Wavelength-multiplexed duplex transceiver based on III-V/Si hybrid integration for off-chip and on-chip optical interconnects

A six-channel wavelength-division-multiplexed optical transceiver with a compact footprint of 1.5 x 0.65 mm(2) for off-chip and on-chip interconnects is demonstrated on a single silicon-on-insulator chip. An arrayed waveguide grating is used as the (de)multiplexer, and III-V electroabsorption sections fabricated by hybrid integration technology are used as both modulators and detectors, which also enable duplex links. The 30-Gb/s capacity for each of the six wavelength channels for the off-chip transceiver is demonstrated. For the on-chip interconnect, an electrical-to-electrical 3-dB bandwidth of 13 GHz and a data rate of 30 Gb/s per wavelength are achieved

Low driving voltage band-filling-based III-V-on-silicon electroabsorption modulator

A

Exceptional river gorge formation from unexceptional floods

An understanding of rates and mechanisms of incision and knickpoint retreat in bedrock rivers is fundamental to perceptions of landscape response to external drivers, yet only sparse field data are available. Here we present eye witness accounts and quantitative surveys of rapid, amphitheatre-headed gorge formation in unweathered granite from the overtopping of a rock-cut dam spillway by small-moderate floods (~100–1,500 m3 s−1). The amount of erosion demonstrates no relationship with flood magnitude or bedload availability. Instead, structural pattern of the bedrock through faults and joints appears to be the primary control on landscape change. These discontinuities facilitate rapid erosion (>270 m headward retreat; ~100 m incision; and ~160 m widening over 6 years) principally through fluvial plucking and block topple. The example demonstrates the potential for extremely rapid transient bedrock erosion even when rocks are mechanically strong and flood discharges are moderate. These observations are relevant to perceived models of gorge formation and knickpoint retreat

An experimental investigation into the dimensional error of powder-binder three-dimensional printing

This paper is an experimental investigation into the dimensional error of the rapid prototyping additive process of powder-binder three-dimensional printing. Ten replicates of a purpose-designed part were produced using a three-dimensional printer, and measurements of the internal and external features of all surfaces were made using a general purpose coordinate measuring machine. The results reveal that the bases of all replicates (nominally flat) have a concave curvature, producing a flatness error of the primary datum. This is in contrast to findings regarding other three-dimensional printing processes, widely reported in the literature, where a convex curvature was observed. All external surfaces investigated in this study showed positive deviation from nominal values, especially in the z-axis. The z-axis error consisted of a consistent positive cumulative error and a different constant error in different replicates. By compensating for datum surface error, the average total height error of the test parts can be reduced by 25.52 %. All the dimensional errors are hypothesised to be explained by expansion and the subsequent distortion caused by layer interaction during and after the printing process

Anticancer Gene Transfer for Cancer Gene Therapy

Gene therapy vectors are among the treatments currently used to treat malignant tumors. Gene therapy vectors use a specific therapeutic transgene that causes death in cancer cells. In early attempts at gene therapy, therapeutic transgenes were driven by non-specific vectors which induced toxicity to normal cells in addition to the cancer cells. Recently, novel cancer specific viral vectors have been developed that target cancer cells leaving normal cells unharmed. Here we review such cancer specific gene therapy systems currently used in the treatment of cancer and discuss the major challenges and future directions in this field

Fully spray-coated triple-cation perovskite solar cells

We use ultrasonic spray-coating to sequentially deposit thin films of tin oxide, a triple-cation perovskite and spiro-OMeTAD, allowing us fabricate perovskite solar cells (PSCs) with a champion reverse scan power conversion efficiency (PCE) of 19.4% on small-area substrates. We show that the use of spray-deposition permits us to rapidly (>80 mm s−1) coat 25 mm × 75 mm substrates that were divided into a series of devices each with an active area of 15.4 mm2, yielding an average PCE of 10.3% and a peak PCE of 16.3%. By connecting seven 15.4 mm2 devices in parallel on a single substrate, we create a device having an effective active area of 1.08 cm2 and a PCE of 12.7%. This work demonstrates the possibility for spray-coating to fabricate high efficiency and low-cost perovskite solar cells at speed

Association of HLA-A, B, DRB1 alleles and haplotypes with HIV-1 infection in Chongqing, China

