6,494 research outputs found
Fluctuation characteristics of the TCV snowflake divertor measured with high speed visible imaging
Tangentially viewing fast camera footage of the low-field side snowflake
minus divertor in TCV is analysed across a four point scan in which the
proximity of the two X-points is varied systematically. The motion of
structures observed in the post- processed movie shows two distinct regions of
the camera frame exhibiting differing patterns. One type of motion in the outer
scrape-off layer remains present throughout the scan whilst the other, apparent
in the inner scrape-off layer between the two nulls, becomes increasingly
significant as the X-points contract towards one another. The spatial structure
of the fluctuations in both regions is shown to conform to the equilibrium
magnetic field. When the X-point gap is wide the fluctuations measured in the
region between the X-points show a similar structure to the fluctuations
observed above the null region, remaining coherent for multiple toroidal turns
of the magnetic field and indicating a physical connectivity of the
fluctuations between the upstream and downstream regions. When the X-point gap
is small the fluctuations in the inner scrape-off layer between the nulls are
decorrelated from fluctuations upstream, indicating local production of
filamentary structures. The motion of filaments in the inter-null region
differs, with filaments showing a dominantly poloidal motion along magnetic
flux surfaces when the X-point gap is large, compared to a dominantly radial
motion across flux-surfaces when the gap is small. This demonstrates an
enhancement to cross-field tranport between the nulls of the TCV low-field-side
snowflake minus when the gap between the nulls is small.Comment: Accepted for publication in Plasma Physics and Controlled Fusio
Distributed Computing Grid Experiences in CMS
The CMS experiment is currently developing a computing system capable of serving, processing and archiving the large number of events that will be generated when the CMS detector starts taking data. During 2004 CMS undertook a large scale data challenge to demonstrate the ability of the CMS computing system to cope with a sustained data-taking rate equivalent to 25% of startup rate. Its goals were: to run CMS event reconstruction at CERN for a sustained period at 25 Hz input rate; to distribute the data to several regional centers; and enable data access at those centers for analysis. Grid middleware was utilized to help complete all aspects of the challenge. To continue to provide scalable access from anywhere in the world to the data, CMS is developing a layer of software that uses Grid tools to gain access to data and resources, and that aims to provide physicists with a user friendly interface for submitting their analysis jobs. This paper describes the data challenge experience with Grid infrastructure and the current development of the CMS analysis system
Diffractive Dissociation In The Interacting Gluon Model
We have extended the Interacting Gluon Model (IGM) to calculate diffractive
mass spectra generated in hadronic collisions. We show that it is possible to
treat both diffractive and non-diffractive events on the same footing, in terms
of gluon-gluon collisions. A systematic analysis of available data is
performed. The energy dependence of diffractive mass spectra is addressed. They
show a moderate narrowing at increasing energies. Predictions for LHC energies
are presented.Comment: 12 pages, latex, 14 figures (PostScript Files included); accepted for
publication in Phys. Rev. D (Feb.97
Diversity within Italian Cheesemaking Brine-Associated Bacterial Communities Evidenced by Massive Parallel 16S rRNA Gene Tag Sequencing
This study explored the bacterial diversity of brines used for cheesemaking in Italy, as well as their physicochemical characteristics. In this context, 19 brines used to salt soft, semi-hard, and hard Italian cheeses were collected in 14 commercial cheese plants and analyzed using a culture-independent amplicon sequencing approach in order to describe their bacterial microbiota. Large NaCl concentration variations were observed among the selected brines, with hard cheese brines exhibiting the highest values. Acidity values showed a great variability too, probably in relation to the brine use prior to sampling. Despite their high salt content, brine microbial loads ranged from 2.11 to 6.51 log CFU/mL for the total mesophilic count. Microbial community profiling assessed by 16S rRNA gene sequencing showed that these ecosystems were dominated by Firmicutes and Proteobacteria, followed by Actinobacteria and Bacteroidetes. Cheese type and brine salinity seem to be the main parameters accountable for brine microbial diversity. On the contrary, brine pH, acidity and protein concentration, correlated to cheese brine age, did not have any selective effect on the microbiota composition. Nine major genera were present in all analyzed brines, indicating that they might compose the core microbiome of cheese brines. Staphylococcus aureus was occasionally detected in brines using selective culture media. Interestingly, bacterial genera associated with a functional and technological use were frequently detected. Indeed Bifidobacteriaceae, which might be valuable probiotic candidates, and specific microbial genera such as Tetragenococcus, Corynebacterium and non-pathogenic Staphylococcus, which can contribute to sensorial properties of ripened cheeses, were widespread within brines. \ua9 2017 Marino, Innocente, Maifreni, Mounier, Cobo-D\uedaz, Coton, Carraro and Cardazzo
Persistent storage of non-event data in the CMS databases
