Structural behaviour of beam with HDPE plastic balls subjected to flexure load

This paper presents the structural behavior of reinforced concrete beam embedded with high density polyethylene balls (HDPE) subjected to flexural load. The HDPE balls with 180 mm diameter were embedded to create the spherical voids in the beam which lead to reduction in its self-weight. Two beam specimens with HDPE balls (RC-HDPE) and one solid beam (RC-S) with dimension 250 mm x 300 mm x 1100 mm were cast and tested until failure. The results are analysed in the context of its ultimate load, load-deflection profile, and crack pattern and failure mode. It was found that the ultimate load of RC-HDPE was reduced by 32% compared to RC-S beam while the maximum deflection at its mid span was increased by 4%. However, RC-HDPE is noticed to be more ductile compared to RC-S beam. Both types of beams experienced flexure cracks and diagonal tension cracks before failur

Thermo‑mechanical properties of various densities of foamed concrete incorporating polypropylene fibres

Concrete has been extensively used in the development of urban infrastructure works. However, it has the tendency to absorb solar radiations, and these radiations are released back into the air in the form of heat energy. Dense concentration of infrastructures releases more heat, causing urban heat island (UHI) effect in which the ambient temperature of the urban areas rises slightly than the surrounding areas. Tropical countries which have a hot climate throughout the year are more affected by the UHI effect. Therefore, thermal insulating materials need to be introduced in the field of concrete construction. Foamed concrete, which has air voids in its matrix, is a potential thermal insulating material. But due to reduced density, it, however, achieves lower strength. Polypropylene (PP) fibres are used to reinforce the foamed concrete and improve its compressive and tensile strengths. In this study, three different densities, 1400, 1600 and 1800 kg/m3, were cast, and 0.8% PP fibres were added. The thermo-mechanical properties were investigated in terms of thermal conductivity, surface temperature, compressive and tensile strengths with and without the addition of PP fibres. Based on the findings, the addition of PP fibres gained more strength and reduced thermal conductivity in the lower densities of foamed concrete. In contrast, it had an opposite impact on 1800 kg/m3 density. The addition of PP fibres also indicated that it could reduce the surface temperature of higher-density foamed concrete compared to lower densities

Feature selection method based on sparse representation classification for face recognition

Compressed sensing is a signal processing technique. The entity signal can be efficiently reconstructed if the sparse representation is determined. The sparse representations of all the test images are determined with respect to the training set by computing the l1-minimization. However, sparse representation which involves high dimensional feature vector is computationally expensive. Thus, discriminative features that could perform accurately for the face recognition system under visual variations, such as illumination, expression and occlusion have to be selected carefully. In this paper, feature selection method in the application of face recognition based on sparse representation classifier (SRC) is proposed. The proposed technique first divides the images of a few subjects into chunks. Then, it selects the feature subsets based on distance based measurement, the residual, and recognition performance, the accuracy. Extensive experiments with visual variations are carried out by using ORL, AR and Yale databases

Chemical and fresh state properties of foamed concrete incorporating palm oil fuel ash and eggshell ash as cement replacement

Malaysia faces three major environmental problems, out of which solid waste and management is one of them. Palm Oil Fuel Ash (POFA) and eggshells are two agro-food waste materials which are produced in enormous quantities in Malaysia. Due to the characteristics possessed by eggshells and POFA, these waste materials can potentially be utilized in the production as cement replacement, reducing the use of cement which is one of the major production of Carbon Dioxide (CO2) gas emissions. This study was conducted to determine the chemical and fresh state properties of foamed concrete incorporating POFA and eggshell ash (ESA) as cement replacement. Based upon the results, it was observed that the increase in usage amount of POFA and ESA as cement replacement, the workability of foamed concrete reduced without blocking. For the chemical analysis result shows the POFA which had high amount of silicon dioxide and ESA having large amount of calcium oxide were compatible and could be used together as cement replacement. The use of ESA and POFA as cement replacement to reduce the cement consumption with various percentage of ESA (0% - 15%) and POFA (20% - 35%) in 1800 kg/m3 density of foamed concret

PLGA/nHA hybrid nanofiber scaffold as a nanocargo carrier of insulin for accelerating bone tissue regeneration

