Investigating Dielectric Properties of Sintered Polymers for Rapid Manufacturing

Selective Laser Sintering (SLS) of polymers is the leading technology in the growing field of Rapid Manufacturing. High Speed Sintering (HSS) is a process that offers the potential to reduce costs and processing times and thus open significant new markets for Rapid Manufactured parts. Much academic research has been performed with respect to mechanical properties of Rapid Manufactured parts, however the area of electrical properties has received little attention to date. Electrical properties are obviously important in applications that will involve embedding of circuits with Rapid Manufactured 3D objects. However electrical properties are also important for a wide variety of electrical products where Rapid Manufactured parts can be used as housings etc. This paper focuses on the dielectric properties of parts made by SLS and HSS and compares properties with those for conventionally processed polymers. Dielectric strength results show that SLS parts are comparable with injection moulded parts, while HSS parts are inferior to SLS parts. Dielectric constant and dissipation factor results show that HSS parts are comparable with injection moulded parts, whilst SLS parts have superior properties. The presence of porosity (SLS and HSS) and the presence of carbon (HSS) are suggested as reasons behind the variation in dielectric properties when compared with injection moulded parts.Mechanical Engineerin

Core-level photoemission spectroscopy of nitrogen bonding in GaNxAs1–x alloys

The nitrogen bonding configurations in GaNxAs1–x alloys grown by molecular beam epitaxy with 0.07=0.03, the nitrogen is found to exist in a single bonding configuration – the Ga–N bond; no interstitial nitrogen complexes are present. The amount of nitrogen in the alloys is estimated from the XPS using the N 1s photoelectron and Ga LMM Auger lines and is found to be in agreement with the composition determined by x-ray diffraction

Degree of Cajal-Retzius cell mislocalisation correlates with the severity of structural brain defects in mouse models of dystroglycanopathy

The secondary dystroglycanopathies are characterized by the hypoglycosylation of alpha dystroglycan, and are associated with mutations in at least 18 genes that act on the glycosylation of this cell surface receptor rather than the Dag1 gene itself. At the severe end of the disease spectrum, there are substantial structural brain defects, the most striking of which is often cobblestone lissencephaly. The aim of this study was to determine the gene‐specific aspects of the dystroglycanopathy brain phenotype through a detailed investigation of the structural brain defects present at birth in three mouse models of dystroglycanopathy—the FKRPKD, which has an 80% reduction in Fkrp transcript levels; the Pomgnt1null, which carries a deletion of exons 7–16 of the Pomgnt1 gene; and the Largemyd mouse, which carries a deletion of exons 5–7 of the Large gene. We show a rostrocaudal and mediolateral gradient in the severity of brain lesions in FKRPKD, and to a lesser extent Pomgnt1null mice. Furthermore, the mislocalization of Cajal–Retzius cells is correlated with the gradient of these lesions and the severity of the brain phenotype in these models. Overall these observations implicate gene‐specific differences in the pathogenesis of brain lesions in this group of disorders

Magneto-optical study of thermally annealed InAs-InGaAs-GaAs self-assembled quantum dots

We report a magneto-optical study of InAs-InGaAs-GaAs self-assembled quantum dots (QDs) subjected to post-growth thermal annealing at different temperatures. At low temperatures annealing strongly affects the bimodal distribution of QDs; at higher temperatures a strong blueshift of the emission occurs. Magnetophotoluminescence reveals that the annealing increases the QD size, with a larger effect occurring along the growth axis, and decreases the carrier effective masses. The main contribution to the blueshift is deduced to be an increase in the average Ga composition of the QDs. The inadvertent annealing which occurs during the growth of the upper AlGaAs cladding layer in laser structures is also studied

