calculate the stability and
decay rates of the islands. Turning to ray-wave correspondence, we find many
resonances to be directly related to the presence of these islands. We study
the relation between the (ray-picture originating) island structures and the
(wave-picture originating) spectral properties of resonances, especially the
leakiness of the resonances which is represented as the imaginary part of the
complex wave vector.Comment: 9 pages, 8 figure
Recommended from our members
An industrial profile of wood wool/cement slab manufacture
This profile describes a process developed at the Tropical Products Institute for the manufacture of wood wool/cement clabs. Unlike other commercially available processes this process involves the use of a cement slurry. The process is aimed at conditions in developing countries and significant features include minimum use of machinery, maximum use of labour, flexibility in production to suit market requirements and relatively low capital outlay. For a plant to produce 160 slabs per day, about £50,000 c.i.f. at September 1979 prices, excluding locally available items, is required. At least 28 employment opportunities are created. The profile includes a description of the process, a list of the machinery and equipment, components of capital cost, physical inputs and labour requirement
A Fractional Hawkes Process
We modify ETAS models by replacing the Pareto-like kernel proposed by Ogata with a Mittag-Leffler type kernel. Provided that the kernel decays as a power law with exponent , this replacement has the advantage that the Laplace transform of the Mittag-Leffler function is known explicitly, leading to simpler calculation of relevant quantities
Unconstrained simultaneous scheme to fully couple reconstruction and registration for digital breast tomosynthesis: a feasible study
Digital breast tomosynthesis (DBT) provides a pseudo-3D reconstruction which addresses the limitation of superimposition of dense fibro-glandular tissue associated with conventional mammography. Reg- istration of temporal DBT volumes searches for the optimum deforma- tion to transform two observed images of the same object into a common reference frame. This aligns the two images via minimising an objective function that calculates the similarity between the two datasets. In this paper, we present a novel algorithm which combines recon- struction of a pair of temporal DBT acquisitions with their simultaneous registration. We approach this nonlinear inverse problem using a generic unconstrained optimisation scheme. To evaluate the performance of our method we use 2D and 3D software phantoms and demonstrate that this simultaneous approach has comparable results to performing these tasks sequentially or iteratively w.r.t both the reconstruction fidelity and the registration accuracy
Performance of information criteria for selection of Hawkes process models of financial data
We test three common information criteria (IC) for selecting the order of a Hawkes process with an intensity kernel that can be expressed as a mixture of exponential terms. These processes find application in high-frequency financial data modelling. The information criteria are Akaike's information criterion (AIC), the Bayesian information criterion (BIC) and the Hannan-Quinn criterion (HQ). Since we work with simulated data, we are able to measure the performance of model selection by the success rate of the IC in selecting the model that was used to generate the data. In particular, we are interested in the relation between correct model selection and underlying sample size. The analysis includes realistic sample sizes and parameter sets from recent literature where parameters were estimated using empirical financial intra-day data. We compare our results to theoretical predictions and similar empirical findings on the asymptotic distribution of model selection for consistent and inconsistent IC
Poisson transition rates from time-domain measurements with finite bandwidth
In time-domain measurements of a Poisson two-level system, the observed
transition rates are always smaller than those of the actual system, a general
consequence of finite measurement bandwidth in an experiment. This
underestimation of the rates is significant even when the measurement and
detection apparatus is ten times faster than the process under study. We derive
here a quantitative form for this correction using a straightforward
state-transition model that includes the detection apparatus, and provide a
method for determining a system's actual transition rates from
bandwidth-limited measurements. We support our results with computer
simulations and experimental data from time-domain measurements of
quasiparticle tunneling in a single-Cooper-pair transistor.Comment: 4 pages, 5 figure
Epigenetic patterns newly established after interspecific hybridization in natural populations of Solanum
Interspecific hybridization is known for triggering genetic and epigenetic changes, such as modifications on DNA methylation patterns and impact on phenotypic plasticity and ecological adaptation. Wild potatoes (Solanum, section Petota) are adapted to multiple habitats along the Andes, and natural hybridizations have proven to be a common feature among species of this group. Solanum × rechei, a recently formed hybrid that grows sympatrically with the parental species S. kurtzianum and S. microdontum, represents an ideal model for studying the ecologically and evolutionary importance of hybridization in generating of epigenetic variability. Genetic and epigenetic variability and their correlation with morphological variation were investigated in wild and ex situ conserved populations of these three wild potato species using amplified fragment length polymorphism (AFLP) and methylation‐sensitive amplified polymorphism (MSAP) techniques. We observed that novel methylation patterns doubled the number of novel genetic patterns in the hybrid and that the morphological variability measured on 30 characters had a higher correlation with the epigenetic than with the genetic variability. Statistical comparison of methylation levels suggested that the interspecific hybridization induces genome demethylation in the hybrids. A Bayesian analysis of the genetic data reveled the hybrid nature of S. × rechei, with genotypes displaying high levels of admixture with the parental species, while the epigenetic information assigned S. × rechei to its own cluster with low admixture. These findings suggested that after the hybridization event, a novel epigenetic pattern was rapidly established, which might influence the phenotypic plasticity and adaptation of the hybrid to new environments.EEA La ConsultaFil: Cara, Nicolás. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Centro Cientifico Tecnologico Mendoza. Instituto de Biologia Agricola de Mendoza; Argentina. Universidad Nacional de Cuyo. Facultad de Ciencias Agrarias. Instituto de Biologia Agricola de Mendoza; ArgentinaFil: Marfil, Carlos Federico. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Centro Cientifico Tecnologico Mendoza. Instituto de Biologia Agricola de Mendoza; Argentina. Universidad Nacional de Cuyo. Facultad de Ciencias Agrarias. Instituto de Biologia Agricola de Mendoza; ArgentinaFil: Masuelli, Ricardo Williams. Instituto Nacional de Tecnología Agropecuaria (INTA). Estación Experimental Agropecuaria La Consulta; Argentin
- …