Burn-Resistant, Strong Metal-Matrix Composites

Ceramic particulate fillers increase the specific strengths and burn resistances of metals: This is the conclusion drawn by researchers at Johnson Space Center's White Sands Test Facility. The researchers had theorized that the inclusion of ceramic particles in metal tools and other metal objects used in oxygen-rich atmospheres (e.g., in hyperbaric chambers and spacecraft) could reduce the risk of fire and the consequent injury or death of personnel. In such atmospheres, metal objects act as ignition sources, creating fire hazards. However, not all metals are equally hazardous: some are more burn-resistant than others are. It was the researchers purpose to identify a burn-resistant, high-specific-strength ceramic-particle/metal-matrix composite that could be used in oxygen-rich atmospheres. The researchers studied several metals. Nickel and cobalt alloys exhibit high burn resistances and are dense. The researchers next turned to ceramics, which they knew do not act as ignition sources. Unlike metals, ceramics are naturally burn-resistant. Unfortunately, they also exhibit low fracture toughnesses

Formation of iron nitride thin films with Al and Ti additives

In this work we investigate the process of iron nitride (Fe-N) phase formation using 2 at.% Al or 2 at.% Ti as additives. The samples were prepared with a magnetron sputtering technique using different amount of nitrogen during the deposition process. The nitrogen partial pressure (\pn) was varied between 0-50% (rest Argon) and the targets of pure Fe, [Fe+Ti] and [Fe+Al] were sputtered. The addition of small amount of Ti or Al results in improved soft-magnetic properties when sputtered using \pn $\leq$ 10\p. When \pn is increased to 50\p non-magnetic Fe-N phases are formed. We found that iron mononitride (FeN) phases (N at% $\sim$50) are formed with Al or Ti addition at \pn =50% whereas in absence of such addition \eFeN phases (N\pat$\sim$30) are formed. It was found that the overall nitrogen content can be increased significantly with Al or Ti additions. On the basis of obtained result we propose a mechanism describing formation of Fe-N phases Al and Ti additives.Comment: 9 Pages, 7 Figure

Fe and N self-diffusion in non-magnetic Fe:N

Fe and N self-diffusion in non-magnetic FeN has been studied using neutron reflectivity. The isotope labelled multilayers, FeN/57Fe:N and Fe:N/Fe:15N were prepared using magnetron sputtering. It was remarkable to observe that N diffusion was slower compared to Fe while the atomic size of Fe is larger compared to N. An attempt has been made to understand the diffusion of Fe and N in non-magnetic Fe:N

Hemodynamic determinants of left atrial strain in patients with hypertrophic cardiomyopathy:A combined echocardiography and CMR study

BackgroundLeft atrial (LA) strain is associated with symptomatic status and atrial fibrillation in patients with hypertrophic cardiomyopathy (HCM). However, hemodynamic determinants of LA reservoir (LARS), conduit, and pump strains have not been examined and data are needed on the relation of LA strain with exercise tolerance in HCM.MethodsFifty HCM patients with echocardiographic and CMR imaging within 30 days were included. Left ventricular (LV) volumes, mass, EF, scar extent, extracellular volume fraction (ECV), and LA maximum volume were measured by CMR. Echo studies were analyzed for mitral inflow, pulmonary vein flow, mitral annulus tissue Doppler velocities, LV global longitudinal strain, and LA strain. Twenty six patients able and willing to exercise underwent cardiopulmonary stress testing for peak oxygen consumption (MVO2), and VE/VCO2 slope. Patients were followed for clinical events.FindingsLARS was significantly associated with indices of LA systolic function, LV GLS, and LV filling pressures (PConclusionsLV structure, systolic and diastolic function, and LA systolic function determine the 3 components of LA strain. LA strain is associated with exercise tolerance and clinical events in patients with HCM