Voltage controlled nuclear polarization switching in a single InGaAs quantum dot

Sharp threshold-like transitions between two stable nuclear spin polarizations are observed in optically pumped individual InGaAs self-assembled quantum dots embedded in a Schottky diode when the bias applied to the diode is tuned. The abrupt transitions lead to the switching of the Overhauser field in the dot by up to 3 Tesla. The bias-dependent photoluminescence measurements reveal the importance of the electron-tunneling-assisted nuclear spin pumping. We also find evidence for the resonant LO-phonon-mediated electron co-tunneling, the effect controlled by the applied bias and leading to the reduction of the nuclear spin pumping rate.Comment: 5 pages, 2 figures, submitted to Phys Rev

Separation of river network–scale nitrogen removal among the main channel and two transient storage compartments

Transient storage (TS) zones are important areas of dissolved inorganic nitrogen (DIN) processing in rivers. We assessed sensitivities regarding the relative impact that the main channel (MC), surface TS (STS), and hyporheic TS (HTS) have on network denitrification using a model applied to the Ipswich River in Massachusetts, United States. STS and HTS connectivity and size were parameterized using the results of in situ solute tracer studies in first‐ through fifth‐order reaches. DIN removal was simulated in all compartments for every river grid cell using reactivity derived from Lotic Intersite Nitrogen Experiment (LINX2) studies, hydraulic characteristics, and simulated discharge. Model results suggest that although MC‐to‐STS connectivity is greater than MC‐to‐HTS connectivity at the reach scale, at basin scales, there is a high probability of water entering the HTS at some point along its flow path through the river network. Assuming our best empirical estimates of hydraulic parameters and reactivity, the MC, HTS, and STS removed approximately 38%, 21%, and 14% of total DIN inputs during a typical base flow period, respectively. There is considerable uncertainty in many of the parameters, particularly the estimates of reaction rates in the different compartments. Using sensitivity analyses, we found that the size of TS is more important for DIN removal processes than its connectivity with the MC when reactivity is low to moderate, whereas TS connectivity is more important when reaction rates are rapid. Our work suggests a network perspective is needed to understand how connectivity, residence times, and reactivity interact to influence DIN processing in hierarchical river systems

Excessive growth hormone expression in male GH transgenic mice adversely alters bone architecture and mechanical strength

Patients with acromegaly have a higher prevalence of vertebral fractures despite normal bone mineral density (BMD), suggesting that GH overexpression has adverse effects on skeletal architecture and strength. We used giant bovine GH (bGH) transgenic mice to analyze the effects of high serum GH levels on BMD, architecture, and mechanical strength. Five-month-old hemizygous male bGH mice were compared with age- and sex-matched nontransgenic littermates controls (NT; n=16/group). Bone architecture and BMD were analyzed in tibia and lumbar vertebrae using microcomputed tomography. Femora were tested to failure using three-point bending and bone cellular activity determined by bone histomorphometry. bGH transgenic mice displayed significant increases in body weight and bone lengths. bGH tibia showed decreases in trabecular bone volume fraction, thickness, and number compared with NT ones, whereas trabecular pattern factor and structure model index were significantly increased, indicating deterioration in bone structure. Although cortical tissue perimeter was increased in transgenic mice, cortical thickness was reduced. bGH mice showed similar trabecular BMD but reduced trabecular thickness in lumbar vertebra relative to controls. Cortical BMD and thickness were significantly reduced in bGH lumbar vertebra. Mechanical testing of femora confirmed that bGH femora have decreased intrinsic mechanical properties compared with NT ones. Bone turnover is increased in favor of bone resorption in bGH tibia and vertebra compared with controls, and serum PTH levels is also enhanced in bGH mice. These data collectively suggest that high serum GH levels negatively affect bone architecture and quality at multiple skeletal sites

Digging supplementary buried channels: investigating the notch architecture within the CCD pixels on ESA's Gaia satellite

