48,181 research outputs found
Coherent Diffractive Imaging Using Randomly Coded Masks
Coherent diffractive imaging (CDI) provides new opportunities for high
resolution X-ray imaging with simultaneous amplitude and phase contrast.
Extensions to CDI broaden the scope of the technique for use in a wide variety
of experimental geometries and physical systems. Here, we experimentally
demonstrate a new extension to CDI that encodes additional information through
the use of a series of randomly coded masks. The information gained from the
few additional diffraction measurements removes the need for typical
object-domain constraints; the algorithm uses prior information about the masks
instead. The experiment is performed using a laser diode at 532.2 nm, enabling
rapid prototyping for future X-ray synchrotron and even free electron laser
experiments. Diffraction patterns are collected with up to 15 different masks
placed between a CCD detector and a single sample. Phase retrieval is performed
using a convex relaxation routine known as "PhaseCut" followed by a variation
on Fienup's input-output algorithm. The reconstruction quality is judged via
calculation of phase retrieval transfer functions as well as by an object-space
comparison between reconstructions and a lens-based image of the sample. The
results of this analysis indicate that with enough masks (in this case 3 or 4)
the diffraction phases converge reliably, implying stability and uniqueness of
the retrieved solution
Part 1: a process view of nature. Multifunctional integration and the role of the construction agent
This is the first of two linked articles which draw s on emerging understanding in the field of biology and seeks to communicate it to those of construction, engineering and design. Its insight is that nature 'works' at the process level, where neither function nor form are distinctions, and materialisation is both the act of negotiating limited resource and encoding matter as 'memory', to sustain and integrate processes through time. It explores how biological agents derive work by creating 'interfaces' between adjacent locations as membranes, through feedback. Through the tension between simultaneous aggregation and disaggregation of matter by agents with opposing objectives, many functions are integrated into an interface as it unfolds. Significantly, biological agents induce flow and counterflow conditions within biological interfaces, by inducing phase transition responses in the matte r or energy passing through them, driving steep gradients from weak potentials (i.e. shorter distances and larger surfaces). As with biological agents, computing, programming and, increasingly digital sensor and effector technologies share the same 'agency' and are thus convergent
Integrating heterogeneous distributed COTS discrete-event simulation packages: An emerging standards-based approach
This paper reports on the progress made toward the emergence of standards to support the integration of heterogeneous discrete-event simulations (DESs) created in specialist support tools called commercial-off-the-shelf (COTS) discrete-event simulation packages (CSPs). The general standard for heterogeneous integration in this area has been developed from research in distributed simulation and is the IEEE 1516 standard The High Level Architecture (HLA). However, the specific needs of heterogeneous CSP integration require that the HLA is augmented by additional complementary standards. These are the suite of CSP interoperability (CSPI) standards being developed under the Simulation Interoperability Standards Organization (SISO-http://www.sisostds.org) by the CSPI Product Development Group (CSPI-PDG). The suite consists of several interoperability reference models (IRMs) that outline different integration needs of CSPI, interoperability frameworks (IFs) that define the HLA-based solution to each IRM, appropriate data exchange representations to specify the data exchanged in an IF, and benchmarks termed CSP emulators (CSPEs). This paper contributes to the development of the Type I IF that is intended to represent the HLA-based solution to the problem outlined by the Type I IRM (asynchronous entity passing) by developing the entity transfer specification (ETS) data exchange representation. The use of the ETS in an illustrative case study implemented using a prototype CSPE is shown. This case study also allows us to highlight the importance of event granularity and lookahead in the performance and development of the Type I IF, and to discuss possible methods to automate the capture of appropriate values of lookahead
Direct numerical simulation of gas transfer across the air-water interface driven by buoyant convection
