4,344 research outputs found
analysis of dynamic instabilities in bridges under wind action through a simple friction based mechanical model
Abstract In the field of stability of structures under nonconservative loads, the concept of follower force has long been debated by scientists due to the lack of actual experimental evidence. Bigoni and Noselli's work [2] aimed to investigate flutter and divergence instability phenomena through a purely mechanical model with Coulomb friction represents a praiseworthy attempt to shed light on this issue. A two-degree-of-freedom (DOF) system, conceived as a variant of the Ziegler column, was set up experimentally. The follower load was induced by a frictional force acting on a wheel mounted at the column end, so that the rolling friction vanishes and the sliding frictional force keeps always coaxial to the column, thus representing a tangential follower force. Along this research line, in this contribution a model is elaborated that stems from the analysis of an elastically supported rigid plate that represents the behaviour of a bridge deck suspended on springs and subjected to a wind-induced force. The wind force has been simulated by a Coulomb friction force acting on a wheel mounted on the plate aerodynamic centre, so that the sliding friction force keeps perpendicular to the plate axis throughout the system motion, thus representing a follower force. To properly reproduce the wind force, the friction force is applied to the wheel by a lever mechanism wherein one of the two lever arms involves the plate rotation via a particular circular guide. The corresponding equations of motion of the bridge deck are derived in a completely dimensionless form. Depending on the mechanical characteristics of the plate and the magnitude of the friction force, stability, flutter or divergence phenomena may occur. The occurrence of these phenomena is numerically investigated by integration of the equations of motion. The development of an experimental framework of the model to corroborate these intuitions is the object of an ongoing research
Metastatic tumors to the stomach: clinical and endoscopic features.
AIM: To evaluate the clinical and endoscopic patterns in a large series of patients with metastatic tumors in the stomach. METHODS: A total of 64 patients with gastric metastases from solid malignant tumors were retrospectively examined between 1990 and 2005. The clinicopathological findings were reviewed along with tumor characteristics such as endoscopic pattern, location, size and origin of the primary sites. RESULTS: Common indications for endoscopy were anemia, bleeding and epigastric pain. Metastases presented as solitary (62.5%) or multiple (37.5%) tumors were mainly located in the middle or upper third of stomach. The main primary metastatic tumors were from breast and lung cancer and malignant melanoma. CONCLUSION: As the prognosis of cancer patients has been improving gradually, gastrointestinal (GI) metastases will be encountered more often. Endoscopic examinations should be conducted carefully in patients with malignancies, and endoscopic biopsies and information on the patient's clinical history are useful for correct diagnosis of gastric metastases
Josephson current through a long quantum wire
The dc Josephson current through a long SNS junction receives contributions
from both Andreev bound states localized in the normal region as well as from
scattering states incoming from the superconducting leads. We show that in the
limit of a long junction, this current, at low temperatures, can be expressed
entirely in terms of properties of the Andreev bound states at the Fermi
energy: the normal and Andreev reflection amplitudes at the left-hand and at
the right-hand S-N interface. This has important implications for treating
interactions in such systems.Comment: 25 pages, 5 figure
Multi-level performance-based design optimisation of steel frames with nonlinear viscous dampers
This paper presents a practical multi-level performance-based optimisation method of nonlinear viscous dampers (NVDs) for seismic retrofit of existing substandard steel frames. A Maxwell model is adopted to simulate the behaviour of the combined damper-supporting brace system, with a fractional power-law force–velocity relationship for the NVDs, while a distributed-plasticity fibre-based section approach is used to model the beam-column members thus incorporating the nonlinearity of the parent steel frame in the design process. The optimum height-wise distribution of the damping coefficients of NVDs satisfying given performance requirements is identified via a uniform damage distribution (UDD) design philosophy. The efficiency of the proposed multi-level performance-based design optimisation is illustrated through nonlinear time-history analysis of 3-, 7- and 12-storey steel frames under both artificial and natural spectrum-compatible earthquakes. Sensitivity analysis is performed to investigate the effects of initial height-wise damping distribution, convergence factor and uncertainty in design ground-motion prediction on the optimisation strategy. The efficiency of the final optimum design solution is also investigated by using drift-based, velocity-based, and energy-based UDD approaches to identify the most efficient performance index parameter for optimisation purposes. It is found that regardless of the selected performance parameter, the optimum damping distribution identified by the proposed methodology leads to frames exhibiting lower maximum inter-storey drift, local damage (maximum plastic rotation) and global damage index compared to an equal-cost uniform damping distribution. However, using drift-based UDD approach generally results in a better seismic performance. It is shown that the proposed UDD optimisation method can be efficiently used to satisfy multiple performance objectives at different intensity levels of the earthquake excitation, in line with performance-based design recommendations of current seismic codes. The proposed method is easy to implement for practical design purposes and represents a simple yet efficient tool for optimum seismic retrofit of steel frames with NVDs
