1,253 research outputs found

    Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts

    Get PDF
    In current research, more and more attention is paid to the understanding of residual stress states as well as the application of targeted residual stresses to extend e.g. life time or stiffness of a part. In course of that, the numerical simulation and analysis of the forming process of components, which goes along with the evolution of residual stresses, play an important role. In this contribution, we focus on the residual stresses arising from the austenite-to-martensite transformation at microscopic and mesoscopic level of a Cr-alloyed steel. A combination of a Multi-Phase-Field model and a two-scale Finite Element simulation is utilized for numerical analysis. A first microscopic simulation considers the lattice change, such that the results can be homogenized and applied on the mesoscale. Based on this result, a polycrystal consisting of a certain number of austenitic grains is built and the phase transformation from austenite to martensite is described with respect to the mesoscale. Afterwards, in a two-scale Finite Element simulation the plastic effects are considered and resulting residual stress states are computed

    On the capacity and normalisation of ISI channels

    Get PDF
    [Abstract]: We investigate the capacity of various ISI channels with additive white Gaussian noise. Previous papers showed a minimum Eb/N0 of −4.6 dB, 3 dB below the capacity of a flat channel, is obtained using the water-pouring capacity formulas for the 1 + D channel. However, these papers did not take into account that the channel power gain can be greater than unity when water-pouring is used. We present a generic power normalization method of the channel frequency response, namely peak bandwidth normalisation, to facilitate the fair capacity comparison of various ISI channels. Three types of ISI channel, i.e., adder channels, RC channels and magnetic recording channels, are examined. By using our channel power gain normalization, the capacity curves of these ISI channels are shown

    Untitled

    Get PDF

    Optimalisatie bemesting Van Strien: Voortgang 2014

    Get PDF
    Dit rapport bevat de resultaten van het vierde jaar van het project "Bedrijfsinterne Optimalisatie", en wel van het deelproject "Van Strien". Op diverse percelen zijn metingen uitgevoerd aan de bodem om de stikstof werking van maaimeststoffen in beeld te krijgen. Op perceel 1A (aardappelen in 2014) heeft de strook met maaimeststoffen 2,3 maal zo veel stikstof gekregen als de bedoeling was, als gevolg van een twee maal zo hoog drogestofgehalte als vooraf was ingeschat. Dit was echter niet terug te vinden in de gemeenten hoeveelheden N-mineraal in de bodem en in de gehele strook met maaimeststoffen was de opbrengst lager dan bij de standaard bemesting. Door een vroege Phytophthora aantasting moest er vroeg gebrand worde. Daardoor waren de opbrengsten zeer laag. Mogelijk is in de proefstrook door de hoge bemesting de knolzetting vertraagd (later gewastype) waardoor op het moment van loofdoding de opbrengstvorming nog niet goed op gang was gekomen. Op perceel 3 (grasklaver in 2014) zijn de metingen afgebroken nadat per abuis het gehele perceel, inclusief de proefstroken met maaimeststof, een bemesting met drijfmest had gekregen

    Bemesting met maaimeststoffen bij Van Strien - Samenvattend eindrapport 2011 - 2015

    Get PDF
    In dit rapport worden de samenvattende resultaten beschreven van vier jaar veldonderzoek naar bemesting met maaimeststoffen vergeleken met bemesting met dierlijke mest. Maaimeststoffen zijn gewassen, in de regel vlinderbloemigen, die worden gemaaid, en vervolgens als plantaardige meststof worden ingezet op een ander perceel dan waar ze geteeld zijn. Voor het akkerbouwbedrijf van Joost van Strien is een bedrijfsontwerp gemaakt, gebaseerd stikstofvoorziening door maaimeststoffen (grasklaver en luzerne). Dit ontwerp is vervolgend in vier veldjaren in de praktijk getoetst en vergeleken met een standaard bemesting met dierlijke mest. Het blijkt goed mogelijk te zijn om bij meerdere gewassen de stikstofvoorziening met maaimeststoffen te verzorgen zonder daarbij opbrengst in te leveren. Bijvoorbeeld bij aardappelen, granen, spinazie, suikermais, kool. Wel is het belangrijk om de maaimeststoffen tijdig uit te brengen, om de mineralisatieprocessen (=het bodemleven) voldoende tijd te geven de stikstof die erin gebonden is vrij te maken. Ook zijn maaimeststoffen meer dan andere (dierlijke) mineralenbronnen gevoelig voor droge perioden waarin de mineralisatie geremd is. Met name in gewassen met een korte groeicyclus (spinazie) of gewassen die in een bepaalde groeifase gevoelig zijn voor de hoeveelheid beschikbare stikstof (tarwe) kan dat voor problemen zorgen. Op bedrijfsniveau kan de interne stikstofhuishouding grotendeels gevoed worden door stikstofbinding uit de lucht, en kan de verdere aanvoer van stikstof van buiten het bedrijf tot een minimum beperkt worden. Na vier jaar toepassing van maaimeststoffen op hetzelfde perceel zijn de effecten op de bodemkwaliteit beperkt. In een aantal analyses is de trend te zien dat maaimeststoffen leiden tot een actiever bodemleven en een betere bodemkwaliteit, maar de omvang van deze verbetering is na vier seizoenen nog niet groot