A series of direct numerical simulations of mass transfer across the air-water interface driven by buoyancy-induced convection has been carried out to elucidate the physical mechanisms that play a role in the transfer of heat and atmospheric gases. The buoyant instability is caused by the presence of a thin layer of cold water situated on top of a body of warm water. In time, heat and atmospheric gases diff use into the uppermost part of the thermal boundary layer and are subsequently transported down into the bulk by falling sheets and plumes of cold water. Using a specifically-designed numerical code for the discretization of scalar convection and diffusion, it was possible to accurately resolve this buoyant instability induced transport of atmospheric gases into the bulk at a realistic Prandtl number (Pr = 6) and Schmidt numbers ranging from Sc = 20 to Sc = 500. The simulations presented here provided a detailed insight into instantaneous gas transfer processes. The falling plumes with highly gas-saturated fluid in their core were found to penetrate deep inside the bulk. With an initial temperature difference between the water surface and the bulk of slightly above 2 K peaks in the instantaneous heat flux in excess of 1600 W/m² were observed, proving the potential effectiveness of buoyant convective heat and gas transfer. Furthermore, the validity of the scaling law for the ratio of gas and heat transfer velocities K_L / H_L ∼ (Pr/Sc)^0:5 for the entire range of Schmidt numbers considered was confirmed. A good time-accurate approximation of K_L was found using surface information such as velocity fluctuations and convection cell size or surface divergence. A reasonable time-accuracy for the K_L estimation was obtained using the horizontal integral length scale and the root-mean-square of the horizontal velocity fluctuations in the upper part of the bulk.The German Research Foundation (DFG grant UH242/6-1). Additional funding by the Helmholtz Water Network
Origin of Radio Emission from Nearby Low-Luminosity Active Galactic Nuclei
We use the observational data in radio, optical and X-ray wavebands, for a
sample of active galactic nuclei (AGNs) with measured black hole masses, to
explore the origin of radio emission from nearby low-luminosity active galactic
nuclei (LLAGNs). We find that the radio luminosities are higher than the
maximal luminosities expected from the ADAF model, for most sources in this
sample. This implies that the radio emission is dominantly from the jets in
these sources. The radio emission from a small fraction of the sources in this
sample can be explained by the ADAF model. However, comparing the observed
multi-band emission data with the spectra calculated for the ADAF or ADIOS
cases, we find that neither ADAF nor ADIOS models can reproduce the observed
multi-band emission simultaneously, with reasonable magnetic field strengths,
for these radio-weak sources. A variety of other possibilities are discussed,
and we suggest that the radio emission is probably dominated by jet emission
even in these radio-weak LLAGNs.Comment: 25 pages, some references were added, accepted for publication in Ap
Effects of Chemical Feedbacks on Decadal Methane Emissions Estimates
The coupled chemistry of methane, carbon monoxide (CO), and hydroxyl radical (OH) can modulate methane's 9‐year lifetime. This is often ignored in methane flux inversions, and the impacts of neglecting interactive chemistry have not been quantified. Using a coupled‐chemistry box model, we show that neglecting the effect of methane source perturbation on [OH] can lead to a 25% bias in estimating abrupt changes in methane sources after only 10 years. Further, large CO emissions, such as from biomass burning, can increase methane concentrations by extending the methane lifetime through impacts on [OH]. Finally, we quantify the biases of including (or excluding) coupled chemistry in the context of recent methane and CO trends. Decreasing CO concentrations, beginning in the 2000's, have notable impacts on methane flux inversions. Given these nonnegligible errors, decadal methane emissions inversions should incorporate chemical feedbacks for more robust methane trend analyses and source attributions
NASA's AVE 7 experiment: 25-mb sounding data
The AVE 7 Experiment is described and tabulated rawinsonde data at 25 mb internals from the surface to 25 mb for the 24 stations participating in the experiment are presented. Soundings were taken between 0000GMT May 2 and 1200 GMT May 3, 1978. The methods of data processing and the accuracy are briefly discussed. Selected synoptic charts prepared from the data are presented as well as an example of contact data. A tabulation of adverse weather events that occured during the AVE 7 period, including freezing temperature, snow, tornadoes, damaging winds, and flooding, is presented
- …