Profile of Hashimoto's Thyroiditis in Sri Lankans: Is There an Increased Risk of Ancillary Pathologies in Hashimoto's Thyroiditis?

Hashimoto's thyroiditis has been reported to be associated with many neoplastic and nonneoplastic thyroid pathologies. This retrospective study aims to determine the demographic profile of Hashimoto's thyroiditis in Sri Lankans, document ancillary pathologies in Hashimoto's thyroiditis, and determine whether there is an increased risk of occurrence of malignancies, benign neoplasms, and nonneoplastic benign lesions in Hashimoto's thyroiditis by comparing with thyroids showing multinodular goiters, follicular adenomas, and colloid nodules. The mean age of Hashimoto's thyroiditis is 43.3 years with the majority in the 41 to 60 year age group and a female to male ratio of 10.3 : 1. This study revealed a statistically significant increase of thyroid malignancies in association with Hashimoto's thyroiditis. The association of Papillary carcinoma, Non-Hodgkin's lymphoma, and Hurthle cell adenoma with Hashimoto's thyroiditis was statistically significant

Evolution of Surface Nanopores in Pressurised Gyrospun Polymeric Microfibers

The selection of a solvent or solvent system and the ensuing polymer–solvent interactions are crucial factors affecting the preparation of fibers with multiple morphologies. A range of poly(methylmethacrylate) fibers were prepared by pressurised gyration using acetone, chloroform, N,N-dimethylformamide (DMF), ethyl acetate and dichloromethane as solvents. It was found that microscale fibers with surface nanopores were formed when using chloroform, ethyl acetate and dichloromethane and poreless fibers were formed when using acetone and DMF as the solvent. These observations are explained on the basis of the physical properties of the solvents and mechanisms of pore formation. The formation of porous fibers is caused by many solvent properties such as volatility, solubility parameters, vapour pressure and surface tension. Cross-sectional images show that the nanopores are only on the surface of the fibers and they were not inter-connected. Further, the results show that fibers with desired nanopores (40–400 nm) can be prepared by carefully selecting the solvent and applied pressure in the gyration process

Core/shell microencapsulation of indomethacin/paracetamol by co-axial electrohydrodynamic atomization

Core/shell microparticles for development of drug delivery systems were prepared using co-axial electrohydrodynamic atomization technique in order to develop fixed dose combined formulations incorporating paracetamol and indomethacin as model drugs. The developed drug delivery systems offered successful co-encapsulation of paracetamol and indomethacin with high drug encapsulation efficiencies of 54% and 69% for paracetamol and indomethacin, respectively. The developed formulations were further characterised with respect to their morphology, drug release profile and possible interactions. In comparison to the release rate of the free indomethacin, the developed formulation resulted in enhanced dissolution rate of indomethacin. This study demonstrates a versatile polymeric platform where multiple drug encapsulation and co-delivery is made possible by utilizing co-axial electrohydrodynamic atomization. The proposed system offered high processing yield of 60–70%, as a single-step platform for preparation of fixed dose formulations for oral drug delivery, particularly in geriatric therapy

Copolymer Composition and Nanoparticle Configuration Enhance in vitro Drug Release Behavior of Poorly Water-soluble Progesterone for Oral Formulations