The development of tissue engineering in the field of orthopedic surgery is booming. Two fields of research in particular have emerged: approaches for tailoring the surface properties of implantable materials with osteoinductive factors as well as evaluation of the response of osteogenic cells to these fabricated implanted materials (hybrid material). In the present study, we chemically grafted insulin onto the surface of hydroxyapatite nanorods (nHA). The insulin-grafted nHAs (nHA-I) were dispersed into poly(lactide-co-glycolide) (PLGA) polymer solution, which was electrospun to prepare PLGA/nHA-I composite nanofiber scaffolds. The morphology of the electrospun nanofiber scaffolds was assessed by field emission scanning electron microscopy (FESEM). After extensive characterization of the PLGA/nHA-I and PLGA/nHA composite nanofiber scaffolds by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectrometry (EDS), and transmission electron microscopy (TEM), the PLGA/nHA-I and PLGA/nHA (used as control) composite nanofiber scaffolds were subjected to cell studies. The results obtained from cell adhesion, alizarin red staining, and Von Kossa assay suggested that the PLGA/nHA-I composite nanofiber scaffold has enhanced osteoblastic cell growth, as more cells were proliferated and differentiated. The fact that insulin enhanced osteoblastic cell proliferation will open new possibilities for the development of artificial scaffolds for bone tissue regeneration

Dramatic Improvement in Juvenile Parkinsonism after Levodopa Treatment in a Patient Negative for the PANK2 Mutation

Digitalitzat per Artypla

Heavy metal pollution in surface sediments collected from drainages receiving different anthropogenic sources from Peninsular Malaysia

Surface drainage sediments were collected, between January and April in 2005, from 6 sampling sites in Peninsular Malaysia suspected to have received different anthropogenic sources. These drainages included sites near a petrochemical plant, an electronic factory, a metal factory and 2 townships in addition to a relatively unpolluted site (a reference site). Based on the aqua-regia method, the metal concentrations for all the sampling sites except for the agricultural site (reference site) at Sg. Benut were between 60.92-1 019 μg/g dry weight for copper (Cu), 65.32-1 266.6 μg/g dry weight for plumbum (Pb), 1.46-15.93 μg/g dry weight for cadmium (Cd), 330.10-484.14 μg/g dry weight for zinc (Zn) and 47.03-120.90 μg/g dry weight for nickel (Ni). All of these ranges were significantly (p < 0.05) higher than those (Cu: 8.77 μg/g; Pb: 57.42 μg/g; Cd: 0.96 μg/g; Zn: 68.21 μg/g; and Ni: 17.87 μg/g) of the reference site at Sg. Benut that only received agricultural disposal. The concentrations for the 5 metals from all the sites (except for the reference site) were higher than the Sediment Quality Values for Hong Kong by Chapman et al (1999) for the 5 metals. Based on the sequential extraction technique, 3 geochemical fractions [easily, freely leachable and exchangeable (EFLE), acid-reducible and oxidisable-organic] were also useful in identifying these polluted sites. The elevated metal concentrations found in the sediments might be related to point sources of industrial effluent and urban waste. Hence, the results emphasized the necessity for the treatment of effluents into this drainage area. As part of the effort to control illegal discharges and dumping into drainages, public awareness should be enhanced

Nanofibrous scaffolds in biomedical applications

Nanofibrous scaffolds are artificial extracellular matrices which provide natural environment for tissue formation. In comparison to other forms of scaffolds, the nanofibrous scaffolds promote cell adhesion, proliferation and differentiation more efficiently due to having high surface to volume ratio. Although scaffolds for tissue engineering have been fabricated by various techniques but electrospun nanofibrous scaffolds have shown great potential in the fields of tissue engineering and regeneration. This review highlights the applications and importance of electrospun nanofibrous scaffolds in various fields of biomedical applications ranging from drug delivery to wound healing. Attempts have also been made to highlights the advantages and disadvantages of nanofirbous scaffolds fabricated for biomedical applications using technique of electrospinning. The role of various factors controlling drug distribution in electrospun nanofibrous scaffolds is also discussed to increase the therapeutic efficiency of nanofibrous scaffolds in wound healing and drug delivery applications