Некоторые результаты применения метода геометрического анализа дизъюнктов для поисков смещенного крыла пласта в Прокопьевском районе Кузбасса

In this paper we present the development of a compact, thermo-optically stable and vibration and mechanical shock resistant mounting technique by soldering of optical components. Based on this technique, new generations of laser pump sources for aerospace applications are designed. In these laser systems the used soldering technique replaces the glued connection between the optical component and its join partner. The main challenges are the alignment accuracy in the arc second range and the realization of the long term stability of every single part in the laser system (e.g. resonator mirrors)

О необходимости прослеживания Балейско-Дарасунского разлома в пределах Борщевочного кряжа

In this paper we present the development of a compact, thermo-optically stable and vibration and mechanical shock resistant mounting technique by soldering of optical components. Based on this technique a new generation of laser sources for aerospace applications is designed. In these laser systems solder technique replaces the glued and bolted connections between optical component, mount and base plate. Alignment precision in the arc second range and realization of long term stability of every single part in the laser system is the main challenge. At the Fraunhofer Institute for Laser Technology ILT a soldering and mounting technique has been developed for high precision packaging. The specified environmental boundary conditions (e.g. a temperature range of -40 °C to +50 °C) and the required degrees of freedom for the alignment of the components have been taken into account for this technique. In general the advantage of soldering compared to gluing is that there is no outgassing. In addition no flux is needed in our special process. The joining process allows multiple alignments by remelting the solder. The alignment is done in the liquid phase of the solder by a 6 axis manipulator with a step width in the nm range and a tilt in the arc second range. In a next step the optical components have to pass the environmental tests. The total misalignment of the component to its adapter after the thermal cycle tests is less than 10 arc seconds. The mechanical stability tests regarding shear, vibration and shock behavior are well within the requirements

Universal phase transitions of B1 structured stoichiometric transition-metal carbides

The high-pressure phase transitions of B1-structured stoichiometric transition metal carbides (TMCs, TM=Ti, Zr, Hf, V, Nb, and Ta) were systematically investigated using ab initio calculations. These carbides underwent universal phase transitions along two novel phase-transition routes, namely, B1\rightarrowdistorted TlI (TlI')\rightarrowTlI and/or B1\rightarrowdistorted TiB (TiB')\rightarrowTiB, when subjected to pressures. The two routes can coexist possibly because of the tiny enthalpy differences between the new phases under corresponding pressures. Four new phases result from atomic slips of the B1-structured parent phases under pressure. After completely releasing the pressure, taking TiC as a representative of TMCs, only its new TlI'-type phase is mechanically and dynamically stable, and may be recovered.Comment: [email protected]

Моделирование уравнений проекционного осциллографирования на машине "ЭМУ-10"

The passive-alignment-packaging technique presented in this work provides a method for mounting tolerance-insensitive optical components e.g. non-linear crystals by means of mechanical stops. The requested tolerances for the angle deviation are ±100 µrad and for the position tolerance ±100 µm. Only the angle tolerances were investigated, because they are more critical. The measurements were carried out with an autocollimator. Fused silica components were used for test series. A solder investigation was carried out. Different types of solder were tested. Due to good solderability on air and low induced stress in optical components, Sn based solders were indicated as the most suitable solders. In addition several concepts of reflow soldering configuration were realized. In the first iteration a system with only the alignment of the yaw angle was implemented. The deviation for all materials after the thermal and mechanical cycling was within the tolerances. The solderability of BBO and LBO crystals was investigated and concepts for mounting were developed

Hausdorff spectrum of harmonic measure

For every non-elementary hyperbolic group, we show that for every random walk with finitely supported admissible step distribution, the associated entropy equals the drift times the logarithmic volume growth if and only if the corresponding harmonic measure is comparable with Hausdorfff measure on the boundary. Moreover, we introduce one parameter family of probability measures which interpolates a Patterson-Sullivan measure and the harmonic measure, and establish a formula of Hausdorff spectrum (multifractal spectrum) of the harmonic measure. We also give some finitary versions of dimensional properties of the harmonic measure

Thermomechanical response of thickly tamped targets and diamond anvil cells under pulsed hard x-ray irradiation

