1,470 research outputs found
Toward Enhanced State of Charge Estimation of Lithium-ion Batteries Using Optimized Machine Learning Techniques.
State of charge (SOC) is a crucial index used in the assessment of electric vehicle (EV) battery storage systems. Thus, SOC estimation of lithium-ion batteries has been widely investigated because of their fast charging, long-life cycle, and high energy density characteristics. However, precise SOC assessment of lithium-ion batteries remains challenging because of their varying characteristics under different working environments. Machine learning techniques have been widely used to design an advanced SOC estimation method without the information of battery chemical reactions, battery models, internal properties, and additional filters. Here, the capacity of optimized machine learning techniques are presented toward enhanced SOC estimation in terms of learning capability, accuracy, generalization performance, and convergence speed. We validate the proposed method through lithium-ion battery experiments, EV drive cycles, temperature, noise, and aging effects. We show that the proposed method outperforms several state-of-the-art approaches in terms of accuracy, adaptability, and robustness under diverse operating conditions
Trends of Coagulation Parameters in Human Immunodeficiency Virus Patients
Background and Objectives: HIV disease is recognized to cause inconsistencies in coagulation via various pathways during infection. Some studies have indicated that HIV-infected patients are prone to developing thrombocytopenia, thrombosis, or autoantibodies that may cause difficulties in diagnosis. This study is intended to measure the trend of coagulation parameters in Sudanese patients with HIV. Materials and Methods: A cross-sectional study was carried out in patients with HIV admitted to the Sudan National AIDS Program (SNAP) from January 2018 to December 2019. Prothrombin time (PT), partial thromboplastin time (PTT), thrombin time (TT), D-dimer (DD), hemoglobin (HB), total lymphocyte count (TLC), platelet count (PLT), and a disintegrin and metalloproteinase with thrombospondin type 1 motif, member 13 (ADAMTS13), were evaluated among HIV Sudanese patients. Results: Out of the 44 HIV patients included, 6 (13.6%) were found to have thrombotic thrombocytopenic purpura-like events and 12 (27.2%) had antiphospholipid antibodies, of whom 8 (66.6%) showed anticardiolipin antibody (1gG (75%) and IgM (25%)) and 4 showed lupus anticoagulants. The HB, TLC, and PLT values were found to be significantly lower in HIV patients than in control (p = 0.000, 0.000, and 0.050, respectively). The PT and ADAMTS13 values showed no significant difference between HIV patients and control (p = 0.613 and 0.266, respectively). The PTT, TT, and DD values were found to be augmented in HIV patients versus the control (p = 0.000). Conclusions: Thrombotic thrombocytopenic purpura-like events among HIV Sudanese patients were explored. In addition, antiphospholipid antibodies were strikingly seen in these patients. Additional research is anticipated to confirm these diagnoses
A clinical combined gadobutrol bolus and slow infusion protocol enabling angiography, inversion recovery whole heart, and late gadolinium enhancement imaging in a single study
Artificial neural network led optimization of oxyhydrogen hybridized diesel operated engine
The prevailing massive exploitation of conventional fuels has staked the energy accessibility to future generations. The gloomy peril of inflated demand and depleting fuel reservoirs in the energy sector has supposedly instigated the urgent need for reliable alternative fuels. These very issues have been addressed by introducing oxyhydrogen gas (HHO) in compression ignition (CI) engines in various flow rates with diesel for assessing brake-specific fuel consumption (BSFC) and brake thermal efficiency (BTE). The enrichment of neat diesel fuel with 10 dm3/min of HHO resulted in the most substantial decrease in BSFC and improved BTE at all test speeds in the range of 1000– 2200 rpm. Moreover, an Artificial Intelligence (AI) approach was employed for designing an ANN performance-predicting model with an engine operating on HHO. The correlation coefficients (R) of BSFC and BTE given by the ANN predicting model were 0.99764 and 0.99902, respectively. The mean root errors (MRE) of both parameters (BSFC and BTE) were within the range of 1%–3% while the root mean square errors (RMSE) were 0.0122 kg/kWh and 0.2768% for BSFC and BTE, respec-tively. In addition, ANN was coupled with the response surface methodology (RSM) technique for comprehending the individual impact of design parameters and their statistical interactions gov-erning the output parameters. The R2 values of RSM responses (BSFC and BTE) were near to 1 and MRE values were within the designated range. The comparative evaluation of ANN and RSM predicting models revealed that MRE and RMSE of RSM models are also well within the desired range but to be outrightly accurate and precise, the choice of ANN should be potentially endorsed. Thus, the combined use of ANN and RSM could be used effectively for reliable predictions and effective study of statistical interactions
Evaluation of gut modulatory and bronchodilator activities of Amaranthus spinosus Linn.
