Development of a regenerative pump impeller using rapid manufacturing techniques

This paper presents a method of rapid manufacture used in the development of a regenerative pump impeller. Rapid manufacturing technology was used to create complex impeller blade profiles for testing as part of a regenerative pump optimisation process. Regenerative pumps are the subject of increased interest in industry. Ten modified impeller blade profiles, relative to the standard radial configuration, were evaluated with the use of computational fluid dynamics and experimental testing. Prototype impellers were needed for experimental validation of the CFD results. The manufacture of the complex blade profiles, using conventional milling techniques, is a considerable challenge for skilled machinists. The complexity of the modified blade profiles would normally necessitate the use of expensive CNC machining with 5 asis capability. With an impeller less than 75mm in diameter and a maximum blade thickness of 1.3mm, a rapid manufacturing technique enabled production of complex blade profiles that were dimensionally accurate and structurally robust enough for testing. As more advanced rapid prototyping machines become available in the study in the future, e.g. 3D photopolymer jetting machine, the quality of the parts, particularly in terms of surface finish, will improve and the amount of post processing operations will reduce. This technique offers the possibility to produce components of increased complexity whilst ensuring quality, strength, performance and speed of manufacture. The ability to manufacture complex blade profiles that are robust enough for testing, in a rapid and cost effective manner is proving essential in the overall design optimisation process for the pump

Numerical and experimental design study of a regenerative pump

This paper presents the use of a commercial CFD code to simulate the flow-field within the regenerative pump and compare the CFD results with new experimental data. Regenerative pumps are the subject of increased interest in industry as these pumps are low cost, low specific speed, compact and able to deliver high heads with stable performance characteristics. The complex flow-field within the regenerative pump represents a considerable challenge to detailed mathematical modelling. This paper also presents a novel rapid manufacturing process used to consider the effect of impeller geometry changes on the pump efficiency. Ten modified impeller blade profiles, relative to a standard radial configuration, were evaluated. The CFD performance results demonstrate reasonable agreement with the experimental tests. The CFD results also demonstrate that it is possible to represent the helical flow field for the pump which has been witnessed only in experimental flow visualisation until now. The ability to use CFD modelling in conjunction with rapid manufacturing techniques has meant that more complex impeller geometry configurations can now be assessed with better understanding of the flow-field and resulting efficiency

A numerical flow simulation of a mixed flow pump

Mixed flow pumps are primarily axial flow pumps, but they impart some degree of radial and swirling momentum to the pump fluid as it passes through the rotor section. They are popular for pumping water in tight spaces, so are used for residential wells, municipal water works, industrial applications, and even for powering small water craft

A numerical and experimental analysis of flow in a centrifugal pump

Computational fluid dynamics (CFD) analysis has been used to solve the unsteady three-dimensional viscous flow in the entire impeller and volute casing of a centrifugal pump. The results of the calculations are used to predict the impeller/volute interaction and to obtain the unsteady pressure distribution in the impeller and volute casing. The calculated unsteady pressure distribution is used to determine the unsteady blade loading. The calculations at the design point and at two off-design points are carried out with a multiple frame of reference and a sliding mesh technique is applied to consider the impeller/volute interaction

Ironwork of Teixois-Taramundi (Asturias) Spain

This paper describes an old ironwork placed in a Spanish village. All parts of it are studied, specially the Air supply and the Hydraulic wheel. The minimum area in the water trump for a correct air flow is calculated. On the other hand, also the power supply by the hydraulic wheel, in normal conditions, to move the hammer with a required frequency is calculated

Production spectrum of high energy electrons from high energy cosmic ray collisions

Production spectrum of high energy electrons from high energy cosmic ray collision

Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques

Regenerative pumps are low cost, compact, able to deliver high heads at low flow rates. Furthermore with stable performance characteristics they can operate with very small NPSH. The complexity of the flow field is a serious challenge for any kind of mathematical modelling. This paper compares an analytical and numerical technique of resolving the performance for a new regenerative pump design. The performance characteristics computed by a CFD approach and a new one-dimensional model are compared and matched to experimental test results. The approaches of both modelling techniques are assessed as potential design tools. The approaches are shown to not only successfully resolve the complex flow field within the pump; the CFD is also capable of resolving local flow properties to conduct further refinements. The flow field is represented by the CFD as it has never been before. A new design process is suggested. The new regenerative pump design is considered with a comparable duty centrifugal pump, proving that for many high head low flow rate applications the regenerative pump is a better choice

Immorality and Irrationality

Does immorality necessarily involve irrationality? The question is often taken to be among the deepest in moral philosophy. But apparently deep questions sometimes admit of deflationary answers. In this case we can make way for a deflationary answer by appealing to dualism about rationality, according to which there are two fundamentally distinct notions of rationality: structural rationality and substantive rationality. I have defended dualism elsewhere. Here, I’ll argue that it allows us to embrace a sensible – I will not say boring – moderate view about the relationship between immorality and irrationality: roughly, that immorality involves substantive irrationality, but not structural irrationality. I defend this moderate view, and argue that many of the arguments for less moderate views turn either on missing the distinction between substantive and structural rationality, or on misconstruing it

An experimental investigation of natural convection with solidification in a differentially heated cavity

This paper introduces an experimental rig used to produce data for the validation of computational models of natural convection within water in an enclosed cavity. The rig consisted of a rectangular cavity with the two long sides maintained at constant temperature. All other surfaces were insulated and adiabatic except for the top surface which was a free surface with an air gap between the free surface and the insulation. Experimental data in the form of velocity, ice growth rate and profiles are presented at 30 min time steps with a cold wall temperature of −10 °C and hot wall temperature of 5 °C. The data produced has systematic and random errors of ±0.4% and ±0.5%, respectively

Delay in diabetic retinopathy screening increases the rate of detection of referable diabetic retinopathy

Aims - To assess whether there is a relationship between delay in retinopathy screening after diagnosis of Type 2 diabetes and level of retinopathy detected. Methods - Patients were referred from 88 primary care practices to an English National Health Service diabetic eye screening programme. Data for screened patients were extracted from the primary care databases using semi-automated data collection algorithms supplemented by validation processes. The programme uses two-field mydriatic digital photographs graded by a quality assured team. Results - Data were available for 8183 screened patients with diabetes newly diagnosed in 2005, 2006 or 2007. Only 163 with Type 1 diabetes were identified and were insufficient for analysis. Data were available for 8020 with newly diagnosed Type 2 diabetes. Of these, 3569 were screened within 6 months, 2361 between 6 and 11 months, 1058 between 12 and 17 months, 366 between 18 and 23 months, 428 between 24 and 35 months, and 238 at 3 years or more after diagnosis. There were 5416 (67.5%) graded with no retinopathy, 1629 (20.3%) with background retinopathy in one eye, 753 (9.4%) with background retinopathy in both eyes and 222 (2.8%) had referable diabetic retinopathy. There was a significant trend (P = 0.0004) relating time from diagnosis to screening detecting worsening retinopathy. Of those screened within 6 months of diagnosis, 2.3% had referable retinopathy and, 3 years or more after diagnosis, 4.2% had referable retinopathy. Conclusions - The rate of detection of referable diabetic retinopathy is elevated in those who were not screened promptly after diagnosis of Type 2 diabetes