The European Space Agency (ESA) Gaia satellite has 106 CCD image sensors which will suffer from increased charge transfer inefficiency (CTI) as a result of radiation damage. To aid the mitigation at low signal levels, the CCD design includes Supplementary Buried Channels (SBCs, otherwise known as `notches') within each CCD column. We present the largest published sample of Gaia CCD SBC Full Well Capacity (FWC) laboratory measurements and simulations based on 13 devices. We find that Gaia CCDs manufactured post-2004 have SBCs with FWCs in the upper half of each CCD that are systematically smaller by two orders of magnitude (<50 electrons) compared to those manufactured pre-2004 (thousands of electrons). Gaia's faint star (13 < G < 20 mag) astrometric performance predictions by Prod'homme et al. and Holl et al. use pre-2004 SBC FWCs as inputs to their simulations. However, all the CCDs already integrated onto the satellite for the 2013 launch are post-2004. SBC FWC measurements are not available for one of our five post-2004 CCDs but the fact it meets Gaia's image location requirements suggests it has SBC FWCs similar to pre-2004. It is too late to measure the SBC FWCs onboard the satellite and it is not possible to theoretically predict them. Gaia's faint star astrometric performance predictions depend on knowledge of the onboard SBC FWCs but as these are currently unavailable, it is not known how representative of the whole focal plane the current predictions are. Therefore, we suggest Gaia's initial in-orbit calibrations should include measurement of the onboard SBC FWCs. We present a potential method to do this. Faint star astrometric performance predictions based on onboard SBC FWCs at the start of the mission would allow satellite operating conditions or CTI software mitigation to be further optimised to improve the scientific return of Gaia.Comment: Accepted for publication in MNRAS, 16 pages, 19 figure

Vegetation height products between 60° S and 60° N from ICESat GLAS data.

We present new coarse resolution (0.5� ×0.5�)vegetation height and vegetation-cover fraction data sets between 60� S and 60� N for use in climate models and ecological models. The data sets are derived from 2003–2009 measurements collected by the Geoscience Laser Altimeter System (GLAS) on the Ice, Cloud and land Elevation Satellite (ICESat), the only LiDAR instrument that provides close to global coverage. Initial vegetation height is calculated from GLAS data using a development of the model of Rosette et al. (2008) with further calibration on desert sites. Filters are developed to identify and eliminate spurious observations in the GLAS data, e.g. data that are affected by clouds, atmosphere and terrain and as such result in erroneous estimates of vegetation height or vegetation cover. Filtered GLAS vegetation height estimates are aggregated in histograms from 0 to 70m in 0.5m intervals for each 0.5�×0.5�. The GLAS vegetation height product is evaluated in four ways. Firstly, the Vegetation height data and data filters are evaluated using aircraft LiDAR measurements of the same for ten sites in the Americas, Europe, and Australia. Application of filters to the GLAS vegetation height estimates increases the correlation with aircraft data from r =0.33 to r =0.78, decreases the root-mean-square error by a factor 3 to about 6m (RMSE) or 4.5m (68% error distribution) and decreases the bias from 5.7m to −1.3 m. Secondly, the global aggregated GLAS vegetation height product is tested for sensitivity towards the choice of data quality filters; areas with frequent cloud cover and areas with steep terrain are the most sensitive to the choice of thresholds for the filters. The changes in height estimates by applying different filters are, for the main part, smaller than the overall uncertainty of 4.5–6m established from the site measurements. Thirdly, the GLAS global vegetation height product is compared with a global vegetation height product typically used in a climate model, a recent global tree height product, and a vegetation greenness product and is shown to produce realistic estimates of vegetation height. Finally, the GLAS bare soil cover fraction is compared globally with the MODIS bare soil fraction (r = 0.65) and with bare soil cover fraction estimates derived from AVHRR NDVI data (r =0.67); the GLAS treecover fraction is compared with the MODIS tree-cover fraction (r =0.79). The evaluation indicates that filters applied to the GLAS data are conservative and eliminate a large proportion of spurious data, while only in a minority of cases at the cost of removing reliable data as well. The new GLAS vegetation height product appears more realistic than previous data sets used in climate models and ecological models and hence should significantly improve simulations that involve the land surface