176 research outputs found
Serum Interleukin (IL)-23 and IL-17 Profile in Inflammatory Bowel Disease (IBD) Patients Could Differentiate between Severe and Non-Severe Disease
Probing the molecular architecture of Arabidopsis thaliana secondary cell walls using two- and three-dimensional (13)C solid state nuclear magnetic resonance spectroscopy.
The plant secondary cell wall is a thickened polysaccharide and phenolic structure, providing mechanical strength to cells, particularly in woody tissues. It is the main feedstock for the developing bioenergy and green chemistry industries. Despite the role that molecular architecture (the arrangement of biopolymers relative to each other, and their conformations) plays in dictating biomass properties, such as recalcitrance to breakdown, it is poorly understood. Here, unprocessed dry (13)C-labeled stems from the model plant Arabidopsis thaliana were analyzed by a variety of (13)C solid state magic angle spinning nuclear magnetic resonance methods, such as one-dimensional cross-polarization and direct polarization, two-dimensional refocused INADEQUATE, RFDR, PDSD, and three-dimensional DARR, demonstrating their viability for the study of native polymer arrangements in intact secondary cell walls. All carbon sites of the two main glucose environments in cellulose (previously assigned to microfibril surface and interior residues) are clearly resolved, as are carbon sites of the other major components of the secondary cell wall: xylan and lignin. The xylan carbon 4 chemical shift is markedly different from that reported previously for solution or primary cell wall xylan, indicating significant changes in the helical conformation in these dried stems. Furthermore, the shift span indicates that xylan adopts a wide range of conformations in this material, with very little in the 31 conformation typical of xylan in solution. Additionally, spatial connections of noncarbohydrate species were observed with both cellulose peaks conventionally assigned as "surface" and as "interior" cellulose environments, raising questions about the origin of these two cellulose signals.This work was supported by BBSRC Grant BB/G016240/1, via
The BBSRC Sustainable Bioenergy Cell Wall Sugars Programme.
The UK 850 MHz solid state NMR Facility was
funded by EPSRC Grant EP/F017901/1 and the BBSRC, as
well as the University of Warwick, including via partial funding
through Birmingham Science City Advanced Materials Projects
1 and 2, by Advantage West Midlands (AWM) and the
European Regional Development Fund (ERDF).This is the final published version. It first appeared at http://pubs.acs.org/doi/abs/10.1021/bi501552k
Multiferroic (Nd,Fe)-doped PbTiO3 ceramics with coexistent ferroelectricity and magnetism at room temperature
We report the structural, dielectric, elastic, ferroelectric and ferromagnetic properties of multiferroic (Nd, Fe)-doped PbTiO3 perovskite ceramics with composition (Pb 0.88 Nd 0.08 )(Ti 0.94 Fe 0.04 Mn 0.02 )O 3 , prepared by different solid state reaction methods: the first one based on a single-stage calcination (Method I) and the second based on a double-stage calcination (Method II). Structural, dielectric and anelastic measurements evidenced a double phase transition for samples prepared by Method I, which has been attributed to phase separation. This phase separation has been confirmed also by TEM and HRTEM investigations. Samples prepared by Method II showed a single phase transition from paraelectric to ferroelectric phase. We found coexistent ferroelectric and ferromagnetic properties, also at room-temperature, but only for ceramics prepared by Method II. The crucial role of calcination process for avoiding phase separation and obtaining homogeneous structures with ferroelectric and ferromagnetic order is underlined
Increase Productivity Through Knowledge Management
Increase in competition level requires companies to improve the efficiency of work force use characterized by labor productivity. Professional knowledge of staff and its experience play the key role in it. The results of Extrusion Line operator's working time analysis are performed in this article. The analysis revealed that the reasons of working time ineffective use connected with inadequate information exchange and knowledge management in the company. Authors suggest the way to solve this problem: the main sources of knowledge in engineering enterprise have been defined, the conditions of success and the stages of knowledge management control have been stated
High Molecular Weight Mixed-Linkage Glucan as a Mechanical and Hydration Modulator of Bacterial Cellulose:Characterization by Advanced NMR Spectroscopy
Bacterial cellulose (BC) consists of a complex three-dimensional organization of ultrafine fibers which provide unique material properties such as softness, biocompatibility, and water-retention ability, of key importance for biomedical applications. However, there is a poor understanding of the molecular features modulating the macroscopic properties of BC gels. We have examined chemically pure BC hydrogels and composites with arabinoxylan (BC-AX), xyloglucan (BC-XG), and high molecular weight mixed-linkage glucan (BC-MLG). Atomic force microscopy showed that MLG greatly reduced the mechanical stiffness of BC gels, while XG and AX did not exert a significant effect. A combination of advanced solid-state NMR methods allowed us to characterize the structure of BC ribbons at ultra-high resolution and to monitor local mobility and water interactions. This has enabled us to unravel the effect of AX, XG, and MLG on the short-range order, mobility, and hydration of BC fibers. Results show that BC-XG hydrogels present BC fibrils of increased surface area, which allows BC-XG gels to hold higher amounts of bound water. We report for the first time that the presence of high molecular weight MLG reduces the density of clusters of BC fibrils and dramatically increases water interactions with BC. Our data supports two key molecular features determining the reduced stiffness of BC-MLG hydrogels, that is, (i) the adsorption of MLG on the surface of BC fibrils precluding the formation of a dense network and (ii) the preorganization of bound water by MLG. Hence, we have produced and fully characterized BC-MLG hydrogels with novel properties which could be potentially employed as renewable materials for applications requiring high water retention capacity (e.g. personal hygiene products)