HYPOTHESIS: Developing oral formulations to enable effective release of poorly water-soluble drugs like progesterone is a major challenge in pharmaceutics. Coaxial electrospray can generate drug-loaded nanoparticles of strategic compositions and configurations to enhance physiological dissolution and bioavailability of poorly water-soluble drug progesterone. EXPERIMENTS: ix formulations comprising nanoparticles encapsulating progesterone in different poly(lactide-co-glycolide) (PLGA) matrix configurations and compositions were fabricated and characterized in terms of morphology, molecular crystallinity, drug encapsulation efficiency and release behavior. FINDINGS: A protocol of fabrication conditions to achieve 100% drug encapsulation efficiency in nanoparticles was developed. Scanning electron microscopy shows smooth and spherical morphology of 472.1± 54.8 to 588.0± 92.1 nm in diameter. Multiphoton Airyscan super-resolution confocal microscopy revealed core-shell nanoparticle configuration. Fourier transform infrared spectroscopy confirmed presence of PLGA and progesterone in all formulations. Diffractometry indicated amorphous state of the encapsulated drug. UV-vis spectroscopy showed drug release increased with hydrophilic copolymer glycolide ratio while core-shell formulations with progesterone co-dissolved in PLGA core exhibited enhanced release over five hours at 79.9± 1.4% and 70.7± 3.5% for LA:GA 50:50 and 75:25 in comparison with pure progesterone without polymer matrix in the core at 67.0± 1.7% and 57.5± 2.8%, respectively. Computational modeling showed good agreement with the experimental drug release behavior in vitro

A Comparison of Electric-Field-Driven and Pressure-Driven Fiber Generation Methods for Drug Delivery

Polymeric fibers are prepared by using electric field driven fiber production technology-electrospinning and pressure driven fiber production technology-pressurized gyration. Fibers of four different polymers: polyvinylidene fluoride (PVDF), poly(methyl methacrylate (PMMA), poly(N-isopropylacrylamide), and polyvinylpyridine (PVP), are spun by both techniques and differences are analyzed for their suitability as drug carriers. The diameters of electrospun fibers are larger in some cases (PVDF and PMMA), producing fibers with lower surface area. Pressurized gyration allows for a higher rate of fiber production. Additionally, drug-loaded PVP fibers are prepared by using two poorly water-soluble drugs (Amphotericin B and Itraconazole). In vitro dissolution studies show differences in release rate between the two types of fibers. Drug-loaded gyrospun fibers release the drugs faster within 15 min compared to the drug-loaded electrospun fibers. The findings suggest pressurized gyration is a promising and scalable approach to rapid fiber production for drug delivery when compared to electrospinning

Gyrospun antimicrobial nanoparticle loaded fibrous polymeric filters

A one step approach to prepare hybrid nanoparticle embedded polymer fibres using pressurised gyration is presented. Two types of novel antimicrobial nanoparticles and poly(methylmethacrylate) polymer were used in this work. X-ray diffraction analysis of the nanoparticles revealed Ag, Cu and W are the main elements present in them. The concentration of the polymer solution and the nanoparticle concentration had a significant influence on the fibre diameter, pore size and morphology. Fibres with a diameter in the range of 6-20. μm were spun using 20. wt% polymer solutions containing 0.1, 0.25 and 0.5 wt% nanoparticles under 0.3. MPa working pressure and a rotational speed of 36,000. rpm. Continuous, bead-free fibre morphologies were obtained for each case. The pore size in the fibres varied between 36 and 300. nm. Successful incorporation of the nanoparticles in polymer fibres was confirmed by energy dispersive x-ray analysis. The fibres were also gyrospun on to metallic discs to prepare filters which were tested for their antibacterial activity on a suspension of Pseudomonas aeruginosa. Nanoparticle loaded fibres showed higher antibacterial efficacy than pure poly(methylmethacrylate) fibres

Electrosprayed microparticles for intestinal delivery of prednisolone

Single and coaxial electrospraying was used to prepare Eudragit L100-55 polymer microparticles containing prednisolone as the active pharmaceutical ingredient. Different compositions of prednisolone and Eudragit L100-55 were used to develop five different formulations with different polymer : drug ratios. The resultant microparticles had a toroidal shape with a narrow size distribution. Prednisolone was present in an amorphous physical state, as confirmed by X-ray diffraction analysis. Dissolution studies were carried out in order to investigate the feasibility of the proposed system for site-specific release of prednisolone. The release rates were interpreted in terms of diffusion-controlled release. It was shown that utilization of pH-responsive Eudragit L100-55 could minimize the release of prednisolone in the acidic conditions of the stomach, which was followed by rapid release as the pH of the release medium was adjusted to 6.8 after the first 2 h. This is especially desirable for the treatment of conditions including inflammatory bowel disease and colon cancer