Radiative transition rates and collision strengths for Si II

Aims. This work reports radiative transition rates and electron impact excitation collision strengths for levels of the 3s23p, 3s3p2, 3s24s, and 3s23d configurations of Siii. Methods. The radiative data were computed using the Thomas-Fermi-Dirac-Amaldi central potential, but with the modifications introduced by Bautista (2008) that account for the effects of electron-electron interactions. We also introduce new schemes for the optimization of the variational parameters of the potential. Additional calculations were carried out with the Relativistic Hartree-Fock and the multiconfiguration Dirac-Fock methods. Collision strengths in LS-coupling were calculated in the close coupling approximation with the R-matrix method. Then, fine structure collision strengths were obtained by means of the intermediate-coupling frame transformation (ICFT) method which accounts for spin-orbit coupling effects. Results. We present extensive comparisons between the results of different approximations and with the most recent calculations and experiment available in the literature. From these comparisons we derive a recommended set of gf- values and radiative transition rates with their corresponding estimated uncertainties. We also study the effects of different approximations in the representation of the target ion on the electron-impact collision strengths. Our most accurate set of collision strengths were integrated over a Maxwellian distribution of electron energies and the resulting effective collision strengths are given for a wide range of temperatures. Our results present significant differences from recent calculations with the B-spline non-orthogonal R-matrix method. We discuss the sources of the differences.Comment: 6 figures, 5 tables within text, 2 electronic table

Ultrasound-guided oblique approach for peripheral venous access in a phantom model

BACKGROUND: Ultrasound (US) vascular guidance is traditionally performed in transverse (T) and longitudinal (L) axes, each with drawbacks. We hypothesized that the introduction of a novel oblique (O) approach would improve the success of US-guided peripheral venous access. We examined emergency physician (EP) performance using the O approach in a gel US phantom. METHODS: In a prospective, case control study, EPs were enrolled from four levels of physician experience including postgraduate years one to three (PGY1, PGY2, PGY3) and attending physicians. After a brief training session, each participant attempted vessel aspiration using a linear probe in T, L, and O axes on a gel US phantom. Time to aspiration and number of attempts to aspiration were recorded. The approach order was randomized, and descriptive statistics were used. RESULTS: Twenty-four physicians participated. The first-attempt success rate was lower for O, 45.83%, versus 70.83% for T (p = 0.03) and 83.33% for L (p = 0.01). The average time to aspiration was 12.5 s (O) compared with 9.47 s (T) and 9.74 s (L), respectively. There were no significant differences between all four groups in regard to total amount of time and number of aspiration attempts; however, a trend appeared revealing that PGY3 and attending physicians tended to aspirate in less time and by fewer attempts in all three orientations when compared with the PGY2 and PGY1 physicians. CONCLUSION: In this pilot study, US-guided simulated peripheral venous access using a phantom gel model in a mixed user group showed that the novel oblique approach was not initially more successful versus T and L techniques

“Pure” severe aortic stenosis without concomitant valvular heart diseases:echocardiographic and pathophysiological features

Purpose!#!In echocardiography the severity of aortic stenosis (AS) is defined by effective orifice area (EOA), mean pressure gradient (mPG!##!Methods and results!#!Patients (n = 306) with asymptomatic (n = 133) and symptomatic (n = 173) 'pure' severe AS (mean age 78 ± 9.5 years) defined by indexed EOA < 0.6 cm!##!Conclusion!#!In patients with 'pure' AS according to current guidelines the presence of combined LVH, DD and PAH as accepted pathophysiological sequelae of severe AS cannot be confirmed. Probably, the detection of these secondary cardiac alterations might improve the diagnostic algorithm to avoid overestimation of AS severity

Systemwide Clinical Ultrasound Program Development: An Expert Consensus Model.

Clinical ultrasound (CUS) is integral to the practice of an increasing number of medical specialties. Guidelines are needed to ensure effective CUS utilization across health systems. Such guidelines should address all aspects of CUS within a hospital or health system. These include leadership, training, competency, credentialing, quality assurance and improvement, documentation, archiving, workflow, equipment, and infrastructure issues relating to communication and information technology. To meet this need, a group of CUS subject matter experts, who have been involved in institution- and/or systemwide clinical ultrasound (SWCUS) program development convened. The purpose of this paper was to create a model for SWCUS development and implementation