Chemoenzymatic synthesis of fluorinated cellodextrins identifies a new allomorph for cellulose‐like materials
Understanding the fine details of the self-assembly of building blocks into complex hierarchical structures represents a major challenge en route to the design and preparation of soft-matter materials with specific properties. Enzymatically synthesised cellodextrins are known to have limited water solubility beyond DP9, a point at which they self-assemble into particles resembling the antiparallel cellulose II crystalline packing. We have prepared and characterised a series of site-selectively fluorinated cellodextrins with different degrees of fluorination and substitution patterns by chemoenzymatic synthesis. Bearing in mind the potential disruption of the hydrogen-bond network of cellulose II, we have prepared and characterised a multiply 6-fluorinated cellodextrin. In addition, a series of single site-selectively fluorinated cellodextrins was synthesised to assess the structural impact upon the addition of one fluorine atom per chain. The structural characterisation of these materials at different length scales, combining advanced NMR spectroscopy and microscopy methods, showed that a 6-fluorinated donor substrate yielded multiply 6-fluorinated cellodextrin chains that assembled into particles presenting morphological and crystallinity features, and intermolecular interactions, that are unprecedented for cellulose-like materials
Incorporating psychology into cyber security education: A pedagogical approach
The role of the human in cyber security is well acknowledged. Many cyber security incidents rely upon targets performing specific behavioural actions, such as opening a link within a phishing email. Cyber adversaries themselves are driven by psychological processes such as motivation, group dynamics and social identity. Furthermore, both intentional and unintentional insider threats are associated with a range of psychological factors, including cognitive load, mental wellbeing, trust and interpersonal relations. By incorporating psychology into cyber security education, practitioners will be better equipped with the skills they need to address cyber security issues. However, there are challenges in doing so. Psychology is a broad discipline, and many theories, approaches and methods may have little practical significance to cyber security. There is a need to sift through the literature to identify what can be applied to cyber security. There are also pedagogical differences in how psychology and cyber security are taught and also psychological differences in the types of student that may typically study psychology and cyber security. To engage with cyber security students, it is important that these differences are identified and positively addressed. Essential to this endeavor is the need to discuss and collaborate across the two disciplines. In this paper, we explore these issues and discuss our experiences as psychology and cyber security academics who work across disciplines to deliver psychology education to cyber security students, practitioners and commercial clients
ROS Initiated Oxidation of Dopamine under Oxidative Stress Conditions in Aqueous and Lipidic Environments
CONSIDERATIONS ON STATIC NONLINEAR ANALYSIS OF COUPLING DEVICES - NONLINEAR CURVE STRESSES
Coupling devices are the elements ensuring the connection between the power source (tractor) and the towed machine, which must be checked in terms of their safety on the public roads by means of different methods. One of these methods is represented by non-linear static analysis through nonlinear curve stresses, which can in some cases replace verification by endurance testing. The paper presents such an analysis as well as the results obtained from this analysis
Toward a structural model for the aluminum tellurite glass system
Neutron diffraction, 27Al MAS NMR, and 27Al Double Quantum MAS NMR results are presented and analyzed to determine the local environments of the cations in a series of aluminum tellurite glasses. Total scattering results show that, within a maximum Te–O distance of 2.36 Å, tellurium exhibits a mix of [TeO3E] and [TeO4E] environments (E = electron lone-pair), with a linear reduction in the average tellurium–oxygen coordination number as Al2O3 is added to the glass. This is accompanied by a linear decrease in the average aluminum–oxygen coordination number as [AlO4] units form at the expense of [AlO6] units, while the fraction of [AlO5] units remains roughly constant. A consideration of the bonding requirements of the five structural units in the glass, [TeO3E], [TeO4E], [AlO4], [AlO5], and [AlO6], has allowed a direct quantitative relationship between tellurium–oxygen and aluminum–oxygen coordination numbers to be derived for the first time, and this has been successfully extended to the boron tellurite system. Double Quantum 27Al MAS NMR indicates that, in contrast to previous reports, the shortest Al...Al separations are significantly smaller (∼3.2 Å) than expected for a uniform distribution and there is a preference for [AlO6]–[AlO6] and [AlO4]–[AlO4] corner sharing polyhedra. These associations support a new structural model which successfully applies the principle of charge balance to describe the interaction of tellurium and aluminum and identifies and explains the clustering of [AlOn] polyhedra in the glass and their preferred associations. [AlO6] and [TeO4E] units dominate the network in TeO2-rich glasses and [AlO4]− units form to stabilize the [TeO3E]+ units as alumina is added to the glass
- …