Dataset of characteristic remanent magnetization and magnetic properties of early Pliocene sediments from IODP Site U1467 (Maldives platform)

This data article describes data of magnetic stratigraphy and anisotropy of isothermal remanent magnetization (AIRM) from "Magnetic properties of early Pliocene sediments from IODP Site U1467 (Maldives platform) reveal changes in the monsoon system" [1]. Acquisition of isothermal magnetization on pilot samples and anisotropy of isothermal remanent magnetization are reported as raw data; magnetostratigraphic data are reported as characteristic magnetization (ChRM).info:eu-repo/semantics/publishedVersio

Magnetic properties of early Pliocene sediments from IODP Site U1467 (Maldives platform) reveal changes in the monsoon system

We report a study of the magnetic stratigraphy and the anisotropy of isothermal remanent magnetization of Pliocene sediments from International Ocean Discovery Program (IODP) Site U1467 drilled in the Maldives platform (Indian Ocean) during Exp. 359. Magnetic stratigraphy gives a precise record of geomagnetic reversals of the early Pliocene from approximately 5.3 Ma to 3.1 Ma providing a detailed age model in an interval where the biostratigraphic record is scarce. We use the anisotropy of isothermal remanent magnetization (AIRM) to investigate the statistical orientation of fine magnetic particles and provide data on the strength and direction of bottom currents during the early Pliocene. The strength of bottom currents recorded by the AIRM, shows a prominent increase at the top of Chron C3n.1n (about 4.2 Ma), and the current direction (NE - SW) is consistent with that of modern instrumental measurements. Since bottom currents in the Maldives are driven by the monsoon, we speculate that the 4.2 Ma increase of bottom currents could mark the onset of the present-day setting, probably related to the coeval uplift phase of the Himalayan plateau

Carbonate delta drift: a new sediment drift type

Based on high-resolution reflection seismic and core data from IODP Expedition 359 we present a new channel-related drift type attached to a carbonate platform slope, which we termed delta drift. Like a river delta, it is comprised of several stacked lobes and connected to a point source. The delta drifts were deposited at the exit of two gateways that connect the Inner Sea of the Maldives carbonate platform with the open ocean. The channels served as conduits focusing and accelerating the water flow; Entrained material was deposited at their mouth where the flows relaxed. The lobe-shaped calcareous sediment drifts must have formed under persistent water through flow. Sediment supply was relatively high and continuous, resulting in an average sedimentation rate of 17 cm ka−1. The two delta drifts occupy 342 and 384 km2, respectively; with a depositional relief of approximately 500 m. They have a sigmoidal clinoform reflection pattern with a particular convex upward bending of the foresets. In the Maldives the drift onset marks the transition from a sea-level controlled to a progressively current dominated depositional regime. This major event occurred in the Serravallian about 13 Ma ago, leading to the partial drowning of the carbonate platform and the creation of shallow seaways. The initial bank-enclosed topography resembles an “empty bucket” geometry which is rapidly filled by the drift sediments that aggrade and prograde into the basin. Thereby the depositional environment of the delta drifts changes from deep water (>500) to shallow-water conditions at their topsets, indicated by the overall coarsening upward trend in grain size and the presence of shallow water large benthic foraminifers at their top

Correction to:A two million year record of low-latitude aridity linked to continental weathering from the Maldives (Progress in Earth and Planetary Science, (2018), 5, 1, (86), 10.1186/s40645-018-0238-x)

In the original version of this article (Kunkelova et al. 2018), published on 18 December 2018, there was 1 error in the author name of Dr. Yu

The abrupt onset of the modern South Asian Monsoon winds

The South Asian Monson (SAM) is one of the most intense climatic elements yet its initiation and variations are not well established. Dating the deposits of SAM wind-driven currents in IODP cores from the Maldives yields an age of 12. 9 Ma indicating an abrupt SAM onset, over a short period of 300 kyrs. This coincided with the Indian Ocean Oxygen Minimum Zone expansion as revealed by geochemical tracers and the onset of upwelling reflected by the sediment's content of particulate organic matter. A weaker 'proto-monsoon' existed between 12.9 and 25 Ma, as mirrored by the sedimentary signature of dust influx. Abrupt SAM initiation favors a strong influence of climate in addition to the tectonic control, and we propose that the post Miocene Climate Optimum cooling, together with increased continentalization and establishment of the bipolar ocean circulation, i.e. the beginning of the modern world, shifted the monsoon over a threshold towards the modern system

A two million year record of low-latitude aridity linked to continental weathering from the Maldives

Tem uma correção em http://hdl.handle.net/10400.1/12390Indian-Asian monsoon has oscillated between warm/wet interglacial periods and cool/dry glacial periods with periodicities closely linked to variations in Earth’s orbital parameters. However, processes that control wet versus dry, i.e. aridity cyclical periods on the orbital time-scale in the low latitudes of the Indian-Asian continent remain poorly understood because records over millions of years are scarce. The sedimentary record from International Ocean Discovery Program (IODP) Expedition 359 provides a well-preserved, high-resolution, continuous archive of lithogenic input from the Maldives reflecting on low-latitude aridity cycles. Variability within the lithogenic component of sedimentary deposits of the Maldives results from changes in monsoon-controlled sedimentary sources. Here, we present X-ray fluorescence (XRF) core-scanning results from IODP Site U1467 for the past two million years, allowing full investigation of orbital periodicities. We specifically use the Fe/K as a terrestrial climate proxy reflecting on wet versus dry conditions in the source areas of the Indian-Asian landmass, or from further afield. The Fe/K record shows orbitally forced cycles reflecting on changes in the relative importance of aeolian (stronger winter monsoon) during glacial periods versus fluvial supply (stronger summer monsoon) during interglacial periods. For our chronology, we tuned the Fe/K cycles to precessional insolation changes, linking Fe/K maxima/minima to insolation minima/maxima with zero phase lag. Wavelet and spectral analyses of the Fe/K record show increased dominance of the 100 kyr cycles after the Mid Pleistocene Transition (MPT) at 1.25 Ma in tandem with the global ice volume benthic δ18O data (LR04 record). In contrast to the LR04 record, the Fe/K profile resolves 100-kyr-like cycles around the 130 kyr frequency band in the interval from 1.25 to 2 million years. These 100-kyr-like cycles likely form by bundling of two or three obliquity cycles, indicating that low-latitude Indian-Asian climate variability reflects on increased tilt sensitivity to regional eccentricity insolation changes (pacing tilt cycles) prior to the MPT. The implication of appearance of the 100 kyr cycles in the LR04 and the Fe/K records since the MPT suggests strengthening of a climate link between the low and high latitudes during this period of climate transition.SFRH/BPD/96960/2013; PTDC/MAR-PRO/3396/2014info:eu-repo/semantics/publishedVersio

Furrow-and-ridge morphology on rockglaciers explained by gravity-driven buckle folding: a case study from the Murtèl rockglacier (Switzerland)

Rockglaciers often feature a prominent furrow-and-ridge topography. Previous studies suggest that this morphology develops due to longitudinal compressive flow during rockglacier creep; however, no satisfactory mechanical/ physical model has been provided explaining both the observed characteristic wavelength and the growth rate necessary to amplify the structure to its final size. Our study identifies viscous buckle folding as the dominant process forming the furrow-and-ridge morphology on rockglaciers. Buckle folding is the mechanical response of layered viscous media to layer-parallel compression. The Murtèl rockglacier (Switzerland) exhibits a spectacular furrow-and-ridge morphology and is chosen as a case study. Its well-determined internal structure can be approximated by two layers: the upper 3–5 m thick active layer consisting mainly of rock boulders and fragments above a thick, almost pure, ice layer, both assumed to exhibit viscous rheology. We analysed a high-resolution digital elevation model of the Murtèl rockglacier using analytical buckle-folding expressions, which provide quantitative relationships between the observed wavelength, the layer thickness and the effective viscosity ratio between the folded layer and the underlying ice. Based on this geometrical and rheological information, we developed a finite-element model to simulate dynamical gravity-driven two-dimensional rockglacier flow. A buckling instability of the upper layer develops and amplifies self-consistently, reproducing several key features of the Murtèl rockglacier (wavelength, amplitude and distribution of the furrow-and-ridge morphology), as well as the quasi-parabolic deformation profile observed in boreholes. Comparing our model with published surface flow velocities constrains the time necessary to produce the furrow-and-ridge morphology to about 1000–1500 years

Carbonate delta drift: A new sediment drift type (vol 401, pg 98, 2018)

The authors regret the mistake in the drawing of the delta drift architecture in figure 11. The authors would like to apologise for any inconvenience caused. [Figure presented]</p

Guidelines for the use and interpretation of assays for monitoring autophagy

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field