Background
The aqueous-methanolic extract of Amaranthus spinosus (A. spinosus Linn.,) whole plant, was studied for its laxative, spasmolytic and bronchodilator activities to validate some of its medicinal uses. Methods
The crude extract of A. spinosus was studied in-vivo for bronchodilator and laxative activities and in-vitro using isolated tissue preparations which were mounted in tissue baths assembly containing physiological salt solutions, maintained at 37°C and aerated with carbogen, to assess the spasmolytic effect and to find out the possible underlying mechanisms. Results
In the in-vivo experiments in mice, the administration of A. spinosus increased fecal output at doses of 100 and 300 mg/kg showing laxative activity. It also inhibited carbachol-induced bronchospasm in anesthetized rats at 1, 3, 10 and 30 mg/kg indicative of bronchodilator activity. When tested on isolated gut preparations, the plant extract showed a concentration-dependent (0.01-10.0 mg/ml) spasmogenic effect in spontaneously contracting rabbit jejunum and guinea-pig ileum. The spasmogenic effect was partially blocked in tissues pretreated with atropine (0.1 μM). When tested on K+ (80 mM)-induced sustained contractions in isolated rabbit jejunum, the plant extract caused complete relaxation and also produced a shift in the Ca++ concentration-response curves (CRCs) towards right, similar to diltiazem. In rabbit trachea, the plant extract completely inhibited K+ (80 mM) and carbachol (CCh, 1 μM)-induced contractions at 1 mg/ml but pretreatment of tissue with propranolol (1 μM), caused around 10 fold shift in the inhibitory CRCs of the plant extract constructed against CCh-induced contraction. The plant extract (up to 0.3 mg/ml) also increased both force and rate of spontaneous contractions of isolated guinea-pig atria, followed by relaxation at higher concentration (1.0-5.0 mg/ml). The cardio-stimulant effect was abolished in the presence of propranolol, similar to that of isoprenaline. Activity-directed fractionation revealed that the spasmolytic component(s) was separated in the organic fraction, whereas the spasmogenic component was concentrated in the aqueous fraction. Conclusion
These results indicate that A. spinosus possesses laxative activity partially mediated through cholinergic action. The spasmolytic effect was mediated through calcium channel blocking (CCB), while bronchodilator activity through a combination of β-adrenergic and CCB pathways, which may explain the traditional uses of A. spinosus in gut and airways disorders
FORM: An Australian method for formulating and grading recommendations in evidence-based clinical guidelines
Extent: 8p.BACKGROUND: Clinical practice guidelines are an important element of evidence-based practice. Considering an often complicated body of evidence can be problematic for guideline developers, who in the past may have resorted to using levels of evidence of individual studies as a quasi-indicator for the strength of a recommendation. This paper reports on the production and trial of a methodology and associated processes to assist Australian guideline developers in considering a body of evidence and grading the resulting guideline recommendations. METHODS: In recognition of the complexities of clinical guidelines and the multiple factors that influence choice in health care, a working group of experienced guideline consultants was formed under the auspices of the Australian National Health and Medical Research Council (NHMRC) to produce and pilot a framework to formulate and grade guideline recommendations. Consultation with national and international experts and extensive piloting informed the process. RESULTS: The FORM framework consists of five components (evidence base, consistency, clinical impact, generalisability and applicability) which are used by guideline developers to structure their decisions on how to convey the strength of a recommendation through wording and grading via a considered judgement form. In parallel (but separate from the grading process) guideline developers are asked to consider implementation implications for each recommendation. CONCLUSIONS: The framework has now been widely adopted by Australian guideline developers who find it to be a logical and intuitive way to formulate and grade recommendations in clinical practice guidelines.Susan Hillier, Karen Grimmer-Somers, Tracy Merlin, Philippa Middleton, Janet Salisbury, Rebecca Tooher and Adele Westo