In the laboratory study of extreme conditions of temperature and density, the exposure of matter to high intensity radiation sources has been of central importance. Here, we interrogate the performance of multi-layered targets in experiments involving high intensity, hard x-ray irradiation, motivated by the advent of extremely high brightness hard x-ray sources, such as free electron lasers and 4th-generation synchrotron facilities. Intense hard x-ray beams can deliver significant energy in targets having thick x-ray transparent layers (tampers) around samples of interest for the study of novel states of matter and materials’ dynamics. Heated-state lifetimes in such targets can approach the microsecond level, regardless of radiation pulse duration, enabling the exploration of conditions of local thermal and thermodynamic equilibrium at extreme temperature in solid density matter. The thermal and mechanical responses of such thick layered targets following x-ray heating, including hydrodynamic relaxation and heat flow on picosecond to millisecond timescales, are modeled using radiation hydrocode simulation, finite element analysis, and thermodynamic calculations. Assessing the potential for target survival over one or more exposures and resistance to damage arising from heating and resulting mechanical stresses, this study doubles as an investigation into the performance of diamond anvil high pressure cells under high x-ray fluences. Long used in conjunction with synchrotron x-ray radiation and high power optical lasers, the strong confinement afforded by such cells suggests novel applications at emerging high intensity x-ray facilities and new routes to studying thermodynamic equilibrium states of warm, very dense matter

Pressure-induced structural change in liquid GaIn eutectic alloy

Synchrotron x-ray diffraction reveals a pressure induced crystallization at about 3.4 GPa and apolymorphic transition near 10.3 GPa when compressed a liquid GaIn eutectic alloy up to ~13 GPa atroom temperature in a diamond anvil cell. Upon decompression, the high pressure crystalline phaseremains almost unchanged until it transforms to the liquid state at around 2.3 GPa. The ab initiomolecular dynamics calculations can reproduce the low pressure crystallization and give some hints onthe understanding of the transition between the liquid and the crystalline phase on the atomic level.The calculated pair correlation function g(r) shows a non-uniform contraction reflected by the differentcompressibility between the short (1st shell) and the intermediate (2nd to 4th shells). It is concludedthat the pressure-induced liquid-crystalline phase transformation likely arises from the changes in localatomic packing of the nearest neighbors as well as electronic structures at the transition pressure

Puget sound habitat status and trends monitoring program: nearshore and large river delta geospatial data and habitat status and trends monitoring metrics

The Puget Sound Habitat Status and Trends Monitoring (PSHSTM) program was developed to provide consistent salmon habitat status and trends data to support status reviews of Endangered Species Act (ESA) listed salmon populations across Puget Sound’s major population groups. Our approach primarily relies on readily available and regularly updated aerial imagery to consistently map key habitat features at a regional scale. We have developed a census-based approach to map key habitat features throughout the nearshore, large river delta, large river, and floodplain environments across Puget Sound. This presentation will focus on our mapping efforts in Puget Sound’s nearshore and large river delta environments, and the habitat status and trends metrics that will be derived from these efforts to support ESA listing reviews. In the nearshore environment, we are mapping overwater structures (e.g., docks, piers, bridges, buoys/floats, booms, aquaculture, and boat ramps), forested shoreline, and small embayment habitat features (e.g., lagoons, pocket estuaries, and blind tidal channels) for all ≈4,000 km of Puget Sound’s shoreline. In the large river delta environment, we are mapping tidal wetland areas, geomorphic delta boundaries, and channel features (e.g., distributaries and tidal channels) for all 17 large river deltas that drain into the Puget Sound, Hood Canal, and the Strait of Juan de Fuca. This census-based approach will provide a unique opportunity to develop consistent habitat status and trends metrics for habitat quantity and quality at a regional scale that can be used to inform ESA status reviews of listed salmon populations. We anticipate that the consistent regional-scale geospatial data sets developed from these efforts can be used to support a variety of other research and management needs

Stellar Populations in the Galactic Center

We discuss the stellar content of the Galactic Center, and in particular, recent estimates of the star formation rate (SFR). We discuss pros and cons of the different stellar tracers and focus our attention on the SFR based on the three classical Cepheids recently discovered in the Galactic Center. We also discuss stellar populations in field and cluster stars and present some preliminary results based on near-infrared photometry of a field centered on the young massive cluster Arches. We also provide a new estimate of the true distance modulus to the Galactic Center and we found 14.49$\pm$0.02(standard)$\pm$0.10(systematic) mag (7.91$\pm0.08\pm0.40$ kpc). Current estimate agrees quite well with similar photometric and kinematic distance determinations available in the literature. We also discuss the metallicity gradient of the thin disk and the sharp change in the slope when moving across the edge of the inner disk, the Galactic Bar and the Galactic Center. The difference becomes even more compelling if we take into account that metal abundances are based on young stellar tracers (classical Cepheids, Red Supergiants, Luminous Blue Variables). Finally, we briefly outline the possible mechanisms that might account for current empirical evidence.Comment: To be published in the Astrophysics and Space Science Proceeding