In the CMS experiment, the non event data needed to set up the detector, or being produced by it, and needed to calibrate the physical responses of the detector itself are stored in ORACLE databases. The large amount of data to be stored, the number of clients involved and the performance requirements make the database system an essential service for the experiment to run. This note describes the CMS condition database architecture, the data-flow and PopCon, the tool built in order to populate the offline databases. Finally, the first results obtained during the 2008 and 2009 cosmic data taking are presented.In the CMS experiment, the non event data needed to set up the detector, or being produced by it, and needed to calibrate the physical responses of the detector itself are stored in ORACLE databases. The large amount of data to be stored, the number of clients involved and the performance requirements make the database system an essential service for the experiment to run. This note describes the CMS condition database architecture, the data-flow and PopCon, the tool built in order to populate the offline databases. Finally, the first experience obtained during the 2008 and 2009 cosmic data taking are presented
Cross-code comparison of the edge codes SOLPS-ITER, SOLEDGE2D and UEDGE in modelling a low-power scenario in the DTT
As reactor-level nuclear fusion experiments are approaching, a solution to the power exhaust issue in future fusion reactors is still missing. The maximum steady-state heat load that can be exhausted by the present technology is around 10 MW m-2. Different promising strategies aiming at successfully managing the power exhaust in reactor-relevant conditions such that the limit is not exceeded are under investigation, and will be tested in the Divertor Tokamak Test (DTT) experiment. Meanwhile, the design of tokamaks beyond the DTT, e.g. EU-DEMO/ARC, is progressing at a high pace. A strategy to work around the present lack of reactor-relevant data consists of exploiting modelling to reduce the uncertainty in the extrapolation in the design phase. Different simulation tools, with their own capabilities and limitations, can be employed for this purpose. In this work, we compare SOLPS-ITER, SOLEDGE2D and UEDGE, three state-of-the-art edge codes heavily used in power exhaust studies, in modelling the same DTT low-power, pure-deuterium, narrow heat-flux-width scenario. This simplified, although still reactor-relevant, testbed eases the cross-comparison and the interpretation of the code predictions, to identify areas where results differ and develop understanding of the underlying causes. Under the conditions investigated, the codes show encouraging agreement in terms of key parameters at both targets, including peak parallel heat flux (1%-45%), ion temperature (2%-19%), and inner target plasma density (1%-23%) when run with similar input. However, strong disagreement is observed for the remaining quantities, from 30% at outer mid-plane up to a factor 4-5 at the targets. The results primarily reflect limitations of the codes: the SOLPS-ITER plasma mesh not reaching the first wall, SOLEDGE2D not including ion-neutral temperature equilibration, and UEDGE enforcing a common ion-neutral temperature. Potential improvements that could help enhance the accuracy of the code models for future applications are also discussed
Effect of graphene nanoplatelets on the impact response of a carbon fibre reinforced composite
In the present paper, experimental investigations were conducted to assess the effect of nanomodification on the impact behaviours of hybrid composite plates. Graphene nanoplatelets (GNPs) of two different sizes, 5 and 30 µm, were used to modify a composite material made with 64 wt.% of unidirectional fibres and a low-viscosity epoxy resin. The effect of the nanomodification with 30 µm GNPs was also studied on composite plates prepared with a higher viscosity resin. Three laminate thicknesses (4, 8, and 16 layers) were tested with a standard drop dart testing technique. The peak forces as well as the absorbed energy and the fracture surfaces, observed with a Scanning Electron Microscope (SEM), were compared. Experimental results showed that nano-modification with 5 µm particles had a detrimental effect on both the peak forces and the absorbed energy, whereas the addition of 30 µm GNPs increased the absorbed energy, especially for a laminate thickness of 16 layers. Overall, the experimental results demonstrated that the size of graphene nanoparticles has a significant effect on the impact response of composite laminates
The plasma boundary in Single Helical Axis RFP plasmas
Single Helical Axis (SHAx) states obtained in high current reversed field
pinch (RFP) plasmas display, aside from a dominant mode in the m=1 spectrum,
also a dominant m=0 mode, with the same toroidal mode number as the m=1 one.
The two modes have a fixed phase relationship. The island chain created by the
m=0 mode across the reversal surface gives rise, at shallow reversal of the
toroidal field, to an X-point structure which separates the last closed flux
surface from the first wall, creating a divertor-like configuration. The
plasma-wall interaction is found to be related to the connection length of the
field lines intercepting the wall, which displays a pattern modulated by the
dominant mode toroidal periodicity. This configuration, which occurs only for
shallow toroidal field reversal, could be exploited to realize an island
divertor in analogy to stellarators.Comment: 12 pages, 9 figures Submitted to Nuclear Fusio
Discriminating signal from background using neural networks. Application to top-quark search at the Fermilab Tevatron
The application of Neural Networks in High Energy Physics to the separation
of signal from background events is studied. A variety of problems usually
encountered in this sort of analyses, from variable selection to systematic
errors, are presented. The top--quark search is used as an example to
illustrate the problems and proposed solutions.Comment: 11 pages, 3 figures, psfi
- …