Use of Global Electrochemical Techniques to Characterize Localized Corrosion Behavior on Aluminum Alloys

Precipitated intermetallic phases strengthen aluminum aircraft alloys; these inclusions also establish localized electrochemical environments, significantly influencing the bulk corrosion behavior of such alloys. To gain insight on the effects of intermetallic phases on the bulk corrosion behavior, two established forms of electrochemical characterization techniques were used, polarization scans and impedance spectroscopy. This effort was undertaken to: Provide a statistical body of electrochemical data for aluminum alloys, Provide fundamental electrochemical parameters to aide in a continuum scale modeling effort, Validate the effect of solution chemistry on bulk corrosion behavior, Determine the influence of precipitated intermetallic phases on the bulk corrosion behavior, Decouple the metal-coating interface behavior from bulk corrosion behavior in continuing tests on coated aluminum

Simulation of the Relaxation Potential Profile of an ac-dc-ac Test

The relaxation period of the accelerated ac-dc-ac test for coatings is associated with the transient electrochemistry that occurs when the immersed coated system is allowed to return to a stable open-circuit condition after being subjected to a cathodic potential. A mathematical model of the transient electrochemistry that occurs during this relaxation period is presented for coated aluminum. Expressions for the corrosion potential and corrosion current as functions of the local pH at the metal-coating interface were developed using reported experimental results. These expressions enabled the simulation of the transient electrochemistry under the constraint of balanced anodic and cathodic current densities. Regression of the transient relaxation potential profiles to exponential decay functions provided time-constant characterization of the profiles. Simulated results are presented that demonstrate the influences of the coating\u27s porosity and thickness, the applied dc potential and the metal-coating interface condition on the time-constants associated with the relaxation profile. Interpretation of experimentally reported relaxation potential profiles supported the analysis of the simulated results

Toward Improving Ambient Volta Potential Measurements with SKPFM for Corrosion Studies

Scanning Kelvin probe force microscopy (SKPFM) is used in corrosion studies to quantify the relative nobility of different microstructural features present within complex metallic systems and thereby elucidate possible corrosion initiation sites. However, Volta potential differences (VPDs) measured via SKPFM in the literature for metal alloys exhibit large variability, making interpretation and application for corrosion studies difficult. We have developed an improved method for referencing SKPFM VPDs by quantifying the closely related work function of the probe relative to an inert gold standard whose modified work function is calculated via density functional theory (DFT). By measuring and tracking changes in the probe vs. gold VPD, this method compensates for some of the complex effects that cause changes in an individual probe\u27s work function. Furthermore, it provides a path toward direct, quantitative comparison of SKPFM results obtained by different researchers. Application of this method to a Cu-Ag-Ti eutectic braze of a steel sample imaged with multiple SKPFM probes of differing compositions led to enhanced repeatability both within and among probe types, as well as enabled the calculation of modified work function values for each of the microstructural constituents present

TiO2 Coatings Formed by Atomic Layer Deposition for Enhanced Corrosion Performance of Mg-biomaterials

Magnesium (Mg) alloys have experienced increased attention in the area of biomaterials due to Mg being considered a resorbable biomaterial. Mg alloy implants can potentially be designed to degrade in the body, thus an implant would not remain in the body for longer than is needed to perform its task. Mg and many of its alloys are considered to be biocompatible and non-toxic in the body; however, due to the high rate at which Mg degrades a negative host response is expected. A novel approach to inhibit corrosion rate using thin film coatings on a Mg alloy (AZ31B) via atomic layer deposition (ALD) is proposed. ALD is based on saturated surface reactions on the substrate unlike other thin film deposition techniques such as chemical vapor deposition (CVD) and physical vapor deposition (PVD). Sequentially-performed surface reactions between the substrate and precursor molecules water and titanium tetrachloride (H2O , TiCl4) result in thin film growth of amorphous titanium dioxide (TiO2). TiO2 is grown in an atomic layer-by-layer fashion during ALD allowing sub-nanometer thickness control of growth, with excellent coating uniformity and step coverage. TiO2 coatings and their impact on the corrosion resistance of AZ31B were characterized using atomic force microscopy, scanning electron microscopy, electrochemical impedance spectroscopy, and linear polarization measurements

Rationale, Design, and Baseline Characteristics of WalkIT Arizona: A Factorial Randomized Trial Testing Adaptive Goals and Financial Reinforcement to Increase Walking Across Higher and Lower Walkable Neighborhoods