<p>Abstract</p> <p>Background</p> <p>The human immunodeficiency virus type 1(HIV-1) epidemic in Chongqing, China, is increasing rapidly with the dominant subtype of CRF07_BC over the past 3 years. Since human leukocyte antigen (HLA) polymorphisms have shown strong association with susceptibility/resistance to HIV-1 infection from individuals with different ethnic backgrounds, a recent investigation on frequencies of HLA class I and class II alleles in a Chinese cohort also indicated that similar correlation existed in HIV infected individuals from several provinces in China, however, such information is unavailable in Chongqing, southwest China.</p> <p>Methods</p> <p>In this population-based study, we performed polymerase chain reaction analysis with sequence-specific oligonucleotide probes (PCR-SSOP) for intermediate-low-resolution HLA typing in a cohort of 549 HIV-1 infected individuals, another 2475 healthy subjects from the Han nationality in Chongqing, China, were selected as population control. We compared frequencies of HLA-A, B, DRB1 alleles, haplotypes and genotypes between the two groups, and analyzed their association with HIV-1 susceptibility or resistance.</p> <p>Results</p> <p>The genetic profile of HLA (A, B, DRB1) alleles of HIV-1 infected individuals from Chongqing Han of China was obtained. Several alleles of HLA-B such as B*46 (P = 0.001, OR = 1.38, 95%CI = 1.13-1.68), B*1501G(B62) (P = 0.013, OR = 1.42, 95%CI = 1.08-1.88), B*67 (P = 0.022, OR = 2.76, 95%CI = 1.16-6.57), B*37 (P = 0.014, OR = 1.93, 95%CI = 1.14-3.28) and B*52 (P = 0.038, OR = 1.64, 95%CI = 1.03-2.61) were observed to have association with susceptibility to HIV-1 infection in this population. In addition, the haplotype analysis revealed that A*11-B*46, A*24-B*54 and A*01-B*37 for 2-locus, and A*11-B*46-DRB1*09, A*02-B*46-DRB1*08, A*11-B*4001G-DRB1*15, A*02-B*4001G-DRB1*04, A*11-B*46-DRB1*08 and A*02-B*4001G-DRB1*12 for 3-locus had significantly overrepresented in HIV-1 infected individuals, whereas A*11-B*1502G, A*11-B*1502G-DRB1*12 and A*33-B*58-DRB1*13 were underrepresented. However, the low-resolution homozygosity of HLA-A, B, DRB1 loci and HLA-Bw4/Bw6 genotypes did not differ significantly between the two groups.</p> <p>Conclusion</p> <p>These results may contribute to the database of HLA profiles in HIV-1 infected Chinese population, consequently, the association of certain HLA alleles with susceptibility or resistance to HIV-1 infection would provide with clues in choosing proper preventive strategies against HIV-1 infection and developing effective HIV-1 vaccines in Chinese population, especially for those in southwest China.</p

Hepatocyte Growth Factor Increases Osteopontin Expression in Human Osteoblasts through PI3K, Akt, c-Src, and AP-1 Signaling Pathway

BACKGROUND: Hepatocyte growth factor (HGF) has been demonstrated to stimulate osteoblast proliferation and participated bone remodeling. Osteopontin (OPN) is a secreted phosphoglycoprotein that belongs to the SIBLING family and is present during bone mineralization. However, the effects of HGF on OPN expression in human osteoblasts are large unknown. METHODOLOGY/PRINCIPAL FINDINGS: Here we found that HGF induced OPN expression in human osteoblasts dose-dependently. HGF-mediated OPN production was attenuated by c-Met inhibitor and siRNA. Pretreatment of osteoblasts with PI3K inhibitor (Ly294002), Akt inhibitor, c-Src inhibitor (PP2), or AP-1 inhibitor (curcumin) blocked the potentiating action of HGF. Stimulation of osteoblasts with HGF enhanced PI3K, Akt, and c-Src activation. In addition, incubation of cells with HGF also increased c-Jun phosphorylation, AP-1-luciferase activity, and c-Jun binding to the AP-1 element on the OPN promoter. HGF-mediated AP-1-luciferase activity and c-Jun binding to the AP-1 element was reduced by c-Met inhibitor, Ly294002, Akt inhibitor, and PP2. CONCLUSIONS/SIGNIFICANCE: Our results suggest that the interaction between HGF and c-Met increases OPN expression in human osteoblasts via the PI3K, Akt, c-Src, c-Jun, and AP-1 signaling pathway

Discovery of a Non-Peptidic Inhibitor of West Nile Virus NS3 Protease by High-Throughput Docking

An estimated 2.5 billion people are at risk of diseases caused by dengue and West Nile virus. As of today, there are neither vaccines to prevent nor drugs to cure the severe infections caused by these viruses. The NS3 protease is one of the most promising targets for drug development against West Nile virus because it is an essential enzyme for viral replication and because success has been demonstrated with the closely related hepatitis C virus protease. We have discovered a small molecule that inhibits the NS3 protease of West Nile virus by computer-aided high-throughput docking, and validated it using three experimental techniques. The inhibitor has potential to be developed to a drug candidate to combat West Nile virus infections