10,915 research outputs found
Zero leakage design for ducts and tube connections for deep space travel. Volume 5 - Tube connector design principles and evaluation Final report, 5 Jul. 1963 - 30 Jun. 1967
Principles of connector testing, design evaluation of commercial connectors, and assessment of design rules for threaded connector
CFD Mixing Analysis of Jets Injected from Straight and Slanted Slots into Confined Crossflow in Rectangular Ducts
A CFD study was performed to analyze the mixing potential of opposed rows of staggered jets injected into confined crossflow in a rectangular duct. Three jet configurations were numerically tested: (1) straight (0 deg) slots; (2) perpendicular slanted (45 deg) slots angled in opposite directions on top and bottom walls; and (3) parallel slanted (45 deg) slots angled in the same direction on top and bottom walls. All three configurations were tested at slot spacing-to-duct height ratios (S/H) of 0.5, 0.75, and 1.0; a jet-to-mainstream momentum flux ratio (J) of 100; and a jet-to-mainstream mass flow ratio of 0.383. Each configuration had its best mixing performance at S/H of 0.75. Asymmetric flow patterns were expected and predicted for all slanted slot configurations. The parallel slanted slot configuration was the best overall configuration at x/H of 1.0 for S/H of 0.75
Handbook for Learning-centred evaluation of Computer-facilitated learning projects in higher education
This handbook supports a project funded by the Australian Government Committee for University Teaching and Staff Development (CUTSD). The amended project title is âStaff Development in Evaluation of Technology-based Teaching Development Projects: An Action Inquiry Approachâ.
The project is hosted by Murdoch University on behalf of the Australasian Society for Computers in Learning in Tertiary Education (ASCILITE), as a consortium of 11 universities.
The rationale of the project is to guide a group of university staff through the evaluation of a Computer-facilitated Learning (CFL1) project by a process of action inquiry and mentoring, supported by the practical and theoretical material contained in this handbook
CFD mixing analysis of axially opposed rows of jets injected into confined crossflow
A computational fluid dynamics (CFD) parametric study was performed to analyze axially opposed rows of jets mixing with crossflow in a rectangular duct. Isothermal analysis was conducted to determine the influence of lateral geometric arrangement on mixing. Two lateral arrangements were analyzed: (1) inline (jets' centerlines aligned with each other on top and bottom walls), and (2) staggered (jets' centerlines offset with each other on top and bottom walls). For a jet-to-mainstream mass flow ratio (MR) of 2.0, design parameters were systematically varied for jet-to-mainstream momentum-flux ratios (J) between 16 and 64 and orifice spacing-to-duct height ratios (S/H) between 0.125 and 1.5. Comparisons were made between geometries optimized for S/H at a specified J. Inline configurations had a unique spacing for best mixing at a specified J. In contrast, staggered configurations had two 'good mixing' spacings for each J, one corresponding to optimum inline spacing and the other corresponding to optimum non-impinging jet spacing. The inline configurations, due to their smaller orifice size at optimum S/H, produced better initial mixing characteristics. At downstream locations (e.g. x/H of 1.5), the optimum non-impinging staggered configuration produced better mixing than the optimum inline configuration for J of 64; the opposite results were observed for J of 16. Increasing J resulted in better mixing characteristics if each configuration was optimized with respect to orifice spacing. Mixing performance was shown to be similar to results from previous dilution jet mixing investigations (MR less than 0.5)
The Position of the Intellectual in the 1950s: Case Studies of J. D. Salinger and Ayn Rand
The purpose ofthis study was to examine the historical and social factors that influenced American intellectual life in the 1950s, and to apply these broader, cultural influences to case studies on two American writers working in the 1950s: J. D. Salinger and Ayn Rand. Research involved diverse readings in biography and literary criticism concerning the two authors as well as interpretation ofthe authors\u27 works themselves.
Despite having opposing philosophical, aesthetic, and intellectual ideals, J. D. Salinger and Ayn Rand typify the position ofthe intellectual in the 1950s because they share the conflicting needs ofacceptance and superiority. While the two authors define intelligence in radically different ways, both attempt to escape the existential crisis of post-war life by offering solutions to the intellectuals\u27 unique dilemma that emphasize intellectuals\u27 roles as artists and economic producers
Fecal contamination of drinking-water in low- and middle-income countries: a systematic review and meta-analysis
Background: access to safe drinking-water is a fundamental requirement for good health and is also a human right. Global access to safe drinking-water is monitored by WHO and UNICEF using as an indicator âuse of an improved source,â which does not account for water quality measurements. Our objectives were to determine whether water from âimprovedâ sources is less likely to contain fecal contamination than âunimprovedâ sources and to assess the extent to which contamination varies by source type and setting.Methods and findings: studies in Chinese, English, French, Portuguese, and Spanish were identified from online databases, including PubMed and Web of Science, and grey literature. Studies in low- and middle-income countries published between 1990 and August 2013 that assessed drinking-water for the presence of Escherichia coli or thermotolerant coliforms (TTC) were included provided they associated results with a particular source type. In total 319 studies were included, reporting on 96,737 water samples. The odds of contamination within a given study were considerably lower for âimprovedâ sources than âunimprovedâ sources (odds ratio [OR] = 0.15 [0.10â0.21], I2 = 80.3% [72.9â85.6]). However over a quarter of samples from improved sources contained fecal contamination in 38% of 191 studies. Water sources in low-income countries (OR = 2.37 [1.52â3.71]; p<0.001) and rural areas (OR = 2.37 [1.47â3.81] p<0.001) were more likely to be contaminated. Studies rarely reported stored water quality or sanitary risks and few achieved robust random selection. Safety may be overestimated due to infrequent water sampling and deterioration in quality prior to consumption.Conclusion: access to an âimproved sourceâ provides a measure of sanitary protection but does not ensure water is free of fecal contamination nor is it consistent between source types or settings. International estimates therefore greatly overstate use of safe drinking-water and do not fully reflect disparities in access. An enhanced monitoring strategy would combine indicators of sanitary protection with measures of water qualit
In re Associated Sign & Post, Inc.: The Affirmative Action Obligations of Government Contractors in Indiana
Tolerance Regions For A Joint Exponential Distribution
The evaluation of the reliability of a system of components, when the components are assumed to follow a joint exponential distribution, is considered. The approach used is to develop tolerance regions for the joint exponential distribution or to estimate the probability content of the appropriate specification region. Copyright Š 1968 by The Institute of Electrical and Electronics Engineers, Inc
- âŚ