Titanium based cranial reconstruction using incremental sheet forming
In this paper, we report recent work in cranial plate manufacturing using incremental sheet forming (ISF) process. With a typical cranial shape, the ISF process was used to manufacture the titanium cranial shape by using different ISF tooling solutions with and without backing plates. Detailed evaluation of the ISF process including material deformation and thinning, geometric accuracy and surface finish was conducted by using a combination of experimental testing and Finite Element (FE) simulation. The results show that satisfactory cranial shape can be achieved with sufficient accuracy and surface finish by using a feature based tool path generation method and new ISF tooling design. The results also demonstrate that the ISF based cranial reconstruction has the potential to achieve considerable lead time reduction as compared to conventional methods for cranial plate manufacturing. This outcome indicates that there is a potential for the ISF process to achieve technological advances and economic benefits as well as improvement to quality of life
Comparative Demography of the Spider Mite, Oligonychus afrasiaticus, on four Date Palm Varieties in Southwestern Tunisia
The date palm mite, Oligonychus afrasiaticus (McGregor) (Acari: Tetranychidae), is a serious pest of palm date fruits. Life cycle, fecundity, and longevity of this mite were studied on fruits of four date palms, Phoenix dactylifera L. (Arecales: Arecaceae)(varieties: Deglet Noor, Alig, Kentichi, and Besser), under laboratory conditions at 27 = 1 °C, 60 ± 10% RH. Total development time of immature female was shorter on Deglet Noor fruits than on the other cultivars. O. afrasiaticus on Deglet Noor had the highest total fecundity per female, while low fecundity values occurred on Besser. The comparison of intrinsic rates of natural increase (rm), net reproductive rates (Ro), and the survival rates of immature stage of O. afrasiaticus on the host plants suggests that O. afrasiaticus performs better on Deglet Noor fruits. The mite feeding on Alig showed the lowest intrinsic rate of natural population increase (rm = 0.103 day 1). The estimation of difference in susceptibility of cultivars to O. afrasiaticus is crucial for developing efficient pest control programs. Indeed, less susceptible cultivars can either be left unsprayed or sprayed at low threshold
Environmental Assesment Of Al-Hillah River Pollution at Babil Governorate (IRAQ)
In this study, the environmental characteristics of Al-Hillah River were studied using geoinformatics applications, which is one of the geospatial techniques (GST). Applying this methodology, a geographic information system was developed, and it was supplied with laboratory data for the physical and chemical properties of 16 parameters for 2021. These data were linked to their spatial locations, using radar imagery of the Digital Elevation Model (Shuttle Radar Topography Mission), and Landsat ETM+7 satellite image. The results indicated that Al-Hillah River was affected by the liquid discharges of factories, cities, and farms spread on its sides, especially in the cities of Sadat Al-Hindiya, Al-Hillah, and Al-Hashimiyah. The seasonal changes in the climate affected some characteristics, including water temperature, pH, turbidity, total dissolved solids, and total hardness. The study showed that the concentration of sulfate (SO4) has risen above the permissible limits for the waters of Iraqi rivers. There are relatively high hardness and alkalinity values, but they were within the permissible limits. The study also showed that most of the results of environmental parameters that were used in the laboratory, were within the permissible limits of Iraqi water, except for sulfates. The justification for conducting this study is to help government agencies and decision-makers to adopt a correct vision for development projects that serve Babil Governorate. Also, it is the first time that the environmental characteristics of Al-Hillah River are studied using geoinformatics applications
- …