Enhancing hydrogen production from steam electrolysis in molten hydroxides via selection of non-precious metal electrodes

© 2020 Hydrogen Energy Publications LLC There are still gaps in the field of reference electrode that is needed to assist electrolysis in high temperature electrolytes (e.g. molten hydroxides) for H2 gas production. This research aims to fill the gaps by preparing Ni/Ni(OH)2 reference electrode and more importantly testing its effectiveness against important performance factors including; ion conducting membrane (e.g. mullite tubes), internal electrolyte composition, working temperature and electrochemical control (e.g. potential scan rate). Then, this reference electrode was used to study the electrocatalytic activity various cheaper working electrode materials including; stainless steel (St.st), Ni, Mo and Ag in comparison with Pt by the means of chronoamperometry and voltammetry. The effect of introducing steam into electrolyte (eutectic mixture of NaOH and KOH) on the electrocatalytic activity of these working electrodes was also studied. It was observed that the potential of hydrogen evolution with different working electrodes followed an order as; Pt > Ni > St. st > Ag > Mo (positive to negative). The performance of each working electrode was confirmed through chronoamperometry for hydrogen evolution at a constant potential of −0.7 V. It was also found in cyclic voltammetry and confirmed by chronoamperometry that the introduction of steam was apparent as increasing the current density at cathodic limit for hydrogen evolution. This study could help to develop non-precious metal electrodes for the production of hydrogen fuel. In future, there will be a potential in the threshold concentration of steam for H2 gas production

Electrochemical study of different membrane materials for the fabrication of stable, reproducible and reusable reference electrode

© 2020 Fabrication of stable, reproducible and reusable reference electrodes for low energy and high-temperature steam splitting is of great interest for hydrogen fuel production without anthropogenic carbon dioxide (CO2) emission. This study has been conducted for the detection of suitable material for the fabrication of novel reference electrode. In the present scenario, this research is designed to fabricate a novel nickel reference electrode by using operating conditions of eutectic molten hydroxide (NaOH-KOH, 49–51 mol%) at temperature 300 °C in an ion-conducting membrane of alumina and mullite tube. Afterwards, the designed nickel reference electrode has been examined for its reusability and stability by using electrochemical technique and cyclic voltammetry. Five scans of cyclic voltammetry are performed for both membrane fabricated reference electrode. A slight positive shift in oxidation peaks is observed for mullite membrane electrode (64 mV from scan 1 to 5). The stability measurements are noted by changing the scan rate between 50 and 150 mV s−1. Furthermore, the results show that the Ni/Ni(OH)2 reference electrode covered with a mullite membrane is stable and reusable at 300 °C temperature without any deterioration. The stability and reusability of prepared nickel reference electrode covered by mullite tube in the eutectic molten hydroxide were up to 9 days to carry out an electrochemical investigation, while for alumina tube reference electrode the stability and reliability were up to 3 days. The internal electrolytic material and ionic conductance can play an important role for future studies with this reference electrode along with optimisation of temperature and scan rate parameters

Thermal and kinetic analysis of diverse biomass fuels under different reaction environment: A way forward to renewable energy sources

This study investigates the thermal and kinetic analysis of six diverse biomass fuels, in order to provide valuable information for power and energy generation. Pyrolytic, combustion and kinetic analyses of barley straw, miscanthus, waste wood, wheat straw, short rotation coppicing (SRC) willow and wood pellet were examined by non-isothermal thermogravimetry analyser (TGA), differential thermogravimetric (DTG) and differential scanning calorimetry (DSC) techniques. Biomass fuels were thermally degraded under N2, air, CO2 and the selected oxy-fuel (30% O2/70% CO2) reaction environments. The thermal degradation under inert N2 and CO2 atmospheres showed an almost identical rate of weight loss (R), reactivity (RM × 103) and activation energy (Ea) profiles. Similar profiles for R, RM and Ea were observed for the environments under air (21% O2/79% N2) and the oxy-fuel combustion. Results indicated that the thermal decomposition rate for biomass fuels in an oxidising condition was faster than in an inert atmosphere, favourable effect on thermal degradation of biomass fuels was observed when oxygen content increased from 21 to 30%. Higher activation energies with lower reactivity were observed for the biomass fuels that have low cellulosic contents as compared to the other fuels. Regression analysis confirmed that the reaction order 0.5 modelled fitted well for all biomass samples. All these findings will provide valuable information and promote the advancement of future researches in this field

Worldwide trends in blood pressure from 1975 to 2015:a pooled analysis of 1479 population-based measurement studies with 19.1 million participants

Abstract Background: Raised blood pressure is an important risk factor for cardiovascular diseases and chronic kidney disease. We estimated worldwide trends in mean systolic and mean diastolic blood pressure, and the prevalence of, and number of people with, raised blood pressure, defined as systolic blood pressure of 140 mm Hg or higher or diastolic blood pressure of 90 mm Hg or higher. Methods: For this analysis, we pooled national, subnational, or community population-based studies that had measured blood pressure in adults aged 18 years and older. We used a Bayesian hierarchical model to estimate trends from 1975 to 2015 in mean systolic and mean diastolic blood pressure, and the prevalence of raised blood pressure for 200 countries. We calculated the contributions of changes in prevalence versus population growth and ageing to the increase in the number of adults with raised blood pressure. Findings: We pooled 1479 studies that had measured the blood pressures of 19.1 million adults. Global age-standardised mean systolic blood pressure in 2015 was 127.0 mm Hg (95% credible interval 125.7–128.3) in men and 122.3 mm Hg (121.0–123.6) in women; age-standardised mean diastolic blood pressure was 78.7 mm Hg (77.9–79.5) for men and 76.7 mm Hg (75.9–77.6) for women. Global age-standardised prevalence of raised blood pressure was 24.1% (21.4–27.1) in men and 20.1% (17.8–22.5) in women in 2015. Mean systolic and mean diastolic blood pressure decreased substantially from 1975 to 2015 in high-income western and Asia Pacific countries, moving these countries from having some of the highest worldwide blood pressure in 1975 to the lowest in 2015. Mean blood pressure also decreased in women in central and eastern Europe, Latin America and the Caribbean, and, more recently, central Asia, Middle East, and north Africa, but the estimated trends in these super-regions had larger uncertainty than in high-income super-regions. By contrast, mean blood pressure might have increased in east and southeast Asia, south Asia, Oceania, and sub-Saharan Africa. In 2015, central and eastern Europe, sub-Saharan Africa, and south Asia had the highest blood pressure levels. Prevalence of raised blood pressure decreased in high-income and some middle-income countries; it remained unchanged elsewhere. The number of adults with raised blood pressure increased from 594 million in 1975 to 1.13 billion in 2015, with the increase largely in low-income and middle-income countries. The global increase in the number of adults with raised blood pressure is a net effect of increase due to population growth and ageing, and decrease due to declining age-specific prevalence. Interpretation: During the past four decades, the highest worldwide blood pressure levels have shifted from high-income countries to low-income countries in south Asia and sub-Saharan Africa due to opposite trends, while blood pressure has been persistently high in central and eastern Europe