Characterisation of chemical composition and structural features of novel antimicrobial nanoparticles

© 2017 by the authors. Licensee MDPI, Basel, Switzerland. This is an open access article distributed under the Creative Commons Attribution License (CC BY 4.0) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Three antimicrobial nanoparticle types (AMNP0, AMNP1 and AMNP2) produced using the TesimaTM thermal plasma technology were investigated and their compositions determined using a combination of analytical methods. Scanning electron micrograph provided the morphology of these particles with observed sizes ranging from 10 – 50 nm. Whilst FTIR spectra confirmed the absence of polar bonds and organic impurities, strong Raman active vibrational bands at ca. 1604 and 1311 cm-1 ascribed to C-C vibrational motions were observed. Carbon signals resonated at δC126 ppm in solid state NMR spectra confirmed sp2 hybridised carbons were present in high concentration in two of the nanoparticle types (AMNP1 and AMNP2). X-ray powder diffraction suggested AMNP0 contains single phase WC in a high state of purity and multiple phases of WC/WC1-x were identified in both AMNP1 and AMNP2. Finally, XPS surface analyses revealed and quantified the elemental ratios in these composite formulations.Peer reviewe

Harnessing Polyhydroxyalkanoates and Pressurized Gyration for Hard and Soft Tissue Engineering

Organ dysfunction is a major cause of morbidity and mortality. Transplantation is typically the only definitive cure, challenged by the lack of sufficient donor organs. Tissue engineering encompasses the development of biomaterial scaffolds to support cell attachment, proliferation, and differentiation, leading to tissue regeneration. For efficient clinical translation, the forming technology utilized must be suitable for mass production. Herein, uniaxial polyhydroxyalkanoate scaffolds manufactured by pressurized gyration, a hybrid scalable spinning technique, are successfully used in bone, nerve, and cardiovascular applications. Chorioallantoic membrane and in vivo studies provided evidence of vascularization, collagen deposition, and cellular invasion for bone tissue engineering. Highly efficient axonal outgrowth was observed in dorsal root ganglion-based 3D ex vivo models. Human induced pluripotent stem cell derived cardiomyocytes exhibited a mature cardiomyocyte phenotype with optimal calcium handling. This study confirms that engineered polyhydroxyalkanoate-based gyrospun fibers provide an exciting and unique toolbox for the development of scalable scaffolds for both hard and soft tissue regeneration

Gyrospun antimicrobial nanoparticle loaded fibrous polymeric filters

© 2016 The Authors. Published by Elsevier B.V. © 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).A one step approach to prepare hybrid nanoparticle embedded polymer fibres using pressurised gyration is presented. Two types of novel antimicrobial nanoparticles and poly (methylmethacrylate) polymer were used in this work. X-ray diffraction analysis of the nanoparticles revealed Ag, Cu and W are the main elements present in them. The concentration of the polymer solution and the nanoparticle concentration had a significant influence on the fibre diameter, pore size and morphology. Fibres with a diameter in the range of 6-20 ìm were spun using 20 wt% polymer solutions containing 0.1, 0.25 and 0.5 w% nanoparticles under 0.3 MPa working pressure and a rotational speed of 36000 rpm. Continuous, bead-free fibre morphologies were obtained for each case. The pore size in the fibres varied between 36-300 nm. Successful incorporation of the nanoparticles in polymer fibres was confirmed by energy dispersive x-ray analysis. The fibres were also gyrospun on to metallic disks to prepare filters which were tested for their antibacterial activity on a suspension of Pseudomonas aeruginosa. Nanoparticle loaded fibres showed higher antibacterial efficacy than pure poly(methylmethacrylate) fibres.8pÍuPeer reviewedFinal Published versio