Statistical assessment of ELM triggering by pellets on JET

© 2021 IAEA, Vienna. This article investigates the triggering of ELMs on JET by injection of frozen pellets of isotopes of Hydrogen. A method is established to determine the probability that a specific pellet triggers a particular ELM. This method allows clear distinction between pellet-ELM pairs that are very likely to represent triggering events and pairs that are very unlikely to represent such an event. Based on this, the pellet parameters that are most likely to affect the ability of pellets to trigger ELMs have been investigated. It has been found that the injection location is very important, with injection from the vertical high field side showing a much higher triggering efficiency than low field side (LFS) injection. The dependence on parameters such as pellet speed and size and the time since the last ELM is also seen to be much stronger for LFS injection. Finally, the paper illustrates how improvements to the pellet injection system by streamlining the pellet flight lines and slightly increasing the pellet size has resulted in a significantly improved ability to deliver pellets to the plasma and trigger ELMs.s

Upcycling spent brewery grains through the production of carbon adsorbents: application to the removal of carbamazepine from water

Spent brewery grains, a by-product of the brewing process, were used as precursor of biochars and activated carbons to be applied to the removal of pharmaceuticals from water. Biochars were obtained by pyrolysis of the raw materials, while activated carbons were produced by adding a previous chemical activation step. The influence of using different precursors (from distinct fermentation processes), activating agents (potassium hydroxide, sodium hydroxide, and phosphoric acid), pyrolysis temperatures, and residence times was assessed. The adsorbents were physicochemically characterized and applied to the removal of the antiepileptic carbamazepine from water. Potassium hydroxide activation produced the materials with the most promising properties and adsorptive removals, with specific surface areas up to 1120 m2 g-1 and maximum adsorption capacities up to 190 ± 27 mg g-1 in ultrapure water. The adsorption capacity suffered a reduction of < 70% in wastewater, allowing to evaluate the impact of realistic matrices on the efficiency of the materials.publishe

The distributed ASCI supercomputer project

The Distributed ASCI Supercomputer (DAS) is a homogeneous wide-area distributed system consisting of four cluster computers at different locations. DAS has been used for research on communication software, parallel languages and programming systems, schedulers, parallel applications, and distributed applications. The paper gives a preview of the most interesting research results obtained so far in the DAS project

Multi-machine analysis of termination scenarios, providing the specifications for controlled shutdown of ITER discharges

The task is to show that the specific ITER design features allow a stable well-controlled termination. This is a joint effort in control, exception handling development and physics modelling. Relevant for ITER is to maintain vertical, radial position, and shape control during the termination, especially at the time of the relatively fast H-L transition. The analysis of a database, built using a selected set of experimental termination cases, is performed

Exploration of the equilibrium operating space for NSTX-Upgrade

This paper explores a range of high-performance equilibrium scenarios available in the NSTX-Upgrade device [J.E. Menard, submitted for publication to Nuclear Fusion]. NSTX-Upgrade is a substantial upgrade to the existing NSTX device [M. Ono, et al., Nuclear Fusion 40, 557 (2000)], with significantly higher toroidal field and solenoid capabilities, and three additional neutral beam sources with significantly larger current drive efficiency. Equilibria are computed with freeboundary TRANSP, allowing a self consistent calculation of the non-inductive current drive sources, the plasma equilibrium, and poloidal field coil current, using the realistic device geometry. The thermal profiles are taken from a variety of existing NSTX discharges, and different assumptions for the thermal confinement scalings are utilized. The no-wall and idealwall n=1 stability limits are computed with the DCON code. The central and minimum safety factors are quite sensitive to many parameters: they generally increases with large outer plasmawall gaps and higher density, but can have either trend with the confinement enhancement factor. In scenarios with strong central beam current drive, the inclusion of non-classical fast ion diffusion raises qmin, decreases the pressure peaking, and generally improves the global stability, at the expense of a reduction in the non-inductive current drive fraction; cases with less beam current drive are largely insensitive to additional fast ion diffusion. The non-inductive current level is quite sensitive to the underlying confinement and profile assumptions. For instance, for BT=1.0 T and Pinj=12.6 MW, the non-inductive current level varies from 875 kA with ITER-98y,2 thermal confinement scaling and narrow thermal profiles to 1325 kA for an ST specific scaling expression and broad profiles. This sensitivity should facilitate the determination of the correct scaling of transport with current and field to use for future fully non-inductive ST devices. Scenarios are presented which can be sustained for 8-10 seconds, or (20-30)τCR, at βN=3.8-4.5, facilitating, for instance, the study of disruption avoidance for very long pulse. Scenarios have been documented which can operate with βT~25% and equilibrated qmin&gt;1. The value of qmin can be controlled at either fixed non-inductive fraction of 100% or fixed plasma current, by varying which beam sources are used, opening the possibility for feedback qmin control. In terms of quantities like collisionality, neutron emission, non-inductive fraction, or stored energy, these scenarios represent a significant performance extension compared to NSTX and other present spherical torii