    Over warmte, gezelligheid en ontspanning: positieve veiligheid in stedelijke uitgaansgebieden

    Get PDF
    Criminal Justice: Legitimacy, accountability, and effectivit

    Portfolio Concentration and Investment Performance

    Get PDF
    This study examines the relationship between investment performance and concentration in active equity portfolios. Active management is dependent on the success of two important components in the investment process – stock selection skill and portfolio management. Our study documents a positive relationship between fund performance and portfolio concentration. The relationship is stronger for stocks in which active managers hold overweight positions, as well as for stocks outside the largest 50 stocks listed on the Australian Stock Exchange (ASX). We find more concentrated funds tend to be those implementing growth styles, having smaller aggregate assets under management, being institutions which are not affiliated with a bank or life-office entity, whose funds experience past period outflows, and who are benchmarked to narrower indexes than the S&P/ASX 300

    Sensitivity analysis of statistical measures for the reconstruction of microstructures based on the minimization of generalized least-square functionals

    Get PDF
    For the simulation of micro-heterogeneous materials the FE2-method provides incorporation of the mechanical behavior at the microscale in a direct manner by taking into account a microscopic boundary value problem based on a representative volume element (RVE). A main problem of this approach is the high computational cost, when we have to deal with RVEs that are characterized by a complex geometry of the individual constituents. This leads to a large number of degrees of freedom and history variables at the microscale which needs a large amount of memory, not to mention the high computation time. Therefore, methods that reduce the complexity of such RVEs play an important role for efficient direct micro-macro transition procedures. In this contribution we focus on random matrix-inclusion microstructures and analyze several statistical measures with respect to their influence on the characterization of the inclusion phase morphology. For this purpose we apply the method proposed in Balzani and Schr¨oder (2008); Balzani et al. (2009a), where an objective function is minimized which takes into account differences between statistical measures computed for the original binary image of a given real microstructure and a simplified statistically similar representative volume element (SSRVE). The analysis with respect to the capability of the resulting SSRVEs to reflect the mechanical response in some simple independent virtual experiments allows for an estimation of the importance of the investigated statistical measures

    Cameratoezicht, veiligheid en een frisdrank-reclame

    Get PDF
    In toenemende mate ligt er nadruk op onveiligheid en inzet van toezicht- en controlemaatregelen in het hedendaagse straatbeeld. Deze ontwikkelingen kunnen het gevoel van veiligheid, maar juist ook onveiligheid in de hand werken. Aan de hand van camerabeelden beargumenteert Brands dat die positieve waarden en ervaringen van toezicht niet vergeten moeten worden.Criminal Justice: Legitimacy, accountability, and effectivit

    Agonist-induced modulation of glycocalyx barrier properties in the microcirculation : role in blood volume recruitment and oxygen exchange in the heart

    Get PDF
    This dissertation research studies the role of the glycocalyx, a gel layer on the inside of all blood vessels in the heart. The glycocalyx turns out to behave as a thick non-stick layer that prevents damaging parts to stick to the wall and as an extra space for blood when more oxygen needs to be transported from the blood to the heart. Temporary adjustments of this layer appear to positively influence the blood and oxygen supply, but when this layer is damaged, that does not happen. Repair of a damaged glycocalyx could in the future be a possible therapy for patients suffering from chest pain
    corecore