Stochastic changes affect Solanum wild species following autopolyploidization
Polyploidy is very common within angiosperms, and several studies are in progress to ascertain the effects of early polyploidization at the molecular, physiological, and phenotypic level. Extensive studies are available only in synthetic allopolyploids. By contrast, less is known about the consequences of autopolyploidization. The current study aimed to assess the occurrence and extent of genetic, epigenetic, and anatomical changes occurring after oryzaline-induced polyploidization of Solanum commersonii Dunal and Solanum bulbocastanum Dunal, two diploid (2n=2×=24) potato species widely used in breeding programmes. Microsatellite analysis showed no polymorphisms between synthetic tetraploids and diploid progenitors. By contrast, analysis of DNA methylation levels indicated that subtle alterations at CG and CHG sites were present in tetraploids of both species. However, no change occurred concurrently in all tetraploids analysed with respect to their diploid parent, revealing a stochastic trend in the changes observed. The morpho-anatomical consequences of polyploidization were studied in leaf main veins and stomata. With only a few exceptions, analyses showed no clear superiority of tetraploids in terms of leaf thickness and area, vessel number, lumen size and vessel wall thickness, stomata pore length and width, guard cell width, and stomatal density com- pared with their diploid progenitors. These results are consistent with the hypothesis that there are no traits system- atically associated with autopolyploidy
The physics of spreading processes in multilayer networks
The study of networks plays a crucial role in investigating the structure,
dynamics, and function of a wide variety of complex systems in myriad
disciplines. Despite the success of traditional network analysis, standard
networks provide a limited representation of complex systems, which often
include different types of relationships (i.e., "multiplexity") among their
constituent components and/or multiple interacting subsystems. Such structural
complexity has a significant effect on both dynamics and function. Throwing
away or aggregating available structural information can generate misleading
results and be a major obstacle towards attempts to understand complex systems.
The recent "multilayer" approach for modeling networked systems explicitly
allows the incorporation of multiplexity and other features of realistic
systems. On one hand, it allows one to couple different structural
relationships by encoding them in a convenient mathematical object. On the
other hand, it also allows one to couple different dynamical processes on top
of such interconnected structures. The resulting framework plays a crucial role
in helping achieve a thorough, accurate understanding of complex systems. The
study of multilayer networks has also revealed new physical phenomena that
remain hidden when using ordinary graphs, the traditional network
representation. Here we survey progress towards attaining a deeper
understanding of spreading processes on multilayer networks, and we highlight
some of the physical phenomena related to spreading processes that emerge from
multilayer structure.Comment: 25 pages, 4 figure
Charged particle's flux measurement from PMMA irradiated by 80 MeV/u carbon ion beam
Hadrontherapy is an emerging technique in cancer therapy that uses beams of
charged particles. To meet the improved capability of hadrontherapy in matching
the dose release with the cancer position, new dose monitoring techniques need
to be developed and introduced into clinical use. The measurement of the fluxes
of the secondary particles produced by the hadron beam is of fundamental
importance in the design of any dose monitoring device and is eagerly needed to
tune Monte Carlo simulations. We report the measurements done with charged
secondary particles produced from the interaction of a 80 MeV/u fully stripped
carbon ion beam at the INFN Laboratori Nazionali del Sud, Catania, with a
Poly-methyl methacrylate target. Charged secondary particles, produced at
90 with respect to the beam axis, have been tracked with a drift
chamber, while their energy and time of flight has been measured by means of a
LYSO scintillator. Secondary protons have been identified exploiting the energy
and time of flight information, and their emission region has been
reconstructed backtracking from the drift chamber to the target. Moreover a
position scan of the target indicates that the reconstructed emission region
follows the movement of the expected Bragg peak position. Exploting the
reconstruction of the emission region, an accuracy on the Bragg peak
determination in the submillimeter range has been obtained. The measured
differential production rate for protons produced with 83 MeV and emitted at 90 with respect to the beam line is: .Comment: 13 pages, 9 figure
Polypoid vascular malformation of the small intestine.
A 56-year-old man underwent capsule endoscopy because of obscure GI bleeding. Capsule endoscopy showed a pink and somewhat nodular polypoid lesion of the small bowel partially obstructing the intestinal lumen (A). The patient underwent an ileal resection and the operative specimen showed loss of mucosal folds and the presence of an erythematous area with a polypoid formation of 3.5 × 3 cm (B). Histologic examination revealed the presence of numerous ectatic thin-walled blood vessels and a small number of thick-walled vessels in the submucosa (C and D, arrows; H&E, orig. mag. ×4), surrounded by hypertrophic muscularis mucosae and a chronic inflammatory infiltrate that infiltrated the muscularis propria; the diagnosis of polypoid angiodysplasia was suggested. There has been no recurrence of GI bleeding 14 months after the ileal resection
- …