809 research outputs found
Influence of corrosive solutions on microhardness and chemistry of magnesium oxide /001/ surfaces
X-ray photoelectron spectroscopy analyses and hardness experiments were conducted on cleaved magnesium oxide /001/ surfaces. The magnesium oxide bulk crystals were cleaved to specimen size along the /001/ surface, and indentations were made on the cleaved surface in corrosive solutions containing HCl, NaOH, or HNO3 and in water without exposing the specimen to any other environment. The results indicated that chloride (such as MgCl2) and sodium films are formed on the magnesium oxide surface as a result of interactions between an HCl-containing solution and a cleaved magnesium oxide surface. The chloride films soften the magnesium oxide surface. In this case microhardness is strongly influenced by the pH value of the solution. The lower the pH, the lower the microhardness. Sodium films, which are formed on the magnesium oxide surface exposed to an NaOH containing solution, do not soften the magnesium oxide surface
Surface effects of corrosive media on hardness, friction, and wear of materials
Hardness, friction, and wear experiments were conducted with magnesium oxide exposed to various corrosive media and also with elemental iron and nickel exposed to water and NaOH. Chlorides such as MgCl2 and sodium containing films were formed on cleaved magnesium oxide surfaces. The MgCl2 films softened the magnesium oxide surfaces and caused high friction and great deformation. Hardness was strongly influenced by the pH value of the HCl-containing solution. The lower the pH, the lower the microhardness. Neither the pH value of nor the immersion time in NaOH containing, NaCl containing, and HNO3 containing solutions influenced the microhardness of magnesium oxide. NaOH formed a protective and low friction film on iron surfaces. The coefficient of friction and the wear for iron were low at concentrations of NaOH higher than 0.01 N. An increase in NaOH concentration resulted in a decrease in the concentration of ferric oxide on the iron surface. It took less NaOH to form a protective, low friction film on nickel than on iron
Influence of vegetation to boundary shear stress in open channel for overbank flow
River hydrodynamicsBed roughness and flow resistanc
Post-2015 Framework for Disaster Risk Reduction: A proposal for monitoring progress
The Third World Conference on Disaster Risk Reduction (WCDDR) will be held in Sendai City, Japan in March 2015, at which countries will adopt the post-2015 framework for disaster risk reduction (hereafter informally called HFA2). UNISDR - in collaboration with leading experts in related fields - is developing a proposal for new system of DRM indicators, which will contribute to discussions on HFA2 and WCDRR. This initiative follows the fourth session of the Global Platform for Disaster Risk Reduction, held in May 2013 in which 3,500 participants from 172 countries called for an immediate start of work to be led by the UNISDR to develop targets and indicators to monitor the reduction of risk and the implementation of HFA2. The successor framework will address the challenges posed by increasing disaster risk.
The development of effective monitoring system is crucial for building a successful post 2015 framework. The indicator system not only informs the need for continued monitoring on the key remaining issues of the HFA implementation, including the priority area of action 4 (reducing underlying risk factors), it will fundamentally shape the way international community understands and interprets the key challenges of disaster risk management agendas over the next 20-30 years. Also, the national level monitoring framework will likely inform local and community level DRM interventions, influencing the way we operationalize concepts such as disaster risk, vulnerability, resilience and its linkages with climate change and development goals. As the WCRR coincides with other important milestones of development and climate change agendas including the Sustainable Development Goals and the Post-Kyoto framework for climate change mitigation and adaptation, finding a holistic yet focused and manageable set of indicators - or what some refer to as the Holy Grail - has been a key focus of discussion surrounding the development of new monitoring system
Modeling of vegetated rivers for inbank and overbank flows
Model parameters such as friction factor and eddy viscosity in the Shiono & Knight method (SKM) are considered through experimental data obtained from a vegetated open channel. The experiment was conducted in a rectangular open channel with cylindrical rods as vegetation. Velocity, Reynolds stresses and boundary shear stress were measured with Acoustic Doppler Velocimetry (ADV) and a Preston tube re-spectively. Both friction factor and eddy viscosity were calculated using the measured data and found to be not constant in the shear layer generated by rods. The analytical solutions of SKM to predict velocity and boundary shear stress currently in use were based on the constant assumption of these parameters. In this pa-per a new analytical solution was derived by taking into a variation of these parameters account and was also verified with the experimental data. This solution was also applied to flow in compound channel with vegeta-tion. The new solution gives a good prediction of the lateral distribution of depth-averaged velocity and boundary shear stress in vegetated channels, and it predicts the boundary shear stress better than that of the original solution without considering the secondary flow term in particular
Ferromagnetic Quantum Critical Fluctuations and Anomalous Coexistence of Ferromagnetism and Superconductivity in UCoGe Revealed by Co-NMR and NQR Studies
Co nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR)
studies were performed in the recently discovered UCoGe, in which the
ferromagnetic and superconducting (SC) transitions were reported to occur at
K and K (N. T. Huy {\it et al.}, Phys.
Rev. Lett. {\bf 99} (2007) 067006), in order to investigate the coexistence of
ferromagnetism and superconductivity as well as the normal-state and SC
properties from a microscopic point of view. From the nuclear spin-lattice
relaxation rate and Knight-shift measurements, we confirmed that
ferromagnetic fluctuations which possess a quantum critical character are
present above and the occurrence of ferromagnetic transition at
2.5 K in our polycrystalline sample. The magnetic fluctuations in the normal
state show that UCoGe is an itinerant ferromagnet similar to ZrZn and
YCo. The onset SC transition was identified at K, below
which of 30 % of the volume fraction starts to decrease due to the
opening of the SC gap. This component of , which follows a
dependence in the temperature range of K, coexists with the
magnetic components of showing a dependence below .
From the NQR measurements in the SC state, we suggest that the self-induced
vortex state is realized in UCoGe.Comment: 5 pages, 7 figures. submitted to J. Phys. Soc. Jpn. To appear in J.
Phys. Soc. Jp
Pressure-induced anomalous magnetism and unconventional superconductivity in CeRhIn5 : 115In-NQR Study under Pressure
We report In nuclear-quadrupole-resonance (NQR) measurements of the
pressure()-induced superconductor CeRhIn in the antiferromagnetic (AF)
and superconducting (SC) states. In the AF region, the internal field
at the In site is substantially reduced from kOe at P=0 to 0.39
kOe at GPa, while the N\'eel temperature slightly changes with
increasing . This suggests that either the size in the ordered moment
or the angle between the direction of and
the tetragonal axis is extrapolated to zero at GPa at
which a bulk SC transition is no longer emergent. In the SC state at
GPa, the nuclear spin-lattice relaxation rate has revealed a
dependence without the coherence peak just below , giving evidence
for the unconventional superconductivity. The dimensionality of the magnetic
flutuations in the normal state are also discussed.Comment: 8pages,4figures,submitted to Phys. Rev. B. Rapid
- …