Little change over the decades has been seen in adults meeting moderate-to-vigorous physical activity (MVPA) guidelines. Numerous individual-level interventions to increase MVPA have been designed, mostly static interventions without consideration for neighborhood context. Recent technologies make adaptive interventions for MVPA feasible. Unlike static interventions, adaptive intervention components (e.g., goal setting) adjust frequently to an individual\u27s performance. Such technologies also allow for more precise delivery of “smaller, sooner incentives” that may result in greater MVPA than “larger, later incentives”. Combined, these factors could enhance MVPA adoption. Additionally, a central tenet of ecological models is that MVPA is sensitive to neighborhood environment design; lower-walkable neighborhoods constrain MVPA adoption and maintenance, limiting the effects of individual-level interventions. Higher-walkable neighborhoods are hypothesized to enhance MVPA interventions. Few prospective studies have addressed this premise. This report describes the rationale, design, intervention components, and baseline sample of a study testing individual-level adaptive goal-setting and incentive interventions for MVPA adoption and maintenance over 2 years among adults from neighborhoods known to vary in neighborhood walkability. We scaled these evidenced-based interventions and tested them against static-goal-setting and delayed-incentive comparisons in a 2 × 2 factorial randomized trial to increase MVPA among 512 healthy insufficiently-active adults. Participants (64.3% female, M age = 45.5 ± 9.1 years, M BMI = 33.9 ± 7.3 kg/m2, 18.8% Hispanic, 84.0% White) were recruited from May 2016 to May 2018 from block groups ranked on GIS-measured neighborhood walkability and socioeconomic status (SES) and classified into four neighborhood types: “high walkable/high SES,” “high walkable/low SES,” “low walkable/high SES,” and “low walkable/low SES.” Results from this ongoing study will provide evidence for some of the central research questions of ecological models

Further Sunyaev-Zel'dovich observations of two Planck ERCSC clusters with the Arcminute Microkelvin Imager

We present follow-up observations of two galaxy clusters detected blindly via the Sunyaev-Zel'dovich (SZ) effect and released in the Planck Early Release Compact Source Catalogue. We use the Arcminute Microkelvin Imager, a dual-array 14-18 GHz radio interferometer. After radio source subtraction, we find a SZ decrement of integrated flux density -1.08+/-0.10 mJy toward PLCKESZ G121.11+57.01, and improve the position measurement of the cluster, finding the centre to be RA 12 59 36.4, Dec +60 04 46.8, to an accuracy of 20 arcseconds. The region of PLCKESZ G115.71+17.52 contains strong extended emission, so we are unable to confirm the presence of this cluster via the SZ effect.Comment: 4 tables, 3 figures, revised after referee's comments and resubmitted to MNRA

CASTER - a concept for a Black Hole Finder Probe based on the use of new scintillator technologies

The primary scientific mission of the Black Hole Finder Probe (BHFP), part of the NASA Beyond Einstein program, is to survey the local Universe for black holes over a wide range of mass and accretion rate. One approach to such a survey is a hard X-ray coded-aperture imaging mission operating in the 10--600 keV energy band, a spectral range that is considered to be especially useful in the detection of black hole sources. The development of new inorganic scintillator materials provides improved performance (for example, with regards to energy resolution and timing) that is well suited to the BHFP science requirements. Detection planes formed with these materials coupled with a new generation of readout devices represent a major advancement in the performance capabilities of scintillator-based gamma cameras. Here, we discuss the Coded Aperture Survey Telescope for Energetic Radiation (CASTER), a concept that represents a BHFP based on the use of the latest scintillator technology.Comment: 12 pages; conference paper presented at the SPIE conference "UV, X-Ray, and Gamma-Ray Space Instrumentation for Astronomy XIV." To be published in SPIE Conference Proceedings, vol. 589

Transgranular Stress Corrosion Cracking of 304L Stainless Steel Pipe Clamps in Direct Use Geothermal Water Heating Applications

Direct use geothermal heating relies on heat extracted from naturally occurring geothermal water sources to provide heating needs for commercial and residential use. The city of Boise, Idaho maintains the largest district geothermal heating system in the United States, utilizing a source of geothermal water at 80 °C. 304 Stainless steel (UNS S30400) pipe clamps are used throughout the system as repair seals and for new service connections. Occasionally unexpected fracture of the stainless steel clamps occurs with time-in-service periods as short as 1 year. A failure analysis was conducted, including visual, microstructural, compositional, and mechanical characterization, to determine the cause and source of the degradation. Cracking of the clamps was limited to localized regions with the remainder of the clamp unaffected. Branched, brittle cracks were observed in the failure region and exhibited transgranular propagation. Based on the temperature, available moisture, stress level, and type of material used it was determined that the likely cause of failure was neutral pH, dilute chloride-induced stress corrosion cracking. Based on this failure analysis, geothermal or other buried heated water systems must consider protective measures or more SCC-resistant materials to prevent susceptible conditions from developing, compared to conventional water systems, to ensure maximum lifetime performance

Microwave observations of spinning dust emission in NGC6946

We report new cm-wave measurements at five frequencies between 15 and 18GHz of the continuum emission from the reportedly anomalous "region 4" of the nearby galaxy NGC6946. We find that the emission in this frequency range is significantly in excess of that measured at 8.5GHz, but has a spectrum from 15-18GHz consistent with optically thin free-free emission from a compact HII region. In combination with previously published data we fit four emission models containing different continuum components using the Bayesian spectrum analysis package radiospec. These fits show that, in combination with data at other frequencies, a model with a spinning dust component is slightly preferred to those that possess better-established emission mechanisms.Comment: submitted MNRA