Electron beam-induced current imaging with two-angstrom resolution.

An electron microscope's primary beam simultaneously ejects secondary electrons (SEs) from the sample and generates electron beam-induced currents (EBICs) in the sample. Both signals can be captured and digitized to produce images. The off-sample Everhart-Thornley detectors that are common in scanning electron microscopes (SEMs) can detect SEs with low noise and high bandwidth. However, the transimpedance amplifiers appropriate for detecting EBICs do not have such good performance, which makes accessing the benefits of EBIC imaging at high-resolution relatively more challenging. Here we report lattice-resolution imaging via detection of the EBIC produced by SE emission (SEEBIC). We use an aberration-corrected scanning transmission electron microscope (STEM), and image both microfabricated devices and standard calibration grids

Irreversibility at macromolecular scales in the flake graphite of the lithium-ion battery anode.

Charging a commercial lithium-ion battery intercalates lithium into the graphite-based anode, creating various lithium carbide structures. Despite their economic importance, these structures and the dynamics of their charging-discharging transitions are not well-understood. We have videoed single microcrystals of high-quality, natural graphite undergoing multiple lithiation-delithiation cycles. Because the equilibrium lithium-carbide compounds corresponding to full, half, and one-third charge are gold, red, and blue respectively, video observations give direct insight into both the macromolecular structures and the kinematics of charging and discharging. We find that the transport during the first lithiation is slow and orderly, and follows the core-shell or shrinking annuli model with phase boundaries moving at constant velocities (i.e. non-diffusively). Subsequent lithiations are markedly different, showing transport that is both faster and disorderly, which indicates that the initially pristine graphite is irreversibly and considerably altered during the first cycle. In all cases deintercalation is not the time-reverse of intercalation. These findings both illustrate how lithium enters nearly defect-free host material, and highlight the differences between the idealized case and an actual, cycling graphite anode

Noise Considerations for Manned Reentry Vehicles

Noise measurements pertaining mainly to the static firing, launch, 0 and exit flight phases are presented for three rocket-powered vehicles 4 in the Project Mercury test program. Both internal and external data 4 from onboard recordings are presented for a range of Mach numbers and dynamic pressures and for different external vehicle shapes. The main sources of noise are noted to be the rocket engines during static firing and launch and the aerodynamic boundary layer during the high-dynamic-pressure portions of the flight. Rocket-engine noise measurements along the surface of the Mercury Big Joe vehicle were noted to correlate well with data from small models and available data for other large rockets. Measurements have indicated that the aerodynamic noise pressures increase approximately as the dynamic pressure increases and may vary according to the external shape of the vehicle, the highest noise levels being associated with conditions of flow separation. There is also a trend for the aerodynamic noise spectra to peak at higher frequencies as the flight Mach number increases

Risk factors for cardiovascular disease in people with idiopathic pulmonary fibrosis: a population-based study

OBJECTIVE: People with idiopathic pulmonary fibrosis (IPF) have been shown to be at an increased risk for cardiovascular (CV) disease, but reasons for this are unknown. The aim of this study was to compare the prevalence of common CV risk factors in people with IPF and the general population and establish the incidence of ischemic heart disease (IHD) and stroke after the diagnosis of IPF, controlling for these risk factors. METHODS: We used data from a large, UK primary care database to identify incident cases of IPF and matched general-population control subjects. We compared the prevalence of risk factors for CV disease and prescription of CV medications in people with IPF (before diagnosis) with control subjects from the general population and assessed the incidence of IHD and stroke in people with IPF (after diagnosis) compared with control subjects. RESULTS: We identified 3,211 cases of IPF and 12,307 control subjects. Patients with IPF were more likely to have a record of hypertension (OR, 1.31; 95% CI, 1.19-1.44), and diabetes (OR, 1.20; 95% CI, 1.07-1.34) compared with control subjects; they were also more likely to have been prescribed several CV drugs. The rate of first-time IHD events was more than twice as high in patients than control subjects (rate ratio, 2.32; 95% CI, 1.85-2.93; P < .001), but the incidence of stroke was only marginally higher (P = .09). Rate ratios for IHD and stroke were not altered substantially after adjusting for CV risk factors. CONCLUSIONS: Several CV risk factors were more prevalent in people with IPF; however, this did not account for the increased rate of IHD in this group of patients

STEM EBIC Mapping of the Metal-Insulator Transition in Thin-film NbO 2

This article has been published in a revised form in Microscopy and Microanalysis https://doi.org/10.1017/S1431927617007802. This version is free to view and download for private research and study only. Not for re-distribution, re-sale or use in derivative works. © copyright holder

Differential electron yield imaging with STXM

Total electron yield (TEY) imaging is an established scanning transmission X-ray microscopy (STXM) technique that gives varying contrast based on a sample's geometry, elemental composition, and electrical conductivity. However, the TEY-STXM signal is determined solely by the electrons that the beam ejects from the sample. A related technique, X-ray beam-induced current (XBIC) imaging, is sensitive to electrons and holes independently, but requires electric fields in the sample. Here we report that multi-electrode devices can be wired to produce differential electron yield (DEY) contrast, which is also independently sensitive to electrons and holes, but does not require an electric field. Depending on whether the region illuminated by the focused STXM beam is better connected to one electrode or another, the DEY-STXM contrast changes sign. DEY-STXM images thus provide a vivid map of a device's connectivity landscape, which can be key to understanding device function and failure. To demonstrate an application in the area of failure analysis, we image a 100~nm, lithographically-defined aluminum nanowire that has failed after being stressed with a large current density.Comment: 8 pages, 6 figure