270 research outputs found
Random phase approximation up to the melting point: Impact of anharmonicity and nonlocal many-body effects on the thermodynamics of Au
Application of the generalized gradient corrected functional within standard density-functional theory results in a dramatic failure for Au, leading to divergent thermodynamic properties well below the melting point. By combining the upsampled thermodynamic integration using Langevin dynamics technique with the random phase approximation, we show that inclusion of nonlocal many-body effects leads to a stabilization and to an excellent agreement with experiment. © Published by the American Physical Society
Dielectric properties of nano-confined water: a canonical thermopotentiostat approach
We introduce a novel approach to sample the canonical ensemble at constant
temperature and applied electric potential. Our approach can be
straightforwardly implemented into any density-functional theory code. Using
thermopotentiostat molecular dynamics simulations allows us to compute the
dielectric constant of nano-confined water without any assumptions for the
dielectric volume. Compared to the commonly used approach of calculating
dielectric properties from polarization fluctuations, our thermopotentiostat
technique reduces the required computational time by two orders of magnitude
2-Sulfoethylammonium trifluoromethanesulfonate as an Ionic Liquid for High Temperature PEM Fuel Cells
2-Sulfoethylammonium trifluoromethanesulfonate ([2-Sea+][TfO−]) represents a novel class of proton-conducting ionic liquids (PILs) based on aminoalkylsulfonic acids. The fundamental suitability of [2-Sea+][TfO−] for application as a protic electrolyte in high temperature PEM fuel cells (HT-PEFCs) was investigated up to a temperature of 130°C. A comparison was made against a state-of-the-art electrolyte, phosphoric acid. [2-Sea+][TfO−] is electrochemically and thermally stable up to 140°C. The specific conductivity of 95 wt% [2-Sea+][TfO−] aqueous solution at 130°C is ≈20 times lower compared to 95 wt% H3PO4. The strong coupling of ion transport and viscous flow suggests a vehicular ion (proton) transport in [2-Sea+][TfO−]. 95 wt% [2-Sea+][TfO−] shows superior kinetics in terms of oxygen reduction reaction (ORR) on polycrystalline Pt compared to 95 wt% H3PO4 at temperatures greater than 90°C in a fuel cell-applicable potential range. Double layer capacitances suggest a complex double layer structure, including adsorbed [2-Sea+][TfO−] and water, as well as intermediates of oxygen reduction and Pt oxidation. Potential and temperature-dependent ORR kinetics in the presence of 95 wt% [2-Sea+][TfO−] yield different Tafel slopes (b = 82–139 mV) and symmetry factors (β = 0.46–0.96), indicating changes in surface coverages of the adsorbed species and possibly also a change in the reaction mechanism
Minimal Model for Sand Dunes
We propose a minimal model for aeolian sand dunes. It combines an analytical
description of the turbulent wind velocity field above the dune with a
continuum saltation model that allows for saturation transients in the sand
flux. The model provides a qualitative understanding of important features of
real dunes, such as their longitudinal shape and aspect ratio, the formation of
a slip face, the breaking of scale invariance, and the existence of a minimum
dune size.Comment: 4 pages, 4 figures, replaced with publishd versio
Minimal model for aeolian sand dunes
We present a minimal model for the formation and migration of aeolian sand
dunes. It combines a perturbative description of the turbulent wind velocity
field above the dune with a continuum saltation model that allows for
saturation transients in the sand flux. The latter are shown to provide the
characteristic length scale. The model can explain the origin of important
features of dunes, such as the formation of a slip face, the broken scale
invariance, and the existence of a minimum dune size. It also predicts the
longitudinal shape and aspect ratio of dunes and heaps, their migration
velocity and shape relaxation dynamics. Although the minimal model employs
non-local expressions for the wind shear stress as well as for the sand flux,
it is simple enough to serve as a very efficient tool for analytical and
numerical investigations and to open up the way to simulations of large scale
desert topographies.Comment: 19 pages, 22 figure
A Continuum Saltation Model for Sand Dunes
We derive a phenomenological continuum saltation model for aeolian sand
transport that can serve as an efficient tool for geomorphological
applications. The coupled differential equations for the average density and
velocity of sand in the saltation layer reproduce both known equilibrium
relations for the sand flux and the time evolution of the sand flux as
predicted by microscopic saltation models. The three phenomenological
parameters of the model are a reference height for the grain-air interaction,
an effective restitution coefficient for the grain-bed interaction, and a
multiplication factor characterizing the chain reaction caused by the impacts
leading to a typical time or length scale of the saturation transients. We
determine the values of these parameters by comparing our model with wind
tunnel measurements. Our main interest are out of equilibrium situations where
saturation transients are important, for instance at phase boundaries
(ground/sand) or under unsteady wind conditions. We point out that saturation
transients are indispensable for a proper description of sand flux over
structured terrain, by applying the model to the windward side of an isolated
dune, thereby resolving recently reported discrepancies between field
measurements and theoretical predictions.Comment: 11 pages, 7 figure
Corridors of barchan dunes: stability and size selection
Barchans are crescentic dunes propagating on a solid ground. They form dune
fields in the shape of elongated corridors in which the size and spacing
between dunes are rather well selected. We show that even very realistic models
for solitary dunes do not reproduce these corridors. Instead, two instabilities
take place. First, barchans receive a sand flux at their back proportional to
their width while the sand escapes only from their horns. Large dunes
proportionally capture more than they loose sand, while the situation is
reversed for small ones: therefore, solitary dunes cannot remain in a steady
state. Second, the propagation speed of dunes decreases with the size of the
dune: this leads -- through the collision process -- to a coarsening of barchan
fields. We show that these phenomena are not specific to the model, but result
from general and robust mechanisms. The length scales needed for these
instabilities to develop are derived and discussed. They turn out to be much
smaller than the dune field length. As a conclusion, there should exist further
- yet unknown - mechanisms regulating and selecting the size of dunes.Comment: 13 pages, 13 figures. New version resubmitted to Phys. Rev. E.
Pictures of better quality available on reques
The InSight HP^3 mole on Mars: Lessons learned from attempts to penetrate to depth in the Martian soil
The NASA InSight mission payload includes the Heat Flow and Physical
Properties Package HP^3 to measure the surface heat flow. The package was
designed to use a small penetrator - nicknamed the mole - to implement a string
of temperature sensors in the soil to a depth of 5m. The mole itself is
equipped with sensors to measure a thermal conductivity as it proceeds to
depth. The heat flow would be calculated from the product of the temperature
gradient and the thermal conductivity. To avoid the perturbation caused by
annual surface temperature variations, the measurements would be taken at a
depth between 3 m and 5 m. The mole was designed to penetrate cohesionless soil
similar to Quartz sand which was expected to provide a good analogue material
for Martian sand. The sand would provide friction to the buried mole hull to
balance the remaining recoil of the mole hammer mechanism that drives the mole
forward. Unfortunately, the mole did not penetrate more than a mole length of
40 cm. The failure to penetrate deeper was largely due to a few tens of
centimeter thick cohesive duricrust that failed to provide the required
friction. Although a suppressor mass and spring in the hammer mechanism
absorbed much of the recoil, the available mass did not allow a system that
would have eliminated the recoil. The mole penetrated to 40 cm depth benefiting
from friction provided by springs in the support structure from which it was
deployed. It was found in addition that the Martian soil provided unexpected
levels of penetration resistance that would have motivated to designing a more
powerful mole. It is concluded that more mass would have allowed to design a
more robust system with little or no recoil, more energy of the mole hammer
mechanism and a more massive support structure.Comment: 34 pages, 15 figures, submitted to Adnaves in Space Researc
Collision dynamics of two barchan dunes simulated by a simple model
The collision processes of two crescentic dunes called barchans are
systematically studied using a simple computer simulation model. The simulated
processes, coalescence, ejection and reorganization, qualitatively correspond
to those observed in a water tank experiment. Moreover we found the realized
types of collision depend both on the mass ratio and on the lateral distance
between barchans under initial conditions. A simple set of differential
equations to describe the collision of one-dimensional (1D) dunes is
introduced.Comment: 4 pages, 5 figures : To be published in Journal of the Physical
Society of Japa
Efficacy and safety of trimodulin, a novel polyclonal antibody preparation, in patients with severe community-acquired pneumonia: a randomized, placebo-controlled, double-blind, multicenter, phase II trial (CIGMA study)
Purpose
The CIGMA study investigated a novel human polyclonal antibody preparation (trimodulin) containing ~ 23% immunoglobulin (Ig) M, ~ 21% IgA, and ~ 56% IgG as add-on therapy for patients with severe community-acquired pneumonia (sCAP).
Methods
In this double-blind, phase II study (NCT01420744), 160 patients with sCAP requiring invasive mechanical ventilation were randomized (1:1) to trimodulin (42 mg IgM/kg/day) or placebo for five consecutive days. Primary endpoint was ventilator-free days (VFDs). Secondary endpoints included 28-day all-cause and pneumonia-related mortality. Safety and tolerability were monitored. Exploratory post hoc analyses were performed in subsets stratified by baseline C-reactive protein (CRP; ≥ 70 mg/L) and/or IgM (≤ 0.8 g/L).
Results
Overall, there was no statistically significant difference in VFDs between trimodulin (mean 11.0, median 11 [n = 81]) and placebo (mean 9.6; median 8 [n = 79]; p = 0.173). Twenty-eight-day all-cause mortality was 22.2% vs. 27.8%, respectively (p = 0.465). Time to discharge from intensive care unit and mean duration of hospitalization were comparable between groups. Adverse-event incidences were comparable. Post hoc subset analyses, which included the majority of patients (58–78%), showed significant reductions in all-cause mortality (trimodulin vs. placebo) in patients with high CRP, low IgM, and high CRP/low IgM at baseline.
Conclusions
No significant differences were found in VFDs and mortality between trimodulin and placebo groups. Post hoc analyses supported improved outcome regarding mortality with trimodulin in subsets of patients with elevated CRP, reduced IgM, or both. These findings warrant further investigation
- …