Study on the electrochromic properties of polypyrrole layers doped with different dye molecules

Altres ajuts: Acord transformatiu CRUE-CSICThree dye molecules (Dye) of Acid Brilliant Scarlet 3R (AR18), Amido Naphthol Red G (AR1), Indigo Carmine (IC), as well as sodium dodecyl sulfate (SDS) as dopant agents were used for electrochemical synthesis of polypyrrole (PPy) layers onto indium doped tin oxide (ITO) coated polyethylene terephthalate (PET) electrode. The morphology, electrochemical, optical, and spectroelectrochemical properties of the layers were investigated. The study of the electrochemical behavior showed that the presence of each AR18, AR1, or IC with SDS, had shown an excellent synergistic effect on the electrochemical stability of layers. The morphological characterization of the PPy/dopant(s) using atomic force microscopy (AFM) showed that the surface roughness in the PPy/IC-SDS layer was 39% and 32% less than the PPy/AR18-SDS and PPy/AR1-SDS, respectively. The absorption spectrum of PPy/dopant(s) in the UV-Vis-NIR wavelength range showed the formation of polaron and bipolaron in PPy chains. Also, the optical bandgap energy of PPy/dopant(s) decreased, and the fully doped state in all PPy films was observed. Spectroelectrochemical properties of the films showed that the simultaneous use of each dye molecule and the surfactant as dopant in PPy layers demonstrated proper electrochemical and optical stability and satisfactory electrochromic parameters. For example, the color contrast of PPy/AR18-SDS was 50%, while this parameter in control sample (PPy doped with lithium perchlorate) was 21%. Also, the cathodic and anodic coloration efficiency showed a 6-fold increase in PPy/Dye-SDS compared to PPy/ClO . In general, according to the results it is likely that by increasing the number of anion groups in the dye molecules and decreasing their dimensions as dopant agents, the electrochemical and electrochromic properties of the resultant layer would be improved

Study on the electrochromic properties of polypyrrole layers doped with different dye molecules

Three dye molecules (Dye) of Acid Brilliant Scarlet 3R (AR18), Amido Naphthol Red G (AR1), Indigo Carmine (IC), as well as sodium dodecyl sulfate (SDS) as dopant agents were used for electrochemical synthesis of polypyrrole (PPy) layers onto indium doped tin oxide (ITO) coated polyethylene terephthalate (PET) electrode. The morphology, electrochemical, optical, and spectroelectrochemical properties of the layers were investigated. The study of the electrochemical behavior showed that the presence of each AR18, AR1, or IC with SDS, had shown an excellent synergistic effect on the electrochemical stability of layers. The morphological characterization of the PPy/dopant(s) using atomic force microscopy (AFM) showed that the surface roughness in the PPy/IC-SDS layer was 39% and 32% less than the PPy/AR18-SDS and PPy/AR1-SDS, respectively. The absorption spectrum of PPy/dopant(s) in the UV–Vis-NIR wavelength range showed the formation of polaron and bipolaron in PPy chains. Also, the optical bandgap energy of PPy/dopant(s) decreased, and the fully doped state in all PPy films was observed. Spectroelectrochemical properties of the films showed that the simultaneous use of each dye molecule and the surfactant as dopant in PPy layers demonstrated proper electrochemical and optical stability and satisfactory electrochromic parameters. For example, the color contrast of PPy/AR18-SDS was 50%, while this parameter in control sample (PPy doped with lithium perchlorate) was 21%. Also, the cathodic and anodic coloration efficiency showed a 6-fold increase in PPy/Dye-SDS compared to PPy/ClO4-. In general, according to the results it is likely that by increasing the number of anion groups in the dye molecules and decreasing their dimensions as dopant agents, the electrochemical and electrochromic properties of the resultant layer would be improved.Peer ReviewedPostprint (author's final draft

Electrochromic self-electrostabilized polypyrrole films doped with surfactant and Azo Dye

Two azo dyes, acid red 1 (AR1) and acid red 18 (AR18), were used alone or in combination with sodium dodecyl sulfate (SDS) for the electropolymerization of a pyrrole monomer. Polypyrrole (PPy) showed higher redox capacity when SDS and AR18 were used simultaneously as dopant agents (PPy/AR18-SDS) than when the conducting polymer was produced in the presence of SDS, AR18, AR1, or an AR1/SDS mixture. Moreover, PPy/AR18-SDS is a self-stabilizing material that exhibits increasing electrochemical activity with the number of oxidation-reduction cycles. A mechanism supported by scanning electron microscopy and X-ray diffraction structural observations was proposed to explain the synergy between the SDS surfactant and the AR18 dye. On the other hand, the Bordeaux red color of PPy/AR18-SDS, which exhibits an optical band gap of 1.9 eV, rapidly changed to orange-yellow and blue colors when films were reduced and oxidized, respectively, by applying linear or step potential ramps. Overall, the results indicate that the synergistic utilization of AR18 and SDS as dopant agents in the same polymerization reaction is a very successful and advantageous strategy for the preparation of PPy films with cutting-edge electrochemical and electrochromic properties

Electrochromic self-electrostabilized polypyrrole films doped with surfactant and Azo Dye

Two azo dyes, acid red 1 (AR1) and acid red 18 (AR18), were used alone or in combination with sodium dodecyl sulfate (SDS) for the electropolymerization of a pyrrole monomer. Polypyrrole (PPy) showed higher redox capacity when SDS and AR18 were used simultaneously as dopant agents (PPy/AR18-SDS) than when the conducting polymer was produced in the presence of SDS, AR18, AR1, or an AR1/SDS mixture. Moreover, PPy/AR18-SDS is a self-stabilizing material that exhibits increasing electrochemical activity with the number of oxidation-reduction cycles. A mechanism supported by scanning electron microscopy and X-ray diffraction structural observations was proposed to explain the synergy between the SDS surfactant and the AR18 dye. On the other hand, the Bordeaux red color of PPy/AR18-SDS, which exhibits an optical band gap of 1.9 eV, rapidly changed to orange-yellow and blue colors when films were reduced and oxidized, respectively, by applying linear or step potential ramps. Overall, the results indicate that the synergistic utilization of AR18 and SDS as dopant agents in the same polymerization reaction is a very successful and advantageous strategy for the preparation of PPy films with cutting-edge electrochemical and electrochromic properties

Electrochromic self-electrostabilized polypyrrole films doped with surfactant and azo dye

Two azo dyes, acid red 1 (AR1) and acid red 18 (AR18), were used alone or in combination with sodium dodecyl sulfate (SDS) for the electropolymerization of a pyrrole monomer. Polypyrrole (PPy) showed higher redox capacity when SDS and AR18 were used simultaneously as dopant agents (PPy/AR18-SDS) than when the conducting polymer was produced in the presence of SDS, AR18, AR1, or an AR1/SDS mixture. Moreover, PPy/AR18-SDS is a self-stabilizing material that exhibits increasing electrochemical activity with the number of oxidation-reduction cycles. A mechanism supported by scanning electron microscopy and X-ray diffraction structural observations was proposed to explain the synergy between the SDS surfactant and the AR18 dye. On the other hand, the Bordeaux red color of PPy/AR18-SDS, which exhibits an optical band gap of 1.9 eV, rapidly changed to orange-yellow and blue colors when films were reduced and oxidized, respectively, by applying linear or step potential ramps. Overall, the results indicate that the synergistic utilization of AR18 and SDS as dopant agents in the same polymerization reaction is a very successful and advantageous strategy for the preparation of PPy films with cutting-edge electrochemical and electrochromic properties